HARDWARE REQUIREMENT: ELM 327 (Clone Type) Bluetooth Adapter.
Convert your phone or tablet into a full-fledged diagnostic scan tool: read diagnostic trouble codes, clear the "Check Engine" light, check emissions readiness, estimate fuel economy and much more!
- Check and clear diagnostic trouble codes
- Read freeze frame data
- Display real-time data (over 90 parameters!)
- Customizable dashboards
- Emissions readiness for each US state
- Fuel economy MPG, l/100km or km/l calculation
- Multiple trip meters
- Log data to CSV format (compatible with Excel)
- Retrieve vehicle information including VIN number and calibration ID
- Oxygen Sensor Results (Mode $05)
- On-board Monitoring Tests (Mode $06)
- In-performance Tracking Counters (Mode $09)
- GPS tracking - plot vehicle parameters on a map in real-time
- Full diagnostic report that can be e-mailed
- English and Metric units
- Free unlimited updates
Carista can check your vehicle's health and report any faults stored its computers. Carista is compatible with all manufacturers and models, as long as they are OBD2-compatible (all 1996+ cars in the US, all 2001/2004 petrol/diesel cars in the EU, etc.) Unlike other apps, Carista also gives you access to advanced manufacturer-specific diagnostics*, including computers like ABS, airbag, navigation, etc. You can also clear any fault codes and reset your check engine light, airbag light, ABS light, traction control light, etc. for supported models.
* Manufacturer-specific diagnostics are a paid feature, available on a selection of 2005 and newer models from Volkswagen, Audi, Seat, Skoda (VAG), Toyota, Lexus, Scion. OBD2 diagnostics are free.
Carista lets you change the way your car behaves: say you want your headlights to come on automatically when you start the engine; or you want the doors to lock when you start moving; or you want to change the type of beep that the reverse parking sensors make. Yes, Carista can do that (if your vehicle supports it, of course). Customizations are a paid feature, available on a selection of 2005 and newer models from Audi, Lexus, Scion, Seat, Skoda, Toyota and VW. For Lexus, these are called Lexus Personalized Settings (LPS).
Carista's overheat alarm (a paid feature, 99 cents) allows you to monitor your engine's temperature and react early if it starts to overheat. Yes, most cars have a temperature gauge on the dashboard, but how often do you look at it? Carista can run in the background and notify you with an alarm sound right when the engine temperature starts to reach dangerous levels.
You need an ELM327 Bluetooth dongle/adapter in order to use Carista. We do not sell these; they are available from Amazon, eBay and a number of other merchants. See http://www.prizmos.com/carista/hardware/
No live data or dashboard
Please don't download this app if you're looking for display of real-time data. That's not the purpose of Carista, so please don't rate us negatively for lacking such functionality. Just use Torque for that.
Note: Carista is an OBD scan tool and diagnostics app with added functionality for the consumer. There is no separate Pro version, but there is a paid "Pro Package" within the free app that you can purchase using Google Play In-App Billing. The idea of this app is to provide a simple and efficient way to configure your car to your liking, diagnose your "check engine" or "service engine soon" light, and prevent your engine from overheating. Nothing more, nothing less. Carista is compatible with all vehicles that comply with OBD2 (sometimes misspelled ODB), including Toyota, Lexus, Scion, Honda, Acura, Nissan, Infiniti, Mazda, Mitsubishi, Subaru, Suzuki, BMW, Mercedes, VW, Audi, Seat, Skoda, Porsche, Opel, Peugeot, Citroen, Renault, Fiat, Alfa Romeo, Lancia, Mini, Lotus, Jaguar, Rover, Tesla, Chevrolet, Ford, Chrysler, Dodge, Jeep, Buick, Cadillac, Pontiac, GMC, Lincoln, Saab, Volvo, Hyundai, Kia. We have advanced functionality available in our Pro Package for a selection of models from VW, Audi, Seat and Skoda (VAG group) and Toyota, Lexus and Scion.
The following ELM327 and compatible OBD2 interfaces are supported:
APOS BT OBD 327
Everything completely in German and English. In the graphical representation of data, there are "pause" function. In this mode, the recorded data can be scrolled and zoomed by gesture.
We would greatly appreciate the feedback on the app. Please send us an email about your experiences, opinions or suggestions.
HARDWARE REQUIREMENT: ELM 327 (Clone Type) Bluetooth Adapter.
