Motion Detector Pro is a camera surveillance app, that uses the built-in camera to detect movements in the surrounding area using an advanced motion detection algorithm. If it detects movement it sends an email or a text message with a picture link to another cell phone, allowing you to remotely monitor an area using your Android phone. Motion Detector Pro can:
✓ Take a picture when the camera sees a movement and send it to an email or another phone. Great for catching thieves, watching your business/home or keeping an eye on your pet
✓ Start surveillance remotely by using text messages (with password protection)
✓ Indicate realtime on the phones display where the movement is detected
✓ Stealth mode which closes the app as soon as the phone is touched
✓ Store the surveillance images on the cloud or locally on the phones SD-card
Why the required permissions?
-Storage: Store surveillance images on the SD-card
-Your messages: For remote startup of the alarm (using text messages)
-System tools: For remote startup of the alarm (turns on the phone)
-Services that cost your money: Sends an SMS when the alarm is triggered
-Network communication: Access to the internet so the images can be sent
-Hardware controls: Access to the camera
-Your personal information: When you select a contact to receive the images
If you discover any bugs or problems don't rate it low - instead send an email to email@example.com and we'll see if it can be fixed before the next release.
*IF THE APP FAILS AT STARTUP, PLEASE RESTART YOUR PHONE AND TRY AGAIN*
Keywords: Surveillance, alarm, burglar, detection, camera, motion, detector, video, thief, theft, protection, spycam
This app measures magnetic field value using the built-in magnetic sensor that is built into your device. The magnetic field level(EMF) in nature is about 49μT(micro tesla) or 490mG(milli gauss); 1μT = 10mG.
If there is any metal in the area, the strength of the magnetic field should increase. Sometimes, this app used to find electrical wires in walls (like a stud finder) and iron pipes in the ground.
Usage is simple: Open this app on your device, and move it around. The magnetic field level will constantly fluctuate. That's it!
A lot of ghost hunters had downloaded this app, and they had experimented as a ghost detector.
The accuracy depends entirely on the sensor in your device. Note that the magnetic sensor is affected by electronic equipment (TVs, PCs, etc.) due to electromagnetic waves.
If this app does not work properly, it may mean that your phone's sensors are damaged, broken or non-existent. To initialize the sensors, point your phone up towards the sky and move it in a figure 8 pattern. Especially, a view cover with a magnet or a leather case with a magnetic snap can cause unwanted results.
* Do you want more tools?
Get [Smart Compass Pro] and [Smart Tools] package.
For more information, see the manual, Youtube video and the blog. Thank you.
How many times have you received a banknote and you were not sure if it was fake?
Well, that problem is over!
With our application you can check the authenticity of a ticket in seconds!
Plus you'll learn everything you need to identify counterfeits.
By simply putting the banknote on the scanner in a dark environment you will see:
- If the microfibers have inside the paper.
- The safety edge.
It also has information on the elements of security:
- USD American.
- Argentine Pesos.
Never receive a counterfeit!
Soon we will be adding more information about banknotes worldwide ...
You can either ring the buzzer sound when it detects, shoot the photos.
The number of detections so far (Detects) is displayed on the screen.
I can adjust the sensitivity slider bar (SensorLevel).
I can specify the presence or absence of the buzzer sound sound button (Sound).
I can specify the presence or absence of photography photo button (Photo).
It is stored in the photo folder of default photos taken.
Adjust the volume button on the device body volume of the buzzer sound.
Installation of OpenCV Manager is required to run.
If OpenCV Manager is not installed on this application run time
Please install because it jump to OpenCV Manager to Google Play of automatically.
This program uses the built-in camera to detect movements in the surrounding area. If it detects movement it sends an email or a text message with a picture link to another cell phone.
If it fails restart your phone and try again.
*There might be a problem with phones running Ice Cream Sanwich - this problem will be fixed in next update*
If your device is running Android 4.1 "Jelly Bean" or higher, you don't need this app anymore! You can just press and hold on notifications and your device will tell you who is generating them.
