The XDA-Forum thread relating to the Xposed Note3 Ultra Power Saving Mode module is on the following link:
Please visit the link above for more info about the xposed module and for what this unlock key app is intended for.
WARNING: Please do not buy it if you do not know what it is intended for or if you do not know what xposed framework is or if you are not able to make the xposed module work on your device. You have been warned.
UPSM+ or Ultra Power Saving Mode Plus has one specific function - allows you to easily add more useful or important apps to the Ultra Power Saving Mode feature (UPSM) of your Samsung Galaxy phone or tablet.
UPSM+ has a permission manager that allows you to define how a specific app behaves in UPSM mode. For example, the Music Player can continue playing even when the screen is off if you tick the relevant permission. Please note though that permission management does not work on all devices because of differences in how they were implemented by Samsung.
This app only adds selected apps to the UPSM app list and has nothing to do with how the UPSM feature work. UPSM is meant for battery saving so please enable only your most useful or important apps. Use with caution and with knowledge of its simple function and limitation.
This app is only compatible with Samsung Galaxy devices that already has the Ultra Power Saving Mode feature. If your device does not have ultra power saving mode, then this app won't work for you.
Supported devices include:
Galaxy S6 Edge
Galaxy Note 4
Galaxy Note Edge
Galaxy A series
Galaxy S5 and S5 mini
Galaxy Tab S
Please contact us thru the app for support and refunds.
tag: upsm manager
This App saves your battery by disconnecting an Internet connection while in sleep mode.
"iBattery" got more positive reviews in Japan than "JuiceDefender", because it doesn't just disconnect from the Internet, but also ends all the running Apps.
Furthermore, at a chosen battery level phone can be automatically switched to Flight Mode, making you chances of running out of battery even lower. (This feature is available on Android 4.1 and earlier.)
＊Power-saving experiments were conducted on Galaxy S3.
If you phone's coverage is unstable you'll be able to save even more battery power!
◎Cautions and other info
・"iBattery" disconnects your phone from the Internet while in sleep mode.
・You can turn it ON-OFF in the Notifications.
・Re-connection speed depends on your device.
・On some devices it is impossible to re-establish Internet connection after screen turns on.
・There are no ads.
◎iBattery introductions by media in Japan.
and many others …
PLEASE READ FULL DESCRIPTION BEFORE ASKING OR RATING!
In SOME* smartphones with AMOLED screen (such as Samsung Galaxy S4) black pixel = turned off pixel.(* - SOME means SOME, NOT EVERY. If this app doesn't work on yours, just ignore it, you don't have to rate my work with 1 star...)
I've always been irritated because of the fact that our batteries aren't too great, but phone producers still produce their phones with hiper-resolution, which practically we cannot even see.I have invented something, that later I turned to real app.
I called it Pixel Battery Saver Booster, because it displays some kind of totally black mesh on the screen (you can change its density), so at least half of the pixels (or more) are turned off (so the screen consumes less energy!), while you are still able to read anything on your screen.
If you still don't understand, just take a look at the screenshots.
• What do I need this for?- Imagine this situation - your battery level is really low, but you have to search for something important on the Internet. Making the brightness lower often isn't enough. That's when you would need my app - to turn off some count of pixels.
• There are lots of apps that dim the screen... Is this one different?- This app works different. It doesn't overlay your screen with transparent image (but there is such option in premium version if you need it too). It overlays your screen with totally black mesh, which makes some count of pixels off, to prevent them from consuming battery.
• Do I really need AMOLED screen?- The best results you can get right with AMOLED screen, where black pixel means turned off pixel. However, even in other type screens black pixels are saving some battery, so it's just worth to check.
• In battery stats I can see that this app consumes a lot of energy. Why?- Don't look at the stats, look at the real battery consumption. Probably, Android Battery Stats app "thinks", that this app display an image on the screen all the time, because of what it shows an information about consuming energy. In fact, this app turns OFF the pixels (in AMOLED screens with this function), so it SAVES that energy, not consumes.
