Full Feature List at http://soundabout.userboard.net/t561-feature-list
(Some outputs are enabled for the PRO VERSION only)
Route the media audio to (Built-In speaker, Wired Headphones, Wired Headset (with mic), Earpiece, Aux Digital(HDMI), Bluetooth(A2DP), Bluetooth(mono), Bluetooth(mono)(dynamic), Dock(Analog), Dock(Digital)).
Route the phone call audio to (Built in Earpiece, External speaker, Bluetooth (mono), Wired Headphones, Wired Headset (with mic), Dock (Analog), Dock (Digital)
Phone call audio to Bluetoth A2DP(media) NOT allowed in Android.
Announce Callers Names (Caller ID) when they call (needs contact list)
Turn Notifications and Ringtones on and off depending on the audio output being used.
Send Text-To-Speech audio to various outputs with/without delays:
Wired Headset detection - ALLOW or IGNORE the headphone/headset plug in/out detection.
Wired Headset microphone - DETECT or IGNORE that a headset has a microphone when plugged in.
Send audio to Bluetooth headsets and your car's Bluetooth connection.
- sound indication when routing is switched on
- restores sound volume after switching off the routing
- indication when routing is on in status bar
- restores bluetooth routing after phone call
This is version with advertising - if this application works well for you and you would like to support the development new versions of this application consider downloading Mono Bluetooth Router Pro. Thank you!
Supports Android 2.2 and higher.
Make sure your bluetooth headset is switched on before start the application.
On android 4.0 please make sure you switch on routing before sound started to play.
- Sound quality is not perfect. Unfortunately I still not found a way to deliver high quality of sound, though I am constantly looking for way to make it better. Still hope that low quality is better then no Bluetooth sound at all.
- Not all models supported;
- On some issues of Samsung Galaxy S2 - the native music player is not working - please use third party MP3 music player;
- On some issues of Samsung Galaxy S3 - the sound from microphone also routing through the headset so you hear all noises around that makes program useless;
- Sometimes the program is being killed by Android so music goes trough loudspeakers on full volume;
I still looking for ways to fix these issue, sorry for inconvenience, hoping to find workarounds for these issues.
I welcome any feedbacks from you. Both positive or negative feedbacks are helping me make this application better! Thank you so much!
To manage it you need to:
1. Run Blue Headset Voice which will instantly turn on Bluetooth in your device
2. Turn on your Bluetooth Headset (if it is not paired yet, Android will ask you to pair it)
3. Tap on the name of device you want to connect with.
4. Tap on "Turn on" , to start the audio stream service
5. Press "Music" button to open the default music player.
When someone will call you while you are listening audio with Blue Headset Voice the stream will be paused
for the duration of the call and resumed after it.
*We are very sorry that we are not able to stream high quality audio, but it depends on Android and Bluetooth Headset specification.
Headset Button Controller is very configurable, allowing you to play music, change tracks, adjust volume, answer phone calls, start Voice Command and many other things, just by clicking the button on your headset.
Headset Button Controller is shipped with a powerful default configuration, but you can change almost every action performed. Once you have configured it with your preferences, it runs in the background using almost no CPU. It has been tested with a wide variety of different Android devices and music apps and works with both single-button headsets, and Android-specific 3-button headsets.
Default configuration for single-button headsets (center button for 3-button headsets):
* Single press: play / pause (+ answer call / end call)
* Double press: next track (+ decline call / mute microphone)
* Triple press: previous track
* Quadruple press: previous track (2x)
* Long press: Volume control 
* Press and hold: Fast forward 
* Double press and hold: Rewind 
* Triple press and hold: disabled
All of the above options are configurable to any of the following:
* Play / pause
* Next track
* Previous track
* Previous track (2x)
* Mute / unmute
* Voice command
* Voice search
* Redial last number
* Say current time (Text-To-Speech required)
* Launch app
* Launch shortcut
* Tasker task 
* Switch profile
Additionally the long press options are configurable to any of the following:
* Volume control 
* Rewind 
* Fast forward 
 Requires the app 'Tasker'
 While the button is held down, the volume is initially reset to the minimum limit (see below) and then raised until the button is released
 Not every music player app supports rewind / fast forward
With a 3-button headset, volume control is also configurable with the left and right headset buttons.