Currently detected frameworks include:
- Moolah Media
THIS APP DOES NOT *BLOCK* THESE ADS. It only tells you which applications are causing them. You must uninstall the applications this app identifies to stop the ads.
THERE IS NO OFFICIAL PAID OR "PRO" VERSION OF THIS APP. If you find an app with a similar name, description, and screenshots, odds are strong they have simply taken the source code and republished it as their own without any significant changes.
If you experience crashes, using Android's "Report" feature is likely to get it fixed. Leaving comments without any useful information is not :)
This app is open source - see the development page for full source code.
Small, innovative and very useful utility, allowing you to perform various actions using the motion sensor of your device.
Users of Advanced Screen Control would recognize some of the functionality and would appreciate the cleaner UI and the additional features. This is a continuation of my efforts related to the motion sensor utilization.
IMPORTANT: Please remove any other motion sensor apps before trying Motion Actions, to avoid interference. If you are using ASC, disable the Shake actions.
✔ Music: Play/Pause (Android 3.0 and up), Play Next, Play Previous;
✔ Turn the screen off and lock the device;
✔ Wake up the device;
✔ Toggle Auto-Rotation On/Off;
✔ Change the screen orientation, without releasing the orientation lock (Android 3.0 and up);
✔ Launch any app;
✔ Toggle the LED light On/Off (if available).
There are 2 configurable actions - one when screen is on and one when screen is off.
The app may use some battery power, depending on the settings. All settings which could affect the power consumption have a proper warning in the description.
TO UNINSTALL: Uncheck the "Screen Lock Permission" first!
AD SYSTEM: The app is ad-supported. It has a UNIQUE AD SYSTEM, showing an ad in the bottom of the screen after a use, but not more then once or twice per day. Ads are shown for very few seconds and have a button for immediate dismissal. By installing the app you agree to see those ads in the way they are shown. I do grant ad-free use to people who support the development otherwise. Contact me for more information!
This app is developed solely by me in my free time, initially for personal use, as I couldn't find such it on the market. I really like developing Android apps and I'm trying to make it a full time job. If you like my work and want to support my efforts - please give a 5 star rating and share it with your friends! You can also buy me a beer by using the in-app Donate option! Thanks!
Most of the permissions are self-explanatory and are needed by the app's functionality.
The INTERNET and the LOCATION permissions are needed by the ads - you would see ads very, very rarely and based on how often you actually use the app, but still - they do need those permissions.
The ACCOUNTS permission is needed to grant ad-free use to people who support the development otherwise.
No personal information is collected or sent whatsoever!
Add me on Google+, I'll discuss ideas for future features there!
Are you really sure that your phone is not being watched by one of these apps existing on the internet?:
- "Tracker Boyfriend" ... and many more?
When "hidden" is enabled you don't know that your cell phone are being watched and someone else will receive all your messages, call log, facebook messages, etc..!
With this application, "Spy detector" you can detect and remove these apps from your mobile phone!
Download on your phone and check!
(the spy apps database will always be updated very frequently).
*OPEN HELP FIRST
*If you're @ a PC, it'll screw with the readings, so set it on a desk, zero, then wave stuff on top of it.
*It can't detect some stuff like aluminum.
*D/L probs aren't me; contact google.
*Like it? Visit the site to donate.
App can enable motion detection on your DLink 932L and 942L cameras or quickly turn on or turn off all your camera's with the supplied widget.
The DLink 932 & 942 camera are IP-Camera's capable of sending emails when motion is detected in certain area's.
The supplied app by DLink enables most features of your DLink camera but it doesn't offer a quick way to switch your motion detection.
How to use:
Set up IP address and credentials for your administrative camera web page (not http://mydlink.com).