Dont take our word for it see what media is saying about us :
• When the mesh is on, I am unable to install apps (Install button is disabled)- That's because of the Android Security. In premium version of Pixel Battery Saver I added an option to bypass this protection. In this free version you can simply turn off the app (by clicking "Turn off" button in Settings window) before installing any app and then turn on it again.
• This would be great if the app would be able to turn on the mesh automatically on specific battery level (f.e. when battery level is low), can you make it?- I've already added this function (and many other) in the next version of the app, which is not published yet, so stay tuned! :)
• Where's the premium version of PBS?- I've already developed the next version with many more cool features, but, unfortunately, for now I can't publish paid apps due to the law in my country. I'm thinking how to make it possible...
• This app doesn't work on my phone! It sucks!- As I said, this app cannot work on every single device. Just report this fact to me via e-mail, you don't have to rate this app with 1 star.
You can find out the current status of your flash counter and firmware state (custom or official) by booting into "download mode" on most devices. The usual way of getting into "download mode" is by first turning off your device, then turning it on by pressing and holding VolDown+(Home)+Power. Alternatively, the "adb reboot download" command also often works.
When you run TriangleAway, if your device and firmware are supported, it will show you the detected state of the binary (custom or official) and flash counter value, and the option to "Reset flash counter". Please confirm that the information shown is correct before resetting the values.
On a number of devices, TriangleAway can work, but your firmware may not be supported directly. In that case, the app will tell you it needs to reboot into a special boot mode, which will be happen if you select "Reset flash counter". The device will reboot into a special mode which will allow you to review the current status and reset the binary and flash counter values (or abort and do nothing). On some devices this will actually trigger the counter to 1 if its 0 - so if you're "just checking", do that in download mode!
!!! THIS IS A DANGEROUS OPERATION AND COULD POTENTIALLY BRICK YOUR DEVICE. PROCEED AT YOUR OWN RISK. A USB JIG IS PREFERRED IF YOU HAVE A WORKING ONE !!!
( and by brick I mean brick - only a board replacement or a JTAG unit will be able to save you, don't mess with boot(loader) stuff unless you *really* mean it! )
Note#1: using Triangle Away may unmount your SD card. Reboot or manually remount it from Android settings.
Note#2: on new devices status can only be reset on stock firmwares!
- GT-I9100 **
- Sprint Epic 4G Touch
- Korea SHW-M250K/L/S
- GT-I9300/I9300T **
- GT-I9305/I9305T/I9305N LTE **
- USA: AT&T, Sprint, T-Mo, VZW (unlock bootloader !), USCC, MetroPCS, Cricket, CSpire
- Korea: SHV-E210K/L/S, SHW-M440S
- USA: AT&T, VZW, Sprint, T-Mo, USCC
SG Note 2:
- GT-N7100/N7100T/N7102/N7105/N7105T **
- USA: AT&T, Sprint, T-Mo, VZW (unlock bootloader !), USCC
- Canada: I317M, T889V
- Korea: SHV-E250K/L/S **
SG Note 3 (4.4+):
- USA: T-Mobile, Sprint
- Canada: SM-N900W8
- Asia: SM-N900S/2/6/8/9
SG Note 8.0":
- GT-N5100 3G **
- GT-N511x Wi-Fi **
- GT-N5120 LTE **
SG Note 10.1":
- GT-N8000 3G **
- GT-N801x Wi-Fi **
- GT-N8020 LTE **
- SHW-M480S/K/W **
SG Camera EK-GC100 **
SG Tab 2:
- GT-P310x 7" 3G
- GT-P311x 7" Wi-Fi
- GT-P510x 10.1" 3G
- GT-P511x 10.1" Wi-Fi
- I8160, I8190
- S7500, S7560, S7562
** Various models are supported depending on firmware, but only the exact models listed are supported regardless of firmware version.
Whether or not Triangle Away works may depend on your kernel, try flashing a different one if it doesn't work.
Please also note that some devices set the counter to 1 at every boot if you are running a custom kernel or recovery. On these devices, Triangle Away may always display 1 - make sure to check the counter in actual download mode.
For discussion and technical details, see the XDA-Developers.com thread here:
Note that this download is also available from that thread completely for free. You can go there and download it for free, or buy me a beer and download it from Play. It is the same program.