Vendors Type: CHX, OBDII, Vgate Bluetooth Device tested OK.
Do not attempt to enter information or adjust your device while driving. Failure to pay full attention to the operation of your vehicle could result in death, serious injury, or property damage. You assume total
responsibility and risk for using your device with this app.
Requirement: Android 2.0 or higher for Bluetooth to function properly.
The application will communicate with the vehicle computers at the 16 Pin OBD2 diagnostic connector. Most of the OBD2 connector location should be under the Steering Wheel Compartment. Elm 327 or STN Bluetooth device is required to make this application work. Car Gauge Pro not only can be exciting with gauges, it is a professional scan tool. Do you have a check engine light on? Do you want to know the Readiness Status will pass for a Smog Inspection? Do you want to check the functionality of the sensors and determine the status of the Mode 5/6 Emission On-board Test? Car Gauge Pro will show you.
✮ Mode 1 - Data Parameters with 220 PIDS
✮ Mode 2 - Freeze Frame Data
✮ Mode 3 - Check Current Faults
✮ Mode 4 - Clear Faults
✮ Mode 5 - O2 Sensor Test Result
✮ Mode 6 - Emission Onboard Test Result
✮ Mode 7 - Check Pending Faults
✮ Mode 8 - Enable Evap Test
✮ Mode 9 - Vin, ECU Name, Performance Tracking Data, CALID & etc
✮ Mode A - Check Stored Faults
✮ Ford (1996-2008) - Check/Clear Faults, Self Test, KOEO, KOER, Diesel Glow Plug/Injector Buzz/Cyl Contribution Test, Outputs On/Off, Low/High Speed Fan Test, and Enhanced Data 1175 PIDS (ISO, PWM, CAN)
✮ Nissan (2001-2007) - Check/Clear Faults, Self Test, Ignition Timing Adjustment, Idle Rpm Adjustment, Active Test and Enhanced Data 634 PIDS (KWP2000 - ECM, TCM, ABS, BCM)
✮ GM (1996-2007) - Check/Clear Faults, Active Test and Enhanced Data 189 PIDS (VPW Powertrain)
✮ Toyota (2000-2006) - Enhanced Data 150 PIDS (ISO - Powertrain) + Read/Clear Faults (KWP2000 Airbag)
✮ Kia (1996-TBD) - Enhanced Data (ISO Powertrain)
✮ Some Models may not support Enhanced Functions
Hardware Requirement: Elm 327 or STN Bluetooth Adapter.
Vendors: CHX, OBDII, VGate and OBDLink MX tested OK.
Want to know why the check engine light keeps going on? Check it with DashCommand.
Want to know what your horsepower, torque, or acceleration is, in real time? Display it with DashCommand.
Want to monitor and improve your gas mileage or fuel consumption as you drive? Do it with DashCommand.
Ever wished you had your own customizable gauges, showing only the data you were interested in? DashCommand can help.
NOTE: The free version of DashCommand is evaluation mode only. Full functionality requires an in-app purchase through Google Play.
--- SEMA Show 1st runner-up for best mobile electronics product.
--- Four time SEMA Global Media Award winner!
DISCLAIMER: DashCommand requires a compatible third party hardware interface, purchased separately, to communicate with the vehicle.
DashCommand supports all OBD-II and EOBD compliant vehicles sold worldwide. Please verify that your vehicle is OBD-II/EOBD compliant before purchasing!
OBD-II Hardware compatibility:
- ELM compatible Bluetooth (OBDLink Bluetooth, OBDLink MX, PLX Kiwi Bluetooth, OBDKey Bluetooth)
For more info see: http://palmerperformance.com/hardware
Get the benefit of multiple gauges without the overwhelming clutter and the expense!
(Note: Not all OBD-II compliant vehicles will have support for all of these parameters)
- engine speed
- corrected vehicle speed
- open/closed loop
- boost/vacuum combo gauge
- acceleration (and braking)
- power with optional drag correction (air & tire)
Fuel economy gauges:
- inst. fuel economy
- avg fuel economy
- avg fuel economy over 3 time periods
- distance to empty
- time to empty
- fuel level %
- fuel remaining in tank
- fuel flow rate gauge
- timing (spark advance)
- engine coolant temp.
- intake air temp.
- ambient air temp.
- manifold absolute pressure
- mass air flow
- fuel trims, short and long term
- percent engine load
- catalyst temp.
