This is an android AIM Module (to be used in the Dodedodo framework, see www.dodedodo.com) which provides the duplication of messages. Any message coming in on its input port is duplicated and sent out on all its output ports. It can be used in combination with other AIM modules.
It provides 1 input port and 2 output ports.
Point your device towards a lighthouse, beacon, buoy or any other navigational aid to get its name, characteristics, distance and bearing.
In simulation mode you can relocate and search the seamarks and lighthouse directory for the seashores of many european countries and USA.
The app does not require a network connection to display the semarks and coast line. The maps and weather data however require a mobile network connection. Marks data are derived from the OpenSeaMap project.
Please note that only a GPS location coupled with a device with a gyroscope can achieve a high accuracy for seamark positionning. The accuracy with a mobile network location or with a device without a gyroscope is insufficient to provide an accurate augmented reality view. In manual mode the app is an accurate hand-bearing compass.
If the app doesn't work correctly on your device, please send an email describing the problem with details on the device type and its manufacturer, along with Android version.
- Available countries/zones (followed by the number of seamarks)
South Africa (268)
South Korea (44)
Faroe islands (47)
France mainland and Corsica (2304)
Georgia (Europe) (41)
United Kingdom - England, Wales, Scotland (2760)
Ireland and Northern Ireland (693)
Isle of Man (42)
Norway (no coastline available) (3935)
Portugal and Azores (432)
Spain and Balearic Islands (1299)
New Caledonia (16)
New Zealand (206)
Unitest States of America:
Bearings are recorded using the camera of your device. Corresponding pictures are stored on your SD card, with or without the bearing information depending of your preference.
Translated in english, german and french.
Don't forget to calibrate your device before use by waving it to figure-8 patterns.
This is the ad free version of the Anchor Watch (free) app
+ Text Message alarm notification to another phone, useful when ashore
+ Background task support, alarm is still active when you use other apps
+ Drop anchor and adjust alarm easily via drag & drop
+ Set advanced drift radius, very useful when there are many boats on the anchorage or you anchoring between mooring boys
+ Fully offline, doesn't need a internet connection
+ Display of the OpenSeaMap data http://www.openseamap.org/ (Copyright: http://www.openstreetmap.org/copyright/), this is completely optional and also possible without internet connection. For usage of the map in offline mode, please see: http://www.haakseth.com/?p=30.
+ Configurable measure units: Metric, nautical miles, feet
+ Possibility to rotate map according to the device compass
+ Fine GPS location: To monitor your location
+ Send SMS: To send alarm notifications via Text Messages
+ Read contacts: Only used to lookup phone numbers for Text Message notification
+ Wake lock: To wake up phone during alarm
+ Vibrate: For the alarm
+ Full internet access: For displaying the OpenSeaMap data
+ Network state: For displaying the OpenSeaMap data
+ Read and write external storage: For offline map availability and map data caching
In case you have any problems do not hesitate to contact me
The test is useful for all types of maritime educations, both merchant and leisure.
Navigame Buoys is complied with IALA (Maritime Buoyage System) therefore you must choose if you want to do the test in according to region A or region B. You can change region after each level.
The test is built on the most efficient learning method. Buoys are divided into four levels with increasing in difficulty as you progress. Each level introduces new types of buoys and contains also a repetition of already shown types.
Level 1 includes:
Starboard Hand Lateral buoys
Port Hand Lateral buoys
Safe Water Mark
Level 2 includes:
Level 3 includes:
Isolated Danger Mark
Level 4 includes:
Preferred Channel Mark, starboard hand
Preferred Channel Mark, port hand
Emergency Wreck Buoy
Every level includes 10 tasks - each with 3 questions.
To pass a level you have to answer at least 24 questions correctly
The final test includes 20 tasks with 3 questions each.
To pass the final test you must answer correctly on at least 54 questions.
- Name of buoy type
- Light characteristics
- Flashing lights
- Abbreviation in the sea chart
- Light Reflectors
Three types of tasks in The Test:
A. You will be given the name of the buoy and must answer correct on:
2. Flashing lights
3. Light characteristics
B. You will be given the appearance of a buoy and must answer correct on:
1. Flashing lights
3. Light reflectors
C. You will be given the flashing light of a buoy and must answer correct on:
Buy and use the index during day or night sailing to verify a buoy. Scroll through and touch the current buoy to see relevant information: Type, appearance, light characteristics, abbreviation in the sea chart, light reflectors and use. Also enclosed is advise on how to pass the buoy correctly.
The Index is a powerful support tool for new sailors and a useful instrument even for experienced sailors. The index is complied with IALA (Maritime Buoyage System).
Navigame Buoys is produced by Iver C. Weilbach & Co. A/S, Copenhagen.
If you want to know more about our company: www.weilbach.com
Applying modern and simple 3D interface designed to:
• Calculate the gross and reserve buoyancy with or without additional load.
• US Standard and Metric calculations.
User friendly with Introduction and How To Use showing formulae applied.
Calculations revised by approved group of naval engineers.
• Mobile and tablets Android with OS 4.x or higher.
• Internet connection NOT required.
Other SeaCalcs animated marine applications;
Airlift Pump, Barge Loading DWT Program, Box-Shaped Vessel, FWA & DWA, Purchase Systems, Gravity Block/Sinker Weights, Anchor Holding Power, Liquid Tank Program, Secondary Ports, Towage and Catenary wire depth, Winch Capacity/Load Tension and many more……….
How would you improve this application?
Personalize your spreadsheet with SeaCalcs animation?
• Send your comments and suggestions to: firstname.lastname@example.org
- Fits calculation: Upon entering the nominal diameter (of either bore or shaft), users select their tolerance classes for bore and shaft. The app then provides the complete ISO fits definition with all relevant values.
- Tolerances: Shows the tolerances for the most commonly used ISO tolerance classes.
- switch between metric and inch version.
- Charts: Shows the most common ISO tolerances classes in a diagram.
- Videos: Features the automatically updated latest TSS youtube videos.
The results of this application are based on ISO 286
following tolerances included:
Shaft: c11, d6, d9, d10, e8, e9, e13, f5, f6, f7, f8, g6, g7, h4, h5, h6, h7, h8, h9, h10, h11, h12, j5, j6, j7, js5, js6, js7, js9, k5, k6, k7, k11, k12, k13, m5, m6, m7, n5, n6, n7, p5, p6, p9, s6
Bore: E6, E7, E9, E11, E12, E13, F6, F7, F8, G6, G7,G8, H5, H6, H7, H8, H9, H10, H11, J6, J7, J8, JS6, JS7, JS9, JS8,K6, K7, K8, M6, M7, M8, N6, N7, N8, P6, P7, P8, P9
Support Email Address email@example.com
Support URL http://www.tss.trelleborg.com