Music app selection
Headset Button Controller controls the currently running music app. You are also able to explicitly specify which installed music app you want to control.
Volume control features
Headset Button Controller remembers the music volume when the headphone is unplugged and can restore it when the headphone is plugged in again.
* Min volume limit: Start volume level of the 'volume control' command
* Max volume limit: Ensures that the headset music volume never exceeds this limit
You are also able to control calls with the headset button:
* answer call / end call on single press (configurable)
* decline call / mute microphone on double press (configurable)
* adjust volume during a call (see volume control)
* announce caller name (Text-To-Speech required)
You can also configure Headset Button Controller to automatically answer an incoming call after a configurable delay.
Headset plug in / out
You can configure an action to be performed when the headset gets plugged in / out.
You can create different 'configuration profiles' which you can switch between. Add a widget or a shortcut to your home screen to easily change your profile. It is also possible to switch profile from the 'Tasker' or 'Locale' app (Locale plug-in). All settings can be backed up on SD card.
This is the full version of Headset Button Controller. To check if this app works with your phone / music player correctly, we suggest you first install the trial version of this app before buying.
This version is for Android 4.2 and up. It may not be supported on all devices! I don't have all devices to test so you will just need to try it. Several have left bad ratings. If you have the same device as one of the bad ratings claiming it does not work than it probably won't work.
Note: This is only a widget, not an app. You must place an instance of the widget on your home screen. See your devices help for instructions on placing widgets on your home screen. All it does is toggle the connection to A2DP profile only. Nothing else.
See manual, release notes, details here: http://code.google.com/p/a2dp-connect2/
Please submit enhancement request and defect reports here: http://code.google.com/p/a2dp-connect2/issues/list
Configurable click combinations
* Single/double/triple/quadruple click
* Single/double/triple click and hold
* These options work for the play/pause, next and previous button.
* Play/pause, next, previous or stop track
* Volume up, down or reset and rise
* Launch app (e.g. Voice Actions)
* Fast forward or rewind (long press or toggle)
* Tasker task (search 'Tasker' in the Google Play Store)
* Say time (requires Text-to-Speech)
* Target a specific media player to control.
* Separate volume levels will remember the media volume when (un)plugging your headset and restore it when (un)plugging your headset later.
* Ear protection allows you to limit the volume level.
* Volume reset and rise will start where you set it to start and rises based on the long-press delay.
* Option to speak the name or number of the person calling. (Requires Text-to-Speech.)
* Single click on the play/pause button answers/ends calls.
* Double click on the play/pause button declines incoming calls and (un)mutes the mic during calls.
* Triple click repeats the caller name or number. (Requires Text-to-Speech.)
* The buttons of the 5 above options are customisable.
* Monitor headset activity with timestamps.
* A widget to quickly switch the targeted media player.
* Export your settings to your SD card to switch between profiles or to back-up your settings. This function can be found by pressing menu.
* Execute actions when plugging your headset in or out.
* Turn on 'Headset (with mic) only' or 'Ignore system clicks' to selectively execute button actions.
* The play/pause button's long press functionality does not currently work with Jelly Bean due to Google forcing Voice Search to be launched.
* Works with almost all devices/wired headsets.
* Volume buttons on iPod/iPhone headsets will NOT work. This is due to hardware issues.
* Bluetooth headsets might not work.
* Fast forward and rewind require the media player to support it.
* TTS functionality requires Text-to-Speech to be installed on your phone.
* If Headset Droid seems to not be responding, press menu and select 'Check for conflicts'.
* If no conflicts are found, use the Headset monitor to see how Headset Droid is receiving and handling button interaction.
* For further assistance, please don't hesitate to contact me.