- fuel pressure
- lambda gauge
- air/fuel ratio
DashCommand also contains a sophisticated trip computer that maintains stats for up to 5 trips.
- distance travelled
- fuel consumed
- avg fuel economy
- fuel cost
- elapsed time
- drive time
- average carbon dioxide emission rate
- total carbon dioxide emission
- start date & time
- number of fillups
- avg fuel flow rate
- avg driving speed
- avg trip speed
- avg boost/vacuum
- avg engine speed
- max acceleration
- max engine power and torque at wheels
- number of stops
- max fuel flow rate
- max speed
- idle time
- max boost/vacuum
- max engine speed
- max braking acceleration
- max engine torque
- % distance travelled while not in gear
- % distance travelled in each gear
- % distance travelled in non-optimal gear
- % time spent while not in gear
- % time spent in each gear
- % time spent while in a non-optimal gear
- Read and clear diagnostic trouble codes
- IM Readiness status
- Professional skidpad showing lateral and accel/braking Gs with min/max indicators
- Race track visually maps out your location, acceleration and braking as you drive laps around the track allows you to visually analyze different race track laps to see how acceleration and braking changed from lap to lap thus helping you to improve your lap times on your next outing.
- Inclinometer shows rolling angle and vehicle pitch for off-roading.
- Full support for OBD-II diagnostics, find out why your check-engine light is on and clear diagnostic trouble codes (DTCs)
- Data logging, record and playback log files showing OBD-II and acceleration data
Also compatible with the Pioneer AppRadio 2
Visit the DashCommand product page for more info:
(Veja abaixo as informações para a exigência de tipo de hardware.)
Sistema de computador de bordo tem protocolos de sinal múltiplas e ELM 327 suporta muitos deles. Atualmente, os seguintes protocolos são suportados pelo aplicativo e deve ser um veículo compatível com OBD II.
Não tente inserir informações ou ajustar o dispositivo durante a condução. Se não prestar atenção total ao seu veículo, pode resultar em morte, ferimentos graves ou danos materiais. Você assume total responsabilidade e risco para a utilização do dispositivo com este aplicativo.
O aplicativo é configurado para a importação de peles de fundo, agulha e peles de calibre a partir do cartão SD. Você pode baixá-lo do site.
Tamanho mínimo de heap VM (24m). Qualquer coisa menor pode causar o aplicativo para forçar perto, enquanto ajustando o tamanho calibre.
Requisitos de hardware: ELM 327 (Tipo Clone) Adaptador Bluetooth.
Vendedores Tipo: CHX, OBDII, Vgate dispositivo Bluetooth testado OK.
A car has her own character, and like everyone does, you'd rather think your car as a real person, perhaps your best buddy? TalkyCar enables your car to speak her mind in human languages. With comprehensive built-in straight line and corner A.I., whenever there is any interesting performance result (e.g. 0-60mph, hard cornering, distinctive acceleration/braking G force and lot more) coming out of the engine or any driving event (e.g. drifting, poor revs management during intensive driving, engine cold start etc.) might be of your interest, TalkyCar will speak out to let you know what is going on with exact numbers in real-time. You can even customized an event (e.g. your best shift-timing, rev limit alarm) to let TalkyCar notify you when your preset criteria is met. TalkyCar could even tell jokes when you are bored with traffic.
Eyes-free and hands-free
TalkyCar is both eyes-free and hands-free. The application is highly automated based on voice interaction. So distraction to the driver is absolutely minimized, which is our number one design principle since the building of TalkyCar from day one. We want you to know these interesting numbers of your car right at the time when you are pushing towards your car’s limit without putting you in any kind of unsafe driving circumstances.
No drills, no suction cups and no wires
Not like many other applications, with TalkyCar, you don’t have to dock your phone somewhere in your car to get it to work. As long as TalkyCar is running on your phone, you can leave it in your pocket and even pick up any phone call without stopping data logging. It is absolutely hassle free during the entire installment and usage.
Difference between free/lite version and paid/full version:
The paid/full version has industry-leading cornering features, full straight-line features, more hot chick voice packages, and MANY other features not included in the free version.
We’re always happy to get your feedback and answer any questions at: email@example.com
This application is built by car enthusiasts for car enthusiasts. Please do let us have your thoughts, so we could make the application better and your driving experience better.