I'm not sure about future updates - http://www.chainfire.eu/articles/118/Triangle_Away_vs_Samsung/
Mobile ODIN is the on-device firmware flasher of choice. Just throw those firmware files on your (internal or external) SD card, start Mobile ODIN and flash away.
! Your device must be rooted to be able to use Mobile ODIN. Check the list below to see if your device is supported !
If you use the EverRoot option, Mobile ODIN will root the firmware while you flash it. Checking out that new leaked firmware? No reason to lose root!
Currently supported devices:
- AT&T/Rogers Captivate SGH-I896/I897
- AT&T SGH-I777
- Sprint/Virgin/Boost Epic 4G Touch SPH-D710/VMUB/BST
- USCC SCH-R760
- LTE SHV-E210S
- LTE GT-I9305/T/N
- AT&T/Canadia SGH-I747/M
- TMOUS SGH-T999
- Sprint/C-Spire SPH/SCH-L710
- VZW SCH-I535 (unlock bootloader !)
- USCC/Cricket/MetroPCS Galaxy S3 SCH-R530/U/M/C
- LTE GT-I9505
- Sprint SPH-L720
- TMOUS SGH-M919
- USCC SCH-R970
- Canadia SGH-I337M
- LTE SM-G900F
- Oceania SM-G900I
- Korea SM-G900L
- Americas SM-G900M
- Sprint SM-G900P
- USCC SM-G900R4
- TMOUS SM-G900T
- Metro SM-G900T1
- Canadia SM-G900W8
Google Galaxy Nexus:
- GSM Maguro/Yakju/GT-I9250
- CDMA/LTE Toro/Mysid/SCH-I515 (no cdma radio flashing)
Galaxy Note 2:
- LTE GT-N7105
- AT&T/Canadia SGH-I317/M
- TMOUS SGH-T889
- Sprint SPH-L900
- VZW SCH-I605 (unlock bootloader !)
- USCC SCH-R950
Galaxy Note 3:
- Sprint SM-N900P
- TMOUS SM-N900T
- USCC SM-N900R4
- Canadia SM-N900W8
Galaxy Note 8.0":
- 3G GT-N5100
- Wi-Fi GT-N5110/13
- LTE GT-N5120
Galaxy Note 10.1":
- 3G GT-N8000
- Wi-Fi GT-N8010/13
- LTE GT-N8020
- Tab 7" GT-P1000
- Tab 7.0 Plus GT-P6200/L/10
- Tab 7.7" GT-P6800/10
- Tab 10.1" GT-P750/10
- Tab 2 7" GT-P3100/10/13
- Tab 2 10" GT-P5100/10/13
Flashing with Mobile ODIN does NOT increase your custom kernel flash counter or make the yellow warning triangle appear.
Discussion and support: http://forum.xda-developers.com/showthread.php?t=1347899
Flashing with Mobile ODIN is easy. You start by starting the app and the app will check your system has everything it needs to continue (like root). It may need to download an additional package, so it is advised you have Wi-Fi available.
Now you should see the main Mobile ODIN screen. It will list a set of partitions. Clicking a partition will allow you to select a file from your SD card to flash to that partition. Do not worry about selecting the wrong file - Mobile ODIN will not let you. Separate files (named after the partition) as well as .tar and .tar.md5 files are supported.
From the desktop ODIN you may be used to "PDA", "PHONE", and "CSC" buttons. All three of these buttons have been replaced by the "Open file ..." button. This button will open the file you select from the SD card, and find all the partitions it can flash inside that file. So if you select a .tar file containing kernel and modem, the Kernel and Modem partitions will be set up to use that .tar file for flashing.
Now that we have selected what we want to flash, if you have the Pro version you can proceed to the EverRoot section. The EverRoot options allows you to root your firmware while it is being flashed. Never again will you be without root! Select here which apps you want to inject in the firmware that is being flashed.
Now that we are all done selecting partitions and configuring EverRoot, we continue to "Flash firmware". Mobile ODIN will gather all the information it needs and perform the flash. Before starting, however, it will check that your battery level is over 50%, and if applicable offer to verify MD5 checksums on the files you have selected to flash. If all is well, it will reboot into recovery mode, and flash the firmware you have selected.