* Apps used to control headset clicks will conflict with ICS's lockscreen music widget due to Android's architecture.
* Please use the trial version to check if Headset Droid works without issues with your phone/headset/player. Uninstall the trial before installing the full version.
If you have any other suggestions, questions or issues, feel free to contact me and I'll do my best to respond asap. Please don't use reviews for complaints as I will be unable to respond to your issue.
This version is for Android 4.1 and prior. There is another version for Android 4.2 and up.
Some devices may require a reboot after install for the widget to appear in the widget drawer (Android 4 and up).
Note: This is only a widget, not an app. You must place an instance of the widget on your home screen. See your devices help for instructions on placing widgets on your home screen. Here are instructions: http://google.about.com/od/socialtoolsfromgoogle/ss/how-to-add-android-widgets.htm
So far all the 1 star comments are from people who do not know how to use widgets.
See manual, release notes, details here: http://code.google.com/p/a2dp-connect/
Please submit enhancement request and defect reports here: http://code.google.com/p/a2dp-connect/issues/list
I have no interest in advertising or monetizing this widget. Please don't contact me with offers to do so.
JAYS Headset Control brings a wide range of new features to your JAYS Android remote earphones. Change track, adjust volume, target specific media players, launch apps and much more. JAYS Headset Control comes with three modes; Off, Easy Mode and Advanced Mode, all simply controlled by the unique navigation wheel, optimized for JAYS products; a-JAYS Five for Android and a-JAYS One+.
- Just install and you're good to go!
- Customize the remote buttons, click delays, settings, target specific media players and more.
- Next Track/Previous Track
- Volume Up/Down
- Launch App
- Answer/End Call
- Decline/Mute Call
- Audio Feedback
- Volume Settings
- Functionality Settings
- Set the Multiple Click Delay time value.
- Set the Click & Hold time value.
- Available in English, French, Korean and Chinese (traditional).
- Email support available in English.
- Click-and-hold* actions will not work in Android 4.1+ as Android now intercepts them.
- Optimized against JAYS a-JAYS Five for Android and a-JAYS One+ remote earphones.
- Works with most Android devices on the market.
- Not compatible with three-button Apple headsets like a-JAYS Four iPhone.
- Functionality may vary between different cellphones.
- Some cell phones intercepts upper/lower buttons with the OS default button actions making them not customizable.
* Volume control on 1-button headsets.
- If JAYS Headset Control seems to not be responding, press menu and select 'Check for conflicts'.
- Some stock music players will not work properly with JAYS Headset Control, but most third party players will.
- Apps used to control headset clicks will conflict with ICS's lockscreen music widget due to Android's architecture.
- Spotify often needs you to go to Advanced settings and chose Spotify under Target media player.
Check out JAYS website for further information and support at http://www.jays.se.
This app enables cars with Bluetooth but without A2DP to play media over your cars speakers.
It works for version Android 4.0 and above.
This application converts your stereo, digital Bluetooth signal to a mono signal.
This allows your car to play any phone audio through the car speakers.
This does have a negative affect on sound quality that is unavoidable.
Any sound quality loss is due to the conversion to mono and your car's stereo quality.
Tags: sound over Bluetooth phone receiver, vehicle phone audio-system, sound phone translate, phone pair, A2DP, BMW Bluetooth
Minimal OS Android 4.0
Attention: e-Books Readers (they hav no any Bluetooth) Blue CarAudio M doesn't support!
Please, look at the documentation of your car's Bluetooth receiver. Some systems end the connection after a set amount of time
- you have no any adMod and no any limits, like to amount of start your perfer media application.
- Blue CarAudio M Pro checks state of BT-connection better and more.
Before you start streaming to your Bluetooth receiver, please configure your Bluetooth connection and make some test call via your smartphone through your car's Bluetooth. The application doesn't setup any Bluetooth pairing, it only streams over existing Bluetooth connections!!! The Android OS connects with last active Bluetooth receiver (if possible).