(for bug, plz specify your phone model, firmware version, car model and OBD adapter model)
Join fans' community on Google Plus:
Follow us on Twitter:
Compatible vehicle makes: Infiniti, Lexus, Acura, Ford, GM, Vauxhall, Opel, Chrysler, Mercedes, Volkswagen, Audi, Jaguar, Citroen, Peugoet, Skoda, Kia, Mazda, Lexus, Daewoo, Renault, Mitsubishi, Nissan, Honda, Hyundai, BMW, Toyota, Seat, Dodge, Jeep, Pontiac, Subaru, Scion and many more vehicle makes, European, US, Far East, etc.
An obd / obd2 / eobd / ELM 327 Bluetooth adapter. e.g. Scantool.net adapter, the OBDKey, and PLX Devices, OBDLink.
obd / obd2 / ELM327 adaptor links:
PLX Kiwi: http://plxdevices.com/product_info.php?id=GSSTBLUETOOTH
Scantool.net adapter: http://www.scantool.net/scan-tools/smart-phone/obdlink-bluetooth.html
cheap adapters on amazon: http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=elm327&rh=i%3Aaps%2Ck%3Aelm327
cheap adapters on ebay: http://www.ebay.com/sch/i.html?_odkw=obd&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0&_nkw=elm327&_sacat=0
※ This app required the ELM327 OBD2 Bluetooth adapter(dongle).
· Free trials for 30 days. ( ※ Please note. This application can be installed free of charge, are available free of charge during the trial period, but the monthly payment occurs when trial period has expired. USD 2.99/month or EUR 2.49/month or other currency )
· Adopted analog meter. You can use "OBD Mileage" as an additional meter app.
· Adopted multi-window system, enabling intuitive operation.
Here, I will explain the new features that have been added to the "OBD Mileage".
For details about all functions in old OBD Mileage.
Features of the new "OBD Mileage":
1. Analog meter display
Adopted the analog meter display with good visibility. You can choose an item from 34 different informations.
In addition, by describing the config.xml file, you are free to customize the color and hand angle.
2. Window display
There were well-established in the old "OBD Mileage", the information displayed by graph and character is now in the "Window display". You can see and compare lots of informations on one screen.
3. Tag information display
You can paste the Tag information to your favorite screen.
※ Please move Tag information again when you change the orientation of the screen.
4. Adopted multi-window system
You can mix maximum 10 windows on the screen. The following operations are available.
Move the window.
Show the next page.
· Double tap
Switch to full screen view or normal view.
· Long tap (press and hold)
Display the pop-up menu.
Reduce or enlarge the window.
※ Please operate it very slowly. In certain model, this operation can not be performed. Please see the information at
the end of this document for the workaround.
5. You can continue using the old "OBD Mileage" data.
You can continue using the correction factors of old "OBD Mileage". Also you can continue using the contents of the working directory of micro-SD card.
6. 30 days free trial
You can use all features free during 30 days with no advertisement. Take this opportunity and try the new "OBD Mileage".
※ Please note
1. To use this application, you must connect an OBD Bluetooth device (based on ELM327) to OBD2 connector. Please check our website about available OBD Bluetooth device.
2. "Adjustment driving" is required to display the exact fuel efficiency.
3. This application is corresponds to the device of Android 2.2 or higher, but it does not guarantee the operation of the device of all Android 2.2 or higher. Please try this application enough during a free trial.
4. Same as the above, this application does not guarantee the operation in all car models.
5. This application can be installed free of charge, are available free of charge during the trial period, but the monthly payment occurs when trial period has expired.
6. If you want to cancel the monthly payment, please log in the Google Play WEB and view the "My apps" and cancel the "a Monthly License (OBD Mileage 2)".
7. If you cancel the "a Monthly License (OBD Mileage 2)" during free trial 30 days, free trial will be terminated immediately.
8. If you see the bug or something, please let us know the content of the problem. We will respond as soon as possible. Problems that are currently known are as follows.
· There are times when pinch-in/out operation is not possible (in some devices).
In such a case, move the window to the upper left corner of the screen and then operate pinch-in/out. Or switch to full screen by double-tap and then operate pinch-in.
· There are times when the window is broken (in some devices).
In such a case, please reduce number of windows. Or shrink the size of window.
· Application is heavy.
In such a case, please reduce number of windows.
Boosted Air Temperature
Wastegate Duty Cycle (beta)
Actual Pedal Pos
*Requires the latest Pro version of the application "Torque" to function. Will not work with the Lite version of Torque.