Automate SetCPU with profiles! SetCPU allows you to set up powerful profiles to change your settings under certain conditions, such as what app is running, when the phone is asleep or charging, when the battery level drops below a certain point, when the phone's temperature is too high, or during certain times of day. See the screenshots for examples of how you might set up profiles.
SetCPU's wide feature set make it useful to Android beginners and enthusiasts alike. Accelerate your processor to unleash your phone's true multitasking potential, or dial your CPU's speed down to save battery.
SetCPU also includes a "voltage control" menu, available to certain devices with custom kernels that support it, to control undervolting to save even more battery. Undervolting is only available for certain kernels.
Hey guys! It's good to be back ;) I have been very busy with school for the past year. 3.1.0 is mostly a bug fix release for some standing issues, but expect much more frequent updates from now on.
- Added SUPERUSER permission.
- Fixed a bug where action bar menu items would sometimes not appear for the profiles menu.
- Fixed a bug where voltage items would appear in reverse with some custom kernels.
- Added an open source licenses menu item in About.
Mike "coolbho3k" Huang
Root: SetCPU needs root permissions to modify the CPU speed and other settings.
Read logs: is used for efficient app condition checking. That is currently all it's used for.
Start at boot: SetCPU will start a profiles service at boot, if enabled. It also sets default boot settings, if enabled. SetCPU does not run in the background if profiles are not enabled, and becomes inactive after settings, if any, are applied.
Wake lock: This prevents the phone from sleeping while stress testing and benchmarking.
Write external storage: SetCPU needs to read from and write to the SD card or internal storage to back up profiles.
Read phone state: The "in call" condition needs this to determine if the user is making a phone call or not, and trigger the profile if the user wants to.
Share only selected files, music, folders or virtual usb , LUKS encrypted or unencrypted, disks via usb with PC/Radio car/Player ...
Also mount virtual Un/encrypted images in your device.
Usb Sharer uses UMS (Usb Mass Storage) protocol, skipping MTP/PTP.
Test Usb Sharer eval version before install it.
* Share only selected folders/directories.
* Share only desired files, preventing visibility of undesired files on your SD card.
* Share system files/directories.
To do that, select desired files/folders with your favorite application and use "Usb Sharer" to this job.
* Create virtual USB encrypted or unencrypted disks and share only files inside it, rejecting access to other files in your sdcard.
Also you will encrypt all files and data if your disk is selected as encrypted. By default encryption is AES, and uses LUKS standard.
It is possible share virtual disk as RO (read only) mode (if your device implements such function).
* Save your favorite Ubuntu, Backtrack, or preferred rescue image and boot your PC from it. Instead having one different USB flash drive for each distribution.
To do this, upload image to your device and select to share with Usb Sharer. Or save it in /sdcard/usbSharer/imgs/ directory.
* Mount disk images on your android device. Majority of kernels supports vfat/fat and ext2/ext3/ext4. But if you have custom kernel also could mount other file-systems like iso9660
In order to test if Usb Sharer works in your device you should follow next steps.
1 - Install Usb Sharer.
2 - Select some files with your favorite application, for example 4 or 5 photos from gallery, and use Usb Sharer to this job.
3 - With Usb cable connected to your PC, press share button, and check if your PC recognises the USB and only selected files are on it.
4 - Unshare this virtual image or disconnect usb cable.
5 - Open Usb Sharer application from applications menu.
6 - Create new virtual usb with desired size and share it.
7 - Check the new image is correctly recognized from your PC.
If does not work for your device please report mail opening Usb Sharer from applications menu and press menu to send mail with full info.
Please consider send mail to devwom at gmail dot com before negative rates. Keep in mind that there are a lot of devices with different configurations.
No Root Screenshot It is an application that lets you take screenshots of your phone. This application works on ALL phones. Root is NOT required.
Take screenshots of any screen on your phone!
This application is for those users who need to take screenshots, but don't have root access to their phones.
PLEASE READ CAREFULLY BEFORE INSTALLING:
This application will instruct you to download and install a free desktop application on your Windows or Mac. Once installed, you must run the desktop application with your phone attached to your computer. This will enable screenshots on your phone.