Usually at home this is 192.168.0... but for outside using you should set up static outside IP (if you've got) or you can use Free Dynamic DNS services like no-ip.com or other for getting access to camera outside the house (administrative camera web page has special DYNAMIC DNS setting page for this purpose).
keywords: camera entertainment episodes games shows movie video credit lawyer donate degree hosting claim
Metal Detector app uses your devices magnetic sensor to measure magnetic field values and turns your phone into a real metal detector. Data is displayed in µT (micro Testla). 1µT = 10mG (milli Gauss). The magnetic field in nature ranges from 25 to 65 µT (0.25 to 0.65 G). Any higher measurement is an indication of metal in the area. When there is metal in the area, magnetic field increases. App works best detecting ferromagnetic materials, such as iron and can’t detect non-ferromagnetic materials such as aluminum. App works best detecting metals up to 15cm away.
Metal Detector app is simple to use, just open it and move it around. If the magnetic field values rise there is metal in the area. Accuracy of the app is entirely dependent on the magnetic sensor in your device and is affected by electrical equipment such as TVs, PCs… due to electromagnetic waves.
If the app does not work as it should then the problem is in your magnetic sensor. Maybe your device does not have one. Or try to initialize the sensors by pointing your phone up and rotate it in a figure 8 pattern.
If your device's case has magnets or contains metal elements remove the case before using the app.
We were told ghost hunters use our app to use it for ghost detection :)
It is the application which detects a motion of the object reflected in a camera and reproduces picture preservation and a beep sound.
Please install in few places, a fixed stand, etc. of vibration in the case of use, and use it.
The camera is equivalent to both the front camera and the back camera. Please use a camera, changing according to a use.
During surveillance, a slide indication of the picture when an object is detected is given for every second.
After a stop, if a detection picture is clicked, an expansion display is possible and a picture is saved at external memories (SD card etc.).
The picture serves as a JPEG file format.
We recommend you to use it during surveillance, inserting a charge adapter, in order to consume many batteries.
Since I have the function to terminate application if generation of heat is detected so that a smart phone may not be damaged owing to generation of heat of a battery, please understand.
Please do not abuse this application by any means.
Since we do not take any responsibility, please understand.
■ When you would like to take a picture of the object which moves continuously
■ The simple security camera in a home etc.
■ Invasion detection of invasion prohibition area etc., warning
■ Beep sound
I sound a beep sound simultaneously with detection.
■ Log preservation
I save the detected time by text format.
■ Power-saving mode
I lower the luminosity of a display during surveillance and hold down consumption of a battery.
■ Picture quality
I can adjust to low image quality, a standard, and three high-definition steps.
■ Battery level
I terminate an application, when battery residual quantity becomes below a preset value.
However, I do not end during charge.
■ Preservation number of sheets
I set up the preservation number of sheets of the detected picture.
■ Detection sensitivity
Adjustment of three steps of response levels is possible.
2.3 or more Android(s)
[Confirmed terminal of operation]
Sony Ericsson Xperia SO-03D
Samsung GARAXY NEXUS SC-04D
Samsung GARAXY S III SC-06D
acer ICONIA TAB A500
ASUS Slider SL101
Automatic Enforcement System Malaysia
Others great app: Metromy : Railway Malaysia
Multiple Language support. (English, Chinese, Malay)
Able to work with GPS alone without Internet connection.
Assist driver Malaysia to override road trap.
Provide flexible adjustable setting in alert, distance and etc.
-always display nearest camera.
-provided with map to show AES camera, focus current location
-sharing current speed to whatapps, line & etc(*exclude facebook)
-add in "my location" 3D google map currrent location.
-easy swap speedometer & mylocation screen by scroll left right.
-replace AES map with latest 3D google map.
-alert sound trigger when AES camera detected within 1km,can be adjusted to 2km.
-allow update latest AES from server.
-allow disable alert sound.
(accurancy speed depend on your GPS signal)
-alert distance AES traffic light
-alert distance AES traffic light
-enable disable sound
-sound interval (5 second to 30 second)
-to display Fixed AES camera only or All proposed AES camera.
Total 14 fixed location list AES cameras installed by JPJ and other proposed location will be installed soon.
We can not guarantee that AES camera location is 100% correct.
But we will adjust location from time to time once receive feedback from user.