WGDC is currently in beta, meaning it should be accurate, but until I get some solid feedback stating its good then I would not suggest you use this value for tuning.
1) Check to see that the plugin is listed in the "Installed Applications" of your Android device.
2) Check that the plugin is listed in Torque under "Settings" -> "Plugins" -> "Installed Plugins..."
Initial Configuration Instructions:
1) Be sure to have an active internet connect for purchase authorization.
2) Launch Torque and go to "Settings"
3) Scroll down to "Manage extra PIDs/Sensors".
4) Unless you have added any pre-defined PIDs in the past, this screen will not have any existing entries shown.
5) At this point the installed PID plugins are loaded into Torque and purchases are validated. From the menu, choose "Add predefined set".
6) If the purchase was validated corectly, you should see an entry for "Mazdaspeed 2007-09" in the list. If you do not see the entry, then the validation may still be in process or the plugin may not have been installed correctly. Go back to step 4, and wait 10 seconds or so before continuing. This should give all validations time to complete.
It is primarily targeted for car enthusiasts to let them diagnose their own cars.
Now in English, Russian and Hungarian!
Now with Engine, Automatic transmission, ABS, SRS, Power Steering diagnostic and BCM support!
The only Opel/Vauxhall/Holden diagnostic tool for Android!
ScanMyOpel features include:
- native support of Electronic control units used in Opel/Vauxhall cars, which distinguishes ScanMyOpel from many other diagnostic applications providing only limited generic OBDII support
- monitoring various dynamic parameters of engine, automatic transmission, ABS, EHPS and other ECUs
- reading of static data: ECU identification, fault codes with their current statuses and symptoms
- clearing of fault codes
- Displaying environment information on trouble codes where applicable
- Displaying nominal values of livedata parameters where applicable
Fault code status meanings:
red - present
yellow - intermittent
green - not present
Current software version supports ONLY engines of the following Opel/Vauxhall models:
- Agila A
- Astra F (MY96+)
- Astra G
- Corsa B (MY97+)
- Corsa C
- Frontera A (25TDS engine)
- Frontera B (X22DTH/Y22DTH engines only)
- Meriva A
- Omega B (MY97+, except X25XE/X30XE, Y25DT engines)
- Tigra (MY97+)
- Tigra B
- Vectra B
- Zafira A
The ECU type is detected automatically.
ScanMyOpel supports ELM327-based Bluetooth interfaces on all Bluetooth-enabled Android devices. Please note - could be compatibility issues with some noname ELM327 interfaces. If you are experiencing problems with establishing stable connection with the ELM327 interface, please send us the following information:
- phone model
- version of Android OS
- ELM327 version
- name of the BT device
Recommended ELM327 version is 1.4/1.4+. Proper connection with Chinese versions of ELM327, other then 1.4, is not guaranteed. Also, mini-OBD chinese interfaces in general do not work properly.
Also, in case of any issues it is possible to save log and forward it on firstname.lastname@example.org for troubleshooting. Log creating can be enabled from the application menu. Log files will be stored on the SDCard in "ScanMyOpel" folder.
Since in ELM 327 is used only pin 7, you may not et connected to other modules, which are connected to other pins in the OBD plug. In order to benefit all features of ScanMyOpel application, please connect together pins 7, 3 and 12 in the ELM327 adapter.
Please try our free Lite version to see if your car is being supported properly BEFORE purchasing the full version.
*** Feel free to email (email@example.com) us directly for issues and support before commenting with low ratings. Thanks! ***
Support forum can be found here:
ECUTracker(alpha) allows you to view information about the operation of your vehicle in real-time. Monitor your Fuel Trims, ignition timing, and even a real-time view of your mileage right from your Java enabled mobile phone. Or, if you have an InCarPC, ECU Tracker SE will run on any Java Enabled computer. The real power of ECU Tracker is that it allows you to define what you see and how you see it. You configure what it looks like here through our online configuration interface, then simply tell ECU Tracker to retrieve your configuration.
- Subaru SSM
- Innovate LC1
To setup your own customized interface, go to www.MyMPGTracker.com .
If you are having problems with ECUTracker, please post bugs and issues on the main website forum.
The release number indicates that this is not a new app. While ECUTracker has been around for quite a few years in J2ME and J2SE form, it's pretty new to Android. Hence, the (alpha) status.