Once you've done this, you can disconnect your phone and take screenshots whenever you want. However, every time you restart your phone, you'll have to connect it to your computer and run the desktop application again. If you restart your phone frequently, this app may not be for you, as it may prove to be too inconvenient.
Your phone will NOT be rooted or temp-rooted in any way. No system files on your phone will be altered.
If your phone is already rooted, please download the normal "Screenshot It" application from the Android market.
- Take a screenshot of your phone's screen
- Save as a jpg or png file and share anywhere
- Crop screenshots
- Annotate and draw on screenshots
- Screen shot status bar button
- Screenshot widget button
- Shake to screen shot
- Delayed screenshot timer
- "Share" menu integration
- Custom save directory
- Overlay phone information on screenshots
- Works on ALL devices
Please exclude this app from any task killer or anti-virus software on your phone. If you don't, you'll have to run the enabler more often.
Tags: Screenshot, screen shot, screen capture, no root
MONEY BACK GUARANTEE
ROOT IS REQUIRED
Root Cleaner is simple and effective application which a lot increases your peformance by cleaning your system. You can choose between quick cleaning and full cleaning. Quick cleaning cleans your memory, file cache, etc. and you can do that without reboot. Full cleaning requires reboot, but it makes really total maintenance of your system. Full cleaning is also great when you want to flash other ROM or kernel, so it will clean your device to prevent any problem. Application also contains feature for uninstalling, clearing data and freezing or unfreezing your system and non-system applications.
-Restart system UI
-Clean drop caches
-Clean empty folders
-Clean dormant folders
-Clean useless folders
-Clean useless files
-Clean dalvik cache
-Clean init.d folder
-Clean empty folders
-Clean dormant folders
-Clean useless folders
-Clean useless files
-Clear app data
-Quick cleaning interval
-Exception list for files and folders
-English, Czech, Slovak, Russian, Italian
IF YOU FIND A BUG OR IF YOU HAVE SOME PROBLEM, CONTACT ME BY EMAIL PLEASE
This app require root! Make sure you device is rooted first! Some devices require busybox also.
Special thanks to drifty for the nifty logo!
All original credit for discovering the importance of efs and backups goes to autoprime!
Optimus G Pro and LG G2 support is due to drjbliss and loki
Freegee is all new and rewritten from scratch. Everything is done on device now so there is no more white listing every variant, only just enabling models.
If you run into an error please report it, send me a logcat. I can be reached via email or on xda/irc.
Dropbox support is under menu -> settings.
This is the donation version. It is exactly the same as the free version.
This is the next step in Project FreeGee. Have an LG Optimus G, LG Optimus G Pro or LG G2? If so this app will allow you to unlock (Optimus G only) or bypass your bootloader, remove LG Security and install cwm or twrp recovery. With removed lg security you can now uninstall any preloaded applications you want.
Please contact Shelnutt2 on freenode irc #lg-optimus-g with any problem.
The old 1.2.4 version, which is now depreciated can be downloaded here:
The source is available here:
All the gamma interfaces are subjective to the Kernel installed if it supports them. Without a custom Kernel these functionalities will NOT work. The only part of the app that does not require any modification besides root is the Nexus 4 RGB multipliers (stock Kernel offers it by default). It does not work with any other device besides the ones mentioned above.
ONLY SUPPORTS THESE DEVICES:
* Galaxy Nexus
* Nexus 4
* Nexus 5
Every eye is different, every person has its color taste. Therefore here's the fresh new Nexus Display Control application that lets you tune your display to achieve the best result for the best user experience. You'll be able to change the Red, Green and Blue values that are used together to calibrate your screen.
The changes are automatically set on boot so you won't need to re-set them every time you reboot or shutdown your device.
If you hit a bug or something you don't like, please, before leaving 1 star ratings email me: email@example.com. I can't reply to Market reviews/comments so emailing me will be the best option.
Permissions: INTERNET and ACCESS_NETWORK_STATE are for licensing purposes.
Icon and banner courtesy of http://www.johnxde.com/ # https://play.google.com/store/apps/developer?id=giannisgx89
I take no responsibility for any fault or damage caused by any procedures within this guide. No warranties of any kind are given.
