The tool is based on NIST Refrigerant Properties and is using the Antoine equations for the conversion. You will be able to see both dew and bubble point for refrigerants with glide.
How to use
On the left side of the screen a slider quickly helps you find the pressure or temperature reference. On the right side you can find the precise pressure and temperature. You can type in the precise pressure or temperature reading, and Refrigerant Slider will instantly give you the corresponding figure and move the slider for visual indication.
You can easily change pressure and temperature units within the most used metric (SI) and imperial units and switch between gage and absolute pressures as you please.
Danfoss engineers technologies that enable the world of tomorrow to do more with less. We meet the growing need for infrastructure, food supply, energy efficiency and climate-friendly solutions. Our products and services are used in areas such as refrigeration, air conditioning, heating, motor control and mobile machinery. We are also active in the field of renewable energy as well as district heating infrastructure for cities and urban communities. Our innovative engineering dates back to 1933 and today Danfoss is a world-leader, employing 22,500 employees and serving customers in more than 100 countries. We are still privately held by the founding family. Read more about us at www.danfoss.com.
The Refrigerant Slider (“the Application”) is provided on an “as is” and “as available” basis for the intended purposes as determined by Danfoss only and any use hereof is at the user’s sole risk. The Application and results and information generated thereby cannot substitute technical advice but must be verified by the user, they are not promises and should not be relied on as accurate data or analyses.
Danfoss disclaims all warranties and conditions regarding the Application, whether express, implied, or statutory, including, but not limited to, conditions of merchantability, satisfactory quality, and fitness for a particular purpose, accuracy and non-infringement of third parties’ rights. Danfoss does not warrant that the Application will meet your requirements or that the operation hereof will be uninterrupted or error-free.
To the extent not prohibited by law, in no event shall Danfoss be liable for any direct, special, indirect or consequential damages, whatsoever, including, without limitation, damage to property, damages for loss of savings or profits, or loss of data arising out of any use of the Application.
Refrigerant Slider support, please send e-mail to: email@example.com
Please visit www.danfoss.com for more information and contact details.
For more information about local support please visit http://refrigerationandairconditioning.danfoss.com/contact/
The Danfoss Heating app for installers is like having a second toolbox right in your pocket at the point of installation. It can help you install Danfoss products in a number of ways, and assist in the sales process with a wide range of marketing and support material. For example, this app helps you make on-site energy savings calculations for customers who may be considering converting to the new living by Danfoss ® thermostats or upgrading to a new floor heating system. The app makes hydronic balancing calculations and conversions quick and easy.
Some of the ways this app can help you in your daily work include:
Radiator Thermostat Support
• Ease installation with a unit calculator for living by Danfoss ® products like living eco, living connect and Danfoss Link.
• Calculate pre-setting of radiator valves by selecting radiator type and size to get correct valve pressure settings.
• Increase sales with support tools for living by Danfoss ® products, such as a return on investment calculator, product facts and sales material.
• Use installation videos in the app to assist you onsite during installation.
Floor Heating Installation Support
• Calculate costs of installing CF2+ Danfoss wireless floor heating system for your customers in both new build and renovation projects.
• Improve sales support with a product video featuring key user benefits and facts about CF2+ .
• Watch Installation videos for easy reference anywhere and anytime you need them.
Balancing Valve support
• Calculate flow and pressure measurements easily with the built-in equation tool.
• Convert pressure, flow and power and temperature between metric and non-metric systems, Celsius and Fahrenheit and various other measures easily. A handy tool for all HVAC professionals.
Additional features of the Danfoss Heating app include personalization options by specifying your “favorite tools”. You also get handy contact information for the nearest national Danfoss sales office and easy access to the latest news from Danfoss.
Danfoss is a leading company in the heating industry offering a wide range of components and solutions for generation, distribution and use of heat for comfort and energy savings in home and buildings. By continuously improving products and services, we strive to build strong relations to customers and business partners throughout the value chain. We have manufacturing facilities in more than 10 countries, and sales companies and agents in all heating markets worldwide.
-Supporting Danfoss AK-SC255, AK-SC355, AK-SM800 series controllers
-Address book to store your site connections
-View live current status of plant (Refrigeration/HVAC/Lighting/Energy/Miscellaneous points)
-Device detail view (Refrigeration/HVAC/Lighting/Energy/Miscellaneous points)
-Read/Write parameter access
-Alarm management (View current alarms, Acknowledge alarms, Acknowledge list, cleared list)
Use suction pressure, liquid pressure, superheat, subcooling, amperage, and humidity control to determine what problem the system has.
Furthermore, this is the only PT app with the ability to use imperial and metric units at the same time. And best of all… it’s free!