This app will interface with any Bluetooth OBD-II dongle with "OBDII" as its name, which is the majority of ELM 327 devices out there.
This app provides a terminal to your dongle so you can perform ANY command. Google "OBD commands wiki" for the list of commands.
"03" to read fault codes. The device will respond with "03 43" followed by your 4 digit fault code.
"04" to erase fault codes and turn the MIL off.
Further support for more dongles may be added. E-mail me if you would like yours added.
A few of the features include:
- Logging of all standard OBDII parameters, with more being added in every release.
- Integrated graphing and analytics
- The ability to compare one log to another, including the ability to overlay graphs (see screenshots!)
- Time stand-still acceleration: 0-30, 0-60, 0-70, 0-80, 0-90, 0-100, etc...
- Time drag strip information: 60', 330', 1/8 ET & MPH, 1000', 1/4 ET & MPH
- Time incremental acceleration: 10-20, 20-30, 30-60, 60-100, etc...
- Ability to add notes to logs
- A "no wait" timing mechanism that ensures you get every bit of speed possible out of your OBDII module.
- The easiest to use interface of any other logging app
TestDrive also includes a feature called "SmartLog" which is something no other app currently offers. SmartLog is meant to be used when you want to time acceleration and log information from a standstill. It works beautifully at the drag strip. Simply enable SmartLog while in the staging lanes and click "Start". SmartLog will begin to listen to your vehicle's data all throughout your burnout and staging. Once you launch, SmartLog will begin to log the data and automatically turn logging off once the race is over. No more fumbling around to turn off logging or having to deal with extra "non-race" data! You literally set it and forget it.
Unlike some other apps currently out, TestDrive is a focused effort to give racers and enthusiasts the best, clearest, and easiest logging app possible. TestDrive isn't cluttered up with crazy looking gauges, useless features, and incredibly complex functionality. It's goal is simple - to help you go faster, more consistently.
TestDrive requires an OBDII Bluetooth module to function. Any module that is listed as "ELM327" should work. Simply search for "ELM327 Bluetooth" on Amazon or eBay - these modules can be had for under $20. Or if you already use a different app, such as Torque Pro, Dashcommand or OBD DroidScan, and you use Bluetooth with it, your current module should also work with TestDrive.
Keywords: Data Log Logger Horsepower Torque OBD2 OBDII OBD Drag Racing Timer Timing RaceIQ RacersLog
- report detonations
- show throttle position
- monitor engine coolant and intake air temperatures
Knock Detector is Torque Pro plugin - install Torque Pro first and start Knock Detector from Torque's main menu and make sure OBD2 adapter is connected. While driving at low rpm on 3rd gear just press throttle to max position and wait a safe period of time. Test will start automatically and finish as you depress pedal. Notification sounds will be played. Test will cover the passed rev range. If testing on automatic gear box ensure that gears are not switched during the test.
Warning - please ensure safe driving conditions - highways only !!!
In order to work on all car models Knock Detector uses heuristic algorithm to find detonations. It is based on analysis of timing advance, throttle, revs and speed. On some ECUs it may report knocks but the reason could be timing retard because of specific factory tune.
Knock Detector will not report minor car specific knock events so it can also miss some detonations. However it will report ECU learned detonations. Such knock events will likely disappear at some moment. Detonations can be real or fake, they can appear and disappear, so there is no reason to worry if such are reported. Detonation may be caused just by depressing the throttle at high revs. Some stock ECUs pull timing 0.5 - 1.00 even on WOT so fake knock will be detected.
Engine coolant and intake air temperaturesare also monitored as major knock factors. Avoid spirited driving or testing when both values are not green - too cold or too hot temperatures can cause detonations.
More features are coming soon. Used every day on my heavily modified Subaru STI ! Drive safe and have fun !
For more info please check http://jobrefactor.com
Русские друзья, вы должны установить Torque Pro с OBD2(ELM327) устройство. Спасибо !
Amis français, vous devez installer Torque Pro avec OBD2(ELM327) engin aussi.
Outros aplicativos deste desenvolvedor
An OBD II engine ECU diagnostics tool that uses a cheap bluetooth ELM / OBD adapter to connect to your car OBD2 engine management system
Some features include:
* Shows and Resets engine fault codes / DTC trouble codes stored in your car
* Can export map/track log files to Google Earth KML / CSV
* Engine performance data(0 to 60, 0-100, quarter mile, etc) (full version)
* Head up Display / GPS HUD mode perfect for checking your speed at night
* Data Logging functions including web upload and file logging, you can even upload data to your own web server from sensors you choose
* Customisable dashboard with theme support - setup the dashboard with the gauges and dials that you want
* Can help you fix your car and helps keep car repair costs down!