Save precious application storage! Force2SD lets you force many apps to move to SD card/external storage even when the system would not allow you to move them, thereby saving space in the app storage area. While Android as of version 2.2 introduced the feature that lets you move apps to SD card/external storage, it normally only allows the movement of applications explicitly marked by the developer as movable. Force2SD moves many applications not marked as movable.
You can also move applications back, and sort alphabetically or by apk size.
By default (you can turn this off) Force2SD will also scan for orphan app files on your SD card when starting. Sometimes, the system fails to delete the app file on the SD card when the app is uninstalled. If any orphan files are found, you will be asked if you want to delete them. This may help with some reboot issues.
Note 1: Applications moved to SD card / external storage will not get an on-boot signal when the device is booted up. So, do not move applications that need to perform some operations on boot. Of course, you should always be able to move these applications back if you're having problems.
As a bonus, if you don't want an application starting up on boot, you can use Force2SD to move it.
Note 2: After a reboot, it make take a while (even a couple of minutes) for the OS to show up the icons of apps that have been moved. That is normal--that's how the OS's apps-on-SD feature works.
Note 3: Some protected apps cannot move.
Note 4: The first time you start the app, it will do a slower scan of applications.
Ever wanted to unlock your linux based phones full potential?
Of course you do. Take a look below at the full list of feature that Root Toolbox can offer you!
And now for a limited time only Root Toolbox Pro is half price!
- Enable battery percentage (4.4+)
- Fix market links
- Fix permissions
- Install app from sdcard
- Hotboot/Reboot/Reboot recovery/Reboot bootloader/Reboot download mode/Poweroff
- Wipe rubbish data
- Wipe battery stats
- Wipe internet cache
- Wipe cache partition/Delvik cache
- Wipe download history
- Smart remount menu
- Daul mount external SDcard
- Rescan storage for new file
- Change sim settings and unlock the market
- Recovery & Boot image option(Flash, backup, restore, erase)
- Clockwork mod MD5 sum fixer
- Password protect from childern
GLTools is a custom OpenGLES driver (proxy), that is compatible with any known OpenGLES 2.0-compatible GPU + ARM or x86 processor. If you still don't understand, what this app is, the closest known analog is Chainfire3D.
- Change resolution and rendering bitness in any app, even if it doesn't support that by default.
- Change GPU name and enjoy enhanced graphics even on a noname low-end GPU.
- Take full control over textures: now you can decompress/recompress them (even if your GPU doesn't support that texture format) and resize. Note that decompression feature is available only if you'll install a plugin (internet is required to do that)
- Optimize shaders on-the-fly for optimal performance (the same optimizer is used in Unity3D engine by default)
- Enable MSAA or CSAA in any app to improve graphics quality (make sure that your GPU supports that)
- Measure gained performance with a nice onscreen FPS counter (or you can output FPS information to Logcat if you are a pro)
GLTools is 100% safe if you have a custom recovery installed (and you didn't disable backup in GLTools install dialog), if you'll find it non-working, you can just flash uninstall_gltools.zip in recovery and email me with details (or request a refund).
- HTC One X
- Nexus 7 2013
- LG G2
- Some Samsung devices (random). The lowest success rate is with SGN3 and SGS4 (thx to Knox). Installing a custom kernel can help, this problem is firmware-related. The same for Lenovo devices.
By using this app, you agree to all the following terms:
User is responsible to make sure that any plugins he uses are legal to use. All texture plugins (except for Default) are written by independent developers and are placed on a 3rd-party webserver (except for Default which is builtin), which has nothing to do with me, a GLTools author, except for that I provide a simple in-app browser to install them (as all we know, browser creators have nothing to do with any abusive Internet content, the same thing here).
User is responsible to make sure that this app won't cause any EULA violation. GLTools is designed for debugging of apps that user is author of, any other usage is not officially supported. Anyway, this app changes system libraries only and doesn't cause any binary modification of 3rd-party apps.
All trademark usage is nominative, nominative usage is Fair Use, it doesn't require any permission from trademark holder. Any trademarks are the property of their owners anyway.