After enabling this appliction, if your smartphone plays music, voice etc. on the phone's internal speaker: Android OS had not found any Bluetooth receivers or has not established a connection to them.
The Philips Headset app runs in the background with almost no CPU loading and preset with pre-defined button controls already. Users can also customize the button with the following selections:
To select a suitable sound profile it’s effortlessly simple. Under ‘Headset’ sound will auto adjust to fit with your selected Philips headset model. If one prefers to customize their sound profile, choose the manual option under ‘Sound’ to tune and personalize your sound preference for an individual sound experience.
Why MySound doesn’t work properly with my phones?
- The app doesn't work with the default player of some Samsung phones. We suggest you try to use music player like Mixzing, PowerAMP, Winamp, DoubleTwist, Songbird etc.
- If the app still doesn’t work with your phone even you used the suggested music player, it is probably due to the music player setting. Please go to setting and activate the in-control option.
- If the app still doesn’t work with your phone even you used the suggested music player, it is probably due to the music player setting. Please set up the song playlist and use it with my MySound.
Phones that don't work with the app:
- The app doesn't work with HTC Beats as it has its own Beats sound system and overrides external equalizer control.
- The app doesn't work with phones from Sony Ericsson and older Samsung phones with Android platform and it is due to different 3,5mm pin configuration they are using. This requires extra connector to be compatible with. Please go to our customer support for help if needed.
If the Android headset app is topped by the system’s setting menu or a powerful app killer, you will only need to re launch the app again. Just plugging the headset will not initiate the app as it is the first time.
1) In Android 4.1 Jelly Bean, the long press command are reserved by the Google Now (personal assistant). It causes the Headset app could not react to the long press assigned operation.
2) Nexus 7 has disabled the headset control pin in its 3.5 mm audio connector which causes the Headset app fail to function.
This app is an ad-free paid version.
This application is a friend of ear buds, a headset,
Recognized automatically when you connect the headset earphones headset, earphone.
And related to ear buds, a headset, a program run faster by running this application.
This application is a music player, video player, such as dialing earphones to run the application.
This application is basically, music, video, dialer, youtube is set by default.
This application is Controller other Apps,
This application is "frequently used apps" can be used.
Note: free trial here: http://www.audio-evolution.com/downloads/USBAudioPlayerPROTrial_2.1.0.apk Rename the file to .apk if the file got renamed to .man after download!
Android 5 users: although Android 5 has some support for USB DACs, it is limited to 16-bit and sample rates of 44100/48000Hz. For high quality playback, you still need this app to enjoy 24-bit music at any sample rate your DAC supports.
• Plays wav/flac/ogg/mp3/DSD/aiff/aac/m4a/ape/cue/etc. files (even 24-bit or 32-bit). Almost every format that is listed here should work: http://en.wikipedia.org/wiki/Libavcodec
• Uses a USB audio DAC connected by a OTG cable (if your Android device supports USB host and is compatible)
• Plays natively up to 32-bit/384kHz or any other rate/resolution your DAC supports by completely bypassing the Android audio system. No other Android player can do this since they are limited to 16-bit and usually 48kHz.
• DSD-over-PCM support (.dff/.dsf files) and DSD-to-PCM conversion if the DAC does not support DSD
• Folder playback
• Network playback using Samba shares (should work with Windows and NAS)
• Android media database playback with playlists. Play albums or create your own play lists from a list of songs (not applicable to folder playback!)
• Gapless playback
• Sample rate conversion (if your DAC doesn't support the audio file's sample rate, it will be converted to a higher sample rate if available or the highest if not available)
• 10-band equalizer (can be turned off)
• No root or custom kernels required
• Software and hardware volume control (when applicable)
• Shuffle / repeat
Warning: this is not a generic driver, you can only playback from within this app. It is not possible to use your USB audio device using this software with other apps!