FAQ problem encounter
Ubaidullah: sound alert not working is very serious issue.
our team tested various type device. And all others working fine. please try.
Ans: a)make sure ur phone sound is not mute.
b)check ur preference setting.
user:nothing nothing between penang and alor star ones. I see only perak and kl got only.
user:)Prob Why your no of aes location become less? My detector always show the same name of location for the next location and no detection at all.
Ans:Setting- optional to show all camera or installed camera only.
Jason : Nice apps but something need to fix Coordinate of Slim River AES camera is not correct... Besides than this, I were satisfied with this apps... Good job...
Ans: slim river location adjusted. kindly update AES location.. please feedback.TQ
user:Problem after upgrade to ver 1.40 Maps always rotate, no more setting key. Pse do something, I prefer the previous version. Tq developer...
answer : Click ur phone menu button,refer screenshoot.
All previous function remain. Click menu button you will see. AES map is there, but V1.4 add on additional map track current location.
*Mohd Rizal (update NSE km 63.4 N 05 58.745` E 100 26.319`)
kindly email detail on above camera location
If you are looking for the app that uses AirPush or other push notifications, you can easily find the app and uninstall.
Besides push notifications, using this app is a great way to see what advertising agencies apps use, and what tools they have integrated.
Does the normal scan not detect the spam ads? Enable the notification monitor and you can easily see which program puts a notification in your notification area.
Another cool feature that we added is the live scanner. This scanner scans newly installed and updated apps for selected addon categories and displays a notification if they are found. This feature is reserved for users that have donated.
If you are getting shortcut spam on your homescreen, we've added a new icon ad monitor that should detect that too.
**To support us you can now easily donate through inapp billing.**
The current list of addons we detect: (note: addon definitions are updated from the server, so there may be more than on this list. Check the help function to see all the addons we can detect)
AirPush, Airpush Hidden (Suspected), Appenda, Beluga Boost, Custom PushAds (Appbucks), Custom PushAds (Bobgame), Custom PushAds (Feelingtouch), Custom PushAds (Letang), Custom PushAds (Nulldroid), LeadBolt, Moolah Media, Senddroid, TapIt
AdFonic, Adinch, AdKnowledge, Adlantis, AdMaker, Admarvel, AdMob, Admoda, AdSense, Aduru, AdWhirl, AirAd, Amobee, Appbrain, Burstly, BuzzCity, Cauly, Chartboost, Daum, Domob, Everbadge, GreyStripe, Huntmads, InMobi, Inneractive, JumpTap, Komli, Madhouse, Madvertise, MDotM, Medialets, Mediba, Millenial, MobClix, MobFox, MOcean, MoPub, Nexage, OneRiot, Papaya Offers, Pontiflex, Quattro, RevMob, Sellaring, Smaato, StartApp, Tapjoy, Vdopia, VSERV, Youmi, Zest
Apsalar, Claritics, Flurry, Google Analytics, InApp, Localytics, Medialets, MixPanel
aChartEngine, ACRA, ActiveAndroid, AndEngine, Android NDK, Angle, Basic4Android, BugSense, Corona, Crittercism, Dropbox, Facebook, FMOD, Fortumo, Getjar, Immersion Motiv, jMonkeyEngine, libgdx, Marmalade, MonoDroid, NullWire, OpenStreetMap, PayPal, PhoneGap, PowerVR Shell, RoboGuice, RobotMedia Android Billing, Ruboto, Titanium, Twitter4j, Unity3d, Urban Airship, Xtify, Zong
Beintoo, HeyZap, OpenFeint, Papaya Social, ScoreLoop, ScoreNinja, Skiller, Swarm
Airpush Icon, LeadBolt Icon, SendDroid Icon, StartApp Icon
Amazon Licensing, Google Licensing Service, SlideMe SlideLock
*** Known issues ***
Samsung Galaxy 3 keeps talking to me when on my home screens saying folder is open or similar.
This seems to be an ICS/Samsung bug. It happens for some people and also with other apps that use the accessibility service such as Tasker, Light Flow and others.