If you think that GLTools itself is illegal, you can always contact me via firstname.lastname@example.org
Source code of used GNU Binutils (assembler, linker, etc) and Busybox can be obtained by writing to email@example.com
NOTE I: This app requires a ROOTED device. If you don't know what rooted is, then more likely your device is not rooted so please don't install if you are not sure if you have a rooted device.
NOTE II: This app only adds apps you select into the multiwindow app list and has nothing to do with how multiwindow function works. It seems that in EDIT mode, that is when you are adding apps from the edit list to the traybar, the wrong app is being added. This is because Samsung did not make the multiwindow edit list to support more than 32 apps at the same time. This is a shortcoming in the part of the samsung multiwindow code and has nothing to do with this app.
NOTE III: Just because you can add more apps in the Multiwindow traybar does not mean you have to add all your apps. Based on experience, not all apps are multiwindow-friendly and adding too many apps causes the multiwindow traybar to lag or slow down so BE WARNED.
Galaxy S5 and variants
Galaxy Note 3 and variants
Galaxy S4 and variants
Galaxy Grand Duos
Galaxy Tab Pro 8.4, 10.1, 12.2
Galaxy Note 12.2
Galaxy Note 10.1
Galaxy Note 10.1 (2014)
Galaxy Note 8
Galaxy Tab 8
Galaxy Note 2 (with JB 4.3 only)
Galaxy Note 1 (only those using X-ROM, N8XT & N1XT ROMs)
Samsung Galaxy Note 4
Samsung Galaxy Note Edge
Samsung Galaxy Alpha
Samsung Galaxy Note 3
Samsung Galaxy Note 2
Samsung Galaxy Note 10.1
Samsung Galaxy Note 12.2
Samsung Galaxy Tab Pro
Samsung Galaxy S5
Samsung Galaxy S4
This app is only compatible with Samsung Touchwiz devices with multi window and/or pen window features
MW-Pen App Enabler PRO Key is just a key to unlock the features of the free MW-Pen App Enabler app. This app is not a standalone app. It must be installed together with the main app - MW-Pen App Enabler.
Before buying and using this pro unlock key app, be sure to test the free app first and make sure it works on your device because if the free app does not work on your device, then there is no way the pro key app will ever make it work on your device.
Please be aware that not all apps are multi-window or pen window friendly. Please also note that not all apps can be run multiple times as it depends on how the app was designed.
This app does not require root.
Samsung Galaxy Note 4
Samsung Galaxy Note Edge
Samsung Galaxy Alpha
Samsung Galaxy Note 3
Samsung Galaxy Note 10.1
Samsung Galaxy Note 12.2
Samsung Galaxy Tab Pro
Samsung Galaxy S5
Samsung Galaxy S4
This app is only compatible with Samsung Touchwiz devices with multiwindow and/or pen window features.
MW-Pen App Enabler is an app that enables apps for multiwindow and/or pen window without needing a rooted device.
Before you install and use the app, PLEASE read on as it is important that you understand what it does and its limitations.
What this app does is insert the meta-data that is needed for the android system to recognize a multi window or pen window app as per Samsung's SDK requirement which is covered in the following forum tutorial - http://forum.xda-developers.com/showthread.php?t=2499720.
It can not enable apps that are built into the device/rom which are normally referred to as system apps or apps that are located in /system folder. To do so requires a rooted device which this app is not designed for. This app does not control how multi window or pen window work and so does not guarantee that all enabled apps will work perfectly on multi window or pen window. Enabled apps can not be updated. To update, you need to uninstall the enabled app first, install the updated app and run it through the enabler app again. The bigger the app is, the longer it takes to process.
To use this app, you either pick an apk file from the sdcard if you have a backup of the app or pick from installed apps (system apps not possible), tick the options you prefer, then click process. When processing is done, the app will ask you to uninstall the target app (if it is currently installed) and then install the processed app.
The free app enables adding pen window apps. The PRO KEY enables adding multiwindow apps as well as enabling multi-instance which means running the same multiwindow/pen window app multiple times.
Please don't post problems as reviews as I won't be able to help you that way. Just shoot me a message/email and I'll try my best to resolve issues with the app.