Please have a look here for a list of tested devices and more information on how to connect a USB audio device:
If you are more interested in recording, please see our recording app USB Audio Recorder PRO:
Make sure to connect your audio device BEFORE starting USB Audio Player PRO. If you get a message on start-up saying that the device failed to initialize, it is likely an incompatible Android device or a wrong cable since DACs are usually class compliant. If your Android device does not supply enough power, please try a powered USB hub.
Please let us know if your Android/audio device combination works. These DACs were tested in the past with USB Audio Recorder PRO, so will likely to function with USB Audio Player PRO as well:
• Alo Audio The International
• Audiolab M-Dac
• Audioquest Dragonfly
• Benchmark DAC 1 HDR
• Cambridge Audio DacMagic 100
• Centrance Dacport LX / HiFi M8
• Cypherlabs AlgoRhythm Solo
• DacPort LX
• FiiO E7/E10/E17/E18
• Go Vibe DAC
• HiFimeDIY Sabre U2
• HRT Microstreamer
• Ibasso D-Zero / D55 / D6 / D7
• iFi nano iDSD / micro iDAC
• M2TECH hiFace TWO / DAC / Joplin
• Meridian Explorer
• Musical Fidelity V-DAC II
• NAD PP 3i
• NuForce uDAC / Icon HDP
• NwAvguy ODAC
• Intruder DAC
• Stoner Acoustics UD100
• and many more!
Please contact us by email at email@example.com to report any issues so we can solve them quickly!
This App makes your Android device a wireless speaker.
How it works:
Download Windows or Linux executables on your machine depending on the OS
Run WiFi Audio Android App and Press start, you will see IP address of mobile device in the bottom
after that run Windows/Linux application and put mobile device's IP address in the IP address field and then press start on PC application. Now all audio coming out from PC will be send to mobile device and you will hear audio on mobile device.
Links to download PC's Application:
Windows XP with Wave Mix/Stereo MIx
Windows Vista or above
Linux PC with Pulse Audio
You'll be able to send audio from any audio app, like iTunes, Rdio, or Spotify, as well as web-based sources like Pandora and more. Hear your audio anywhere around the house!
Just connect your device to your local Wifi network, then open up Airfoil on your Mac or Windows machine, and start transmitting to your Android phone, player, or tablet.
Get Airfoil right from our site:
Airfoil Speakers for Android: Another fine Rogue Amoeba product
It's is a simple sound generator that generates simple sine wave (20Hz-20kHz) or noise (white, pink and brown) that enables you to test the quality of the speakers (given that you know how a sine/noise should sound). Just connect your phone's headphone output with the amplifier input and press the play button.
The generator makes mono sound with support for various sample rates (8000-44100Hz) and sound buffer sizes.
NOTE: If you hear dropouts, that might mean that either your CPU is too slow (choose smaller sample rate) or you're out of memory (increase the buffer size). If you hear dropouts even on the most conservative settings (8000Hz sample rate, +100% buffer size), please let me know.
[LOCALE] English, Italian
SOON TO COME: log scale, stereo sound, phase testing support, other generators, UI redesign.
The app shows all detected USB devices which were present when the app was started. Each of them can be selected, and if the detection of a sound card was successful, the supported modes for audio capturing and playback are displayed, as well as (part of) the controls of this sound card.
When a certain setting for capture (or playback) is selected, the buttons for streaming audio become active. To enable the "Ext mic to ext speaker" button, however, record and playback settings must match.
"Ext mic to int speaker" captures audio from the USB sound card and plays it via Android's sound system (typically built-in speakers).
"Int mic to ext speaker" captures audio from Androids default microphone and sends it to the USB sound cards output.
"Ext mic to ext speaker" operates solely on the USB sound card, sending all captured audio right back to its output.
While one of these 3 modes is active, only the record/playback/other controls are effective. For changing sample rates, the current operation has to be stopped.
If you find a sound card that is not properly detected, please press the feedback button. The data from the USB device(s) ("descriptors") is captured in an email to help debugging the issue. If applicable, add a short description of what went wrong.
If the sound card is detected but the streaming modes do not work, try lowering the USB load by decreasing the number of ISO packets, USB buffers, or both.