Try to fix it:
Samsung S3: - Go to Settings -> Accessibility -> Talkback "ON" - Select "Settings" from the bottom of the page - Uncheck all Talkback options - Switch Talkback "Off" again - Go back to Settings -> Application manager -> All - Disable Google TTS (text to speech) - Disable Samsung TTS (text to speech)
More issue details here: http://code.google.com/p/android/issues/detail?id=23105
We can't guarantee that our results are 100% correct. Sometimes addons, like pushnotifications, are integrated in larger sdk's, and the developer doesn't need to use them, although we detect them. We strive to be conservative about marking apps as suspected, but errors can occur.
More from developer
● send receive message
● check whether device is in range, PING function
● assign contact to device
● encrypt messages
Communication takes place directly between two devices equipped with this software, devices must be within communication range, devices must be paired and Bluetooth adapter must be enabled
If after pairing added device is not visible click on refresh button next to devices list, if didn't help go to settings and select "All devices"
If send button was pressed, but message was not received by other device, check message status icon
● if it's RED means that message was not delivered
● if it's GREEN delivered
● if it's BLUE, program is sending message, please wait
● permission to read and write contact is required for binding device to contact
● electromagnetic interference, obstacles can cause communication problems and ping function can return a negative result even though the devices are close to each other
Program allows you to lock or block access to selected application, access may be obtained by selecting pattern or PIN.
Program is working in different way than ordinary Applocker, doesn't terrorize user by requests entering password, works only when needed, login session is reset by screen or optionally by countdown timer, program always is trying to determine whether screen lock is really need it.
● Password or pattern have to be saved not only entered
● If you notice anything unusual, please let me know first, my email address is at the bottom of this page
● blocks access to selected applications
● add applications from list
● add application from screen
● two types of screen lock, pattern and pin
● session mode, single login for all applications
● ability to set wallpaper or live wallpaper instead solid color as background, may not work on all devices
● reset login after screen turn off
● reset login when application window disappears
● reset login after time
● reset login by clicking on notification
● reset login by clicking on widget
● blocking access to programs relevant to device safety, such as System Settings, Google Play, Application Installer
● ability to change lock screen style
● ability to remove launcher icon, to restore icon go to application detail in system settings and click on "Manage Space"
● vibration/beep feedback
● changeable visibility of pattern elements
● event log, whether user obtained access to application and when
● top bar can be visible or hidden, not available if using wallpapers and compatibility mode is off
● navigation bar can be visible or hidden, only for Android 4.4
● application can become device administrator
● screen lock animation
● import/export applications list to file
● random keypad layout
● If wallpaper is displaying incorrectly go to Advanced section in Settings and mark Compatible mode
● Notification shows authorization state for system, not for activity that is currently visible, manual authorization reset has no effect on the currently displayed window, as long is visible
● Before first use you have to create pattern or PIN
● App can be only installed in internal memory, because removing removable storage can be used to bypass lock
Turn your phone into a remote audio surveillance device or baby alarm or just a sound recorder, you can also detect sound for other apps such as Tasker or Automagic
Program uses built-in microphone so effects can be unsatisfying, reaction time depends on device performance and sample rate frequency, maximum sampling rate, will not work on all devices
● recording only when sound is detected in mp3 format
● send SMS when sound is detected
● send EMAIL when sound is detected, attachment available only if continuous recording is disabled
● continuous recording, create one big recording for all events
● event recording, create new recording for each event, but close events still can be merged in one recording
● sensitivity adjustment with sensitivity calibration helper
● adjustable length of recording, after sound is detected
● can work when screen is switched off
● event log, counter
● records duration limit
● records output file size limit
● select folder for records
● ability to send notifications to other applications such as for example Tasker, when it detects sound
● ability to control detector by other applications such as for example Tasker or Automagic
● widget to quickly enable or disable detector
● adjustable delay from turning to record or between events
● temporary storage feature
To use widget you need to move program to phone memory
● devices must be within the communication range
● devices must be paired and Bluetooth adapter must be enabled
● pictures are saved on server side
● preview smoothness depends on performance Bluetooth connection
● electromagnetic interference, obstacles and distance can cause communication problems even connection break
● if preview is stopped try to reconnect, if connection will be unsuccessful then restart server
To be sure the appropriate readings, perform calibrations for each of the three modes separately
Program allows to scan and generate 1D and 2D codes, exchange of contacts, interpret URI strings, allows to read codes from PNG, JPEG images
● scan QRcode
● scan Barcode
● scan PNG, JPEG
● continuous scanning mode
● flashlight mode
● save, copy, send generated code
● save, copy, send scanned codes
● Supported code types during scanning:
ITF, QRCode, Datamatrix, Codebar, Code 128, Code 93, Code 39, EAN 13, EAN 8, UPC A, UPC E
● Codes that can be generated:
QRCode, Code 128, Code 39, EAN 13, UPC A
● Store data using AES 256 encryption algorithm.