* Turbo Boost gauge support for VW vehicles (in Pro version only)
* MPG for Petrol/Gasoline vehicles. (Pro version has diesel support)
This is the free/basic version - it lets you get a feel for the application and lets you find out if it works with your vehicle / obd2 adapter combination; but may contain some small bugs including not working on some nissan/chrysler/subaru ECUs. The paid version has support for more vehicles and ECU types, looks a lot nicer, and works with more cars / trucks
The paid version has more features (HorsePower,Torque, 0-60 , quarter mile tests, graph data, map / track views) + no adverts and exra dial/display types! and better ABS / Knock sensor support, Transmission temperature support for some makes of car / trucks (GM / Ford, etc), and Turbo Boost on many more vehicles (including VW)
Works on vehicles made by Ford, GM/Vauxhall/Opel, Chrysler, Mercedes, Volkswagen, Audi, Jaguar, Citroen, Peugoet, Skoda, Kia, Mazda, Lexus, Daewoo, Renault, Mitsubishi, Nissan, Honda, Hyundai, BMW, Toyota, Seat, Dodge, Jeep, Pontiac, Subaru and many more vehicle makes, European, US, Far East, etc. Some vehicle ECUs may support more/less features than others.
**PLEASE NOTE!** Any reports of hanging or freezing after quitting the app is due to a bug in the HTC Evo 4G and Galaxy Tab, this can be triggered by using the Pandora/Vlingo/Aldiko bluetooth enabled apps. Disabling Pandoras new bluetooth settings fixes the problem, but HTC/Samsung need to release a fix. Please contact their support and encourage them to fix, Thanks!
The pro version supports USB ELM adapters which are use 'Prolific' or 'FTDI' chips
* Update: A freeze/hang workaround has been found after a great amount of effort and is available in the full version in the General Preferences settings!
* Quick and easy display of available ECU sensors
* OBD PID scanner to quickly map and locate extended PIDs
* Simple Telnet server that allows direct connection to the adapter to allow far easier debugging (aimed at developers)
The main application - Torque - allows you to connect your android device to your cars engine management, and read various sensors, even retrieve fault codes (DTC) and clear them once fixed. It can post to Twitter, log data, supports themes, and so much more!
If you are interested in developing your own plugin then you can find an example app here(which uses AIDL): http://ian-hawkins.com/torquescan.zip
Join the Torque forums (click the developer link below) for more information or to ask questions!
Note: This plugin needs the full version of Torque
Velocidade HUD usa seu GPS e tela de telefones para mostrar a sua velocidade
Você pode inverter o texto para que você possa colocar o telefone no seu painel durante a noite e ver a sua velocidade em seu pára-brisa, mantendo seus olhos na estrada e não olhando para o velocímetro
Você também pode:
* Log e exportar arquivos KML para Google Earth
* Suporte Speech - obter velocidade e avisos da câmara (com o arquivo de banco de dados apropriado)
Veja o 'Torque' app para mostradores mais / widgets e layouts de painel personalizável!
Perfeito para ver como você estava dirigindo!
Algumas características são:
* Assista ao vídeo que você fez com OBD dados (velocidade, pressão do turbo, rpm) GPS, acelerômetros sobreposto ao vídeo.
* Google Maps sobreposição semi-transparente que você possa assistir a sua posição num mapa, bem como o vídeo ao mesmo tempo.
* Pode gravar em vídeo Hi-Def/HD ou Baixa-def (uma opção nas configurações).
* Layout do painel de gravação como você quer, pressione e segurando na tela.
Mais sensores e medidores serão adicionados nas versões próximas!.
Se você tem um recurso que você deseja ver no aplicativo, por favor me usando o link desenvolvedor de contato abaixo!.
Mais recursos OBD será adicionado como o aplicativo amadurece! Se você tem uma característica especial que você quer ver adicionada, me mande uma mensagem ou postar nos fóruns e eu vou ver o que posso fazer!.
Confira os fóruns Torque em http://torque-bhp.com (clique no link abaixo desenvolvedor).
Transferência de vídeo (incluindo superposições) de que o telefone está sendo olhado.