Refrigerants currently available:
R-11, R-113, R-114, R-115, R-116, R-12, R-123, R-124, R-125, R-1270, R-13, R-134a, R-14, R-142b, R-143a, R-152a, R-21, R-218, R-22, R-227ea, R-23, R-236fa, R-245fa, R-290 (Propane), R-32, R-401A, R-401B, R-401C, R-402A, R-402B, R-403A, R-403B, R-404A, R-405A, R-406A, R-407A, R-407B, R-407C, R-407D, R-407E, R-408A, R-409A, R-409B, R-41, R-410A, R-410B, R-411A, R-411B, R-412A, R-413A, R-414A, R-414B, R-415A, R-415B, R-416A, R-417A, R-418A, R-419A, R-420A, R-421A, R-421B, R-422A, R-422B, R-422C, R-422D, R-427A, R-500, R-502, R-507A, R-508A, R-508B, R-600a, R-717 (Ammonia / NH3), R-744 (Carbon Dioxide / CO2).
Each refrigerant is represented by a “dot” above the pressure wheel. Swipe left or right across the refrigerant bottle to switch to the refrigerant you desire. The color of the refrigerant bottle will match the official code for that refrigerant. The oil type, global warming potential, safety group, and corresponding pressure temperature wheel are also displayed. Swipe the temp –pressure wheel left or right to view the saturated pressure and temperature values.
The units are specified by using the buttons on the sides. If a unit is highlighted green, then the wheel beside it displays values in that unit. Additionally, the font color of the wheel will match the font color of the button selected. Any combination of units can be selected to view, such as Celsius and psig or Fahrenheit and bar at the same time.
Press the arrow on the left or right side to jump to either end of the wheel. The left arrow will move to the lowest temperature available and the right will move to the highest temperature.
Touch the “Refrigerants” menu button to narrow down the list of refrigerants available.
Each refrigerant that has a checkmark will be available to view from the main screen (and represented by a “dot”).
More Information Button:
Additional information can also be found for each refrigerant by touching the "Ref. Info" menu button.
Here information such as molecular mass, critical temperature, critical pressure and other valuable data can be found.
This has been designed and developed for distributors and installers, with the following objectives:
-To provide a useful contribution in the field, when product information is needed during installation or maintenance, such as parameter tables, alarm tables, connection diagrams and instruction sheets, thus helping the installer in their every day work, and making access to this information faster (and therefore less costly).
-To offer a tool for selecting the most suitable solution: starting from the application (e.g. cold room, bottle cooler or refrigerated cabinet), the App suggests the most suitable product, consequently simplifying the selection process for the distributor and installer.
-To offer a CAREL alternative to other products available on the market. Distributors or installers who want to use a CAREL controller for a specific application can now refer to a table with complete comparison of compatible instruments.
The current version included: easy, ir33, ir33+ and MasterCella.
New Languages version --> COMING SOON!
Change settings for saving energy while maintaining the comfort
See current status of sensors, pumps and motor valves for all circuits
Change the daily schedule to suit your everyday life
An ECL Comfort 310 district heating controller from Danfoss District Energy and a user account at the ECL Comfort 310 portal on ecl.portal.danfoss.com. International users should change the server address to http://ecl.portal.danfoss.com under the portal configuration menu after installation.
Refrigerants used: 22,11,12,13,14,21,32,113,114,123,123A,124
If you are a technical person who uses refrigerant properties, this program can be a great tool that will save you and your company time and money.
Starting from the data relevant to the working temperature and cooling/heating capacity, the application calculates the valve size suitable for the manufacturer needs.
The algorithm model that makes the calculations has been developed thanks to the CAREL yearly experience in several application fields.
The app is available in both the International Metric System (SI) and the Imperial system.
Overview of connected inverters and their current status. For troubleshooting detailed inverter data can be fetched
Keep track of total production, revenue as well as saved CO2 emission
Graphical representation of daily, monthly and yearly yield
Works through Smartphone, tablets and internet browsers via local network or remotely via the internet, just type serialnumber.clx.danfoss.com
Available in: German, Italian, Danish, English, French, Italian, Spanish, Czech and Greek
Choose living by Danfoss and you choose products which combine excellent functionality, total comfort and aesthetic appeal.
Quickly estimate typical and heavy walk-in cooler and freezer refrigeration loads from 6x6 up to 40x40 with an 8 or 10 ft height.
Also includes estimates for motors, lighting, and occupancy loads plus air changes and useful electrical formulas.
User can manually adjust the refrigeration load by adding in values found in the "More Estimates" section.
A useful tool for the refrigeration tradesman.
Refrigeration load is based on a 95* ambient.
Designed by and for the refrigeration service engineer.
HERZ FH calculates and visually represents output information:
maximal overall floor heating surface area heated with single heating loop (pipe length up to 100m)
overall pipe length for complete floor heating system
number of heating loops (for choosing distributors)
The most important and most useful outputs are:
overall heating mediun flow
heating capacity of the floor heating system
pressure drop (for circulation pump sizing)