● Export/Import your encrypted data to an SD card.
● All data are saved locally, not subject to backup service offered by Android system
Remember to make copies of important data before placing them in vault, program offers data security based on AES algorithm with 256-bit key but the data is as secure as the password on which key is generated, remember to be adequately complex
Program offers two ways to enter a password, selectable 4-digit code, and up to 32 character password, the password is recommended choice if you need maximum security
Vault can store up to 1024 characters texts and files to 100KB.
Author is not responsible for loss of data due to use program
Program does not store your password or anything that lets you recover it, so in case of password loss data contained in the vault will be permanently lost
Area that stores sensitive data is not subject to backup service offered by Android system, a copy must be done manually because the data are permanently attached to a specific device
Change your device to a spy camera
Program allows you to take a pictures without revealing this, program manifests its work through small notification icon and a floating box that can be customized to your needs, floating box can be moved, floating box can be always visible on top, can appear only over selected application, floating box is also a trigger and status indicator
As the application starts you'll see in the middle of the screen small white floating box and notifications icon at top of screen, floating box is a camera trigger, notification is for managing application
● quiet and fast shooting
● choice of applications over which appears trigger
● changeable trigger appearance
● possibility of moving a trigger
● quick preview of captured image
● select which camera to use
● ability to turn off program after turning off screen
● ability to disable notification
● ability to disable vibration
● ability to disable adding images to gallery
● ability to change notification and launcher icon label
● widget to fast switch on and off
● to take picture click on button in notification or tap on floating box
● to switch off application, cancel notifications or click on application icon or long press on floating box
● to open settings click on button in notification or double click on floating box
● image resolution is limited, limitation depends on the device
● if auto focus option is selected taking picture may take longer
● changing label may take a moment, click home button to speed up the process
● Turn off display and quickly place phone flat so that display is facing down, all sounds will be muted except alarm
● When mute is turned on and off, you will be notified by vibration
● Turning screen will disable mute
● For fast turning on and off is a widget
● static mode, animation can be turned off
● changeable pixel fade speed
● changeable pixel color
● changeable pixel size
● changeable pixel padding
● changeable pixel brightness
● changeable pixel shape
● changeable background color
Poorly written programs may lead to increased battery consumption as the internet is disconnected programs are still trying to connect to a remote server, blocking the entrance processor to sleep.
● set application which will be launched by clicking on clock or date
● set date format
● mode 12/24 set automatically
● enable flashlight by touching on clock
● clock styles
● color changing
● consumes very little battery power
● countdown clock with signal
● permissions Camera and Drawing on other applications are used by flashlight
● permission Vibrate is used for countdown notifications
● find phone using location based on GPS, WIFI, GSM
● find phone by making it ringing and vibrating
● remotely lock device
● remotely wipe user data
● password protection to prevent unauthorized changes to application settings and system settings
● password protection to prevent unauthorized removing applications
● notification of changed SIM card
● low power consumption when inactive
● Permission to access Internet program uses only to get name of place which indicate geographical coordinates
● Functions Lock and Erase require that program is device administrator
● Program will not work if certain application are installed for example GO SMS