Nota: Este plugin necessidades a versão completa do Torque
You can run around killing other players or NPCs via PvP, chat to other players using the online chat function and also level up your character, including battling other factions, and do some quests using the new questing system
Winter Sun has large maps to explore and also features dungeons, clans, and different factions. Will you be a druid bent on the destruction of the realm, a knight of the Protectorate charged with rooting out all evil and destroying it, or a Monster causing destruction and chaos wherever you go?!
The MMO will support instances and equip screens (so you can wear armour, swords, etc)
Please note that there may be some bugs whilst it is being developed, and things that don't work. At the moment you can 'chat' to other players and kill things, go inside the shop and buy and sell things (there is no auction house,... yet!)
Feel free to mail suggestions to the developer link on where you want the RPG to go - I have yet to do things like a instance system so there is an opportunity to help sculpt what the game is going to be!
Este é um add-on para Torque Pro, o app carro OBD2 para monitorar seu veículo de gerenciamento de dados do motor.
Você pode encontrar Torque no Android Market Ele permite que você exiba vários mostradores e widgets do aplicativo no seu homescreen android!
Monitorar todos os sensores padrão OBD2 como você pode no aplicativo, como refrigerante, RPM / Revs, * temperatura de transmissão, knock * retardar, MPG, HP e torque!
Este widget necessidades do app OBD Torque, e será iniciado automaticamente Torque para executar em segundo plano como um serviço.
Ela irá então automaticamente se conectar ao seu veículo quando você começa uma viagem e começar a mostrar informações!
Suporta telefones, comprimidos, tabletes e execução do favo de mel
* = dependente capacidade no veículo.
Imagine being able to keep your phone in your pocket and still be able to see a digital boost gauge readout on the LiveView display, or any other OBD2 sensor that Torque can read.
The plugins display will even match the graphical theme you have selected in Torque itself!
Now supports HUD mode (heads up display) mode, so you can put the LiveView device on the dashboard and see it reflected in the windscreen at night!
The 'LiveView' device is a little 'remote display'. You can find them on sites like ebay and they're not too expensive.
Please note: This plugin needs a handset which can handle multiple bluetooth concurrent connections in a reliable manner. Not all handsets are able to do this due to various bluetooth driver bugs so some phones may be a little troublesome to setup. The LiveView devices can also be a little 'temperamental' at times so make sure you have the latest firmware update from it (available on the sonyericsson site)
Imagine being able to keep your phone in your pocket and still be able to see a digital boost gauge readout on the LiveView display, or any other OBD2 sensor that Torque can read.
The plugins display will even match the graphical theme you have selected in Torque itself!
The 'SmartWatch' device is a little 'remote display'. You can find them on sites like ebay and they're not too expensive.
Please note: This plugin needs a handset which can handle multiple bluetooth concurrent connections in a reliable manner. Not all handsets are able to do this due to various bluetooth driver bugs so some phones may be a little troublesome to setup.
Sempre quis farejar e traçar os pontos de acesso Wi-Fi abertas indescritíveis?
Este scanner wi-fi usa o GPS e WiFi em conjunto para procurar hotspots Wi-Fi, em seguida, guarda a sua localização em um arquivo que você pode exportar um arquivo KML para Google Earth, exportar para o Kismet, ou usar envios web em tempo real para digitalizar e upload em tempo real!
Excelente para wardriving em seu carro, para digitalizar lotes de hotspots - ele pode lidar com registro da posição de milhares de AccessPoints sem bater sem postar duplicatas.
Muito útil para pesquisas no local (verificação de pontos inseguros de acesso Wi Fi), ou levantamento de grandes áreas, como parte de uma auditoria de segurança maior. Tem abrandar opções para a digitalização enquanto a pé, bem, então você pode ir para um passeio ou uma corrida ao redor de um site eo scanner continuarão a funcionar sem consumir muita energia da bateria
Ele também pode ser usado se você tiver apenas um interesse passageiro em ver o que está lá fora - por exemplo, você poderia ter uma unidade em torno de seu centro da cidade e ver o estado dos pontos de acesso (aberto, seguro, inseguro, etc).
A exportação CSV permite exportar os dados para manipulação em seu editor favorito planilha (Excel, OpenOffice / BrOffice), ou visualizar os pontos de acesso que utilizam a exportação KML.
Se você tiver alguma sugestão, mande-me um e-mail usando o link "developer" e eu vou ver o que posso fazer!