Gas-Liquid And Liquid-Liquid Separators is divided into six parts: Part one and two covers fundamentals such as: physical properties, phase behaviour and calculations. Part three through five is dedicated to topics such as: separator construction, factors affecting separation, vessel operation, and separator operation considerations. Part six is devoted to the ASME codes governing wall thickness determination of vessel weight fabrication, inspection, alteration and repair of separators500 illustrationsEasy to understand calculations methodsGuide for protecting downstream equipmentHelps reduce the loss of expensive intermediate endsHelps increase product purity
Designed for those new to FTIR, but with enough reference material to appeal to journeyman and expert spectroscopists, this book does not demand any extensive familiarity with chemistry or physics. Specializing in concise and comprehensible explanations of FTIR topics, the author introduces the field of infrared spectroscopy, including the strengths and weaknesses of FTIR as a chemical analysis technique. He then describes the instrument itself and explores topics such as how an interferometer generates a spectrum, optimization of spectral quality, and which tests are used to monitor instrument health.
The book discusses how to properly use spectral processing to increase the information of a spectrum without damaging the data and takes considerable care in instructing on sample preparation, as good sample preparation constitutes half the battle in extracting good data. The final chapters examine single analyte quantitative analysis and conclude with an overview of infrared microscopy.
Drawing on the experience and knowledge of the author as both a professor and practitioner, Fundamentals of Fourier Transform Infrared Spectroscopy offers up-to-date information given in clear, easily understood language to appeal to beginner and expert spectroscopists alike. The author maintains a website and blog with supplemental material. His training course schedule is also available online.
Divided into five chapters, the book starts by giving an introduction to the discovery of active nitrogen, the energy content, and the methods by which this may be produced. The succeeding part deals with light emissions from active nitrogen system. This discussion includes molecular spectrum of nitrogen, emission from atomic energy and condensed active nitrogen, emission from molecular species with electronic energy levels below and above 9.76 eV, and light-emitting systems of active nitrogen.
The next part focuses on theories on active nitrogen. The theories discussed are long-lived Lewis-Rayleigh afterglow and short-lived, energetic afterglows. Numerical representations are provided to test the validity of the theories. Lastly, the discussions end with chemical reactions of active nitrogen. Topics contained in this part are text on recombination of N(4S) atoms; rate constants for reactions presumably induced by direct N(4S) attack; reactions caused by excited nitrogen molecular attack; and mechanism for reactions of active nitrogen that seem to influence direct N(4S) attack.
The book is a valuable source of information for readers interested in the research on active nitrogen.
First published in 1934, Perry's Chemical Engineers' Handbook has equipped generations of engineers and chemists with an expert source of chemical engineering information and data. Now updated to reflect the latest technology and processes of the new millennium, the Eighth Edition of this classic guide provides unsurpassed coverage of every aspect of chemical engineering-from fundamental principles to chemical processes and equipment to new computer applications.
Filled with over 700 detailed illustrations, the Eighth Edition of Perry's Chemcial Engineering Handbook features:Comprehensive tables and charts for unit conversion A greatly expanded section on physical and chemical data New to this edition: the latest advances in distillation, liquid-liquid extraction, reactor modeling, biological processes, biochemical and membrane separation processes, and chemical plant safety practices with accident case histories
Inside This Updated Chemical Engineering GuideConversion Factors and Mathematical Symbols • Physical and Chemical Data • Mathematics • Thermodynamics • Heat and Mass Transfer • Fluid and Particle Dynamics Reaction Kinetics • Process Control • Process Economics • Transport and Storage of Fluids • Heat Transfer Equipment • Psychrometry, Evaporative Cooling, and Solids Drying • Distillation • Gas Absorption and Gas-Liquid System Design • Liquid-Liquid Extraction Operations and Equipment • Adsorption and Ion Exchange • Gas-Solid Operations and Equipment • Liquid-Solid Operations and Equipment • Solid-Solid Operations and Equipment • Size Reduction and Size Enlargement • Handling of Bulk Solids and Packaging of Solids and Liquids • Alternative Separation Processes • And Many Other Topics!
Since the publication of the highly successful first edition of Basic Gas Chromatography, the practice of chromatography has undergone several notable developments. Basic Gas Chromatography, Second Edition covers the latest in the field, giving readers the most up-to-date guide available, while maintaining the first edition's practical, applied approach to the subject and its accessibility to a wide range of readers.
The text provides comprehensive coverage of basic topics in the field, such as stationary phases, packed columns and inlets, capillary columns and inlets, detectors, and qualitative and quantitative analysis. At the same time, the coverage also features key additions and updated topics including:Gas chromatography-mass spectrometry (GC-MS) Sampling methods Multidimensional gas chromatography Fast gas chromatography Gas chromatography analysis of nonvolatile compounds Inverse gas chromatography and pyrolysis gas chromatography
Along with these new and updated topics, the references, resources, and Web sites in Basic Gas Chromatography have been revised to reflect the state of the field. Concise and fundamental in its coverage, Basic Gas Chromatography, Second Edition remains the standard handbook for everyone from undergraduates studying analytical chemistry to working industrial chemists.
Essentials of Chemical Reaction Engineering is a complete yet concise, modern introduction to chemical reaction engineering for undergraduate students. While the classic Elements of Chemical Reaction Engineering, Fourth Edition, is still available, H. Scott Fogler distilled that larger text into this volume of essential topics for undergraduate students.
Fogler’s unique way of presenting the material helps students gain a deep, intuitive understanding of the field’s essentials through reasoning, not memorization. He especially focuses on important new energy and safety issues, ranging from solar and biomass applications to the avoidance of runaway reactions.
Thoroughly classroom tested, this text reflects feedback from hundreds of students at the University of Michigan and other leading universities. It also provides new resources to help students discover how reactors behave in diverse situations.
Coverage includesCrucial safety topics, including ammonium nitrate CSTR explosions, nitroaniline and T2 Laboratories batch reactor runaways, and SAChE/CCPS resources Greater emphasis on safety: following the recommendations of the Chemical Safety Board (CSB) 2 case studies from plant explosions and two homework problems which discuss another explosion. Solar energy conversions: chemical, thermal, and catalytic water spilling Algae production for biomass Mole balances: batch, continuous-flow, and industrial reactors Conversion and reactor sizing: design equations, reactors in series, and more Rate laws and stoichiometry Isothermal reactor design: conversion and molar flow rates Collection and analysis of rate data Multiple reactions: parallel, series, and complex reactions; membrane reactors; and more Reaction mechanisms, pathways, bioreactions, and bioreactors Catalysis and catalytic reactors Nonisothermal reactor design: steady-state energy balance and adiabatic PFR applications Steady-state nonisothermal reactor design: flow reactors with heat exchange
Mathematical methods are provided as design tools, and are often simplified via curve-fitting techniques that are particularly usable by handheld calculators. Useful equations and numerically solved examples, using situations encountered in practice, are supplied. Above all, this volume is a comprehensive and useful reference where the reader can find design rules and principles of high frequency applicators and probes for material processing and sensing applications. Electronic and electrical R&D engineers, physicists, university professors and students will all find this book a valuable reference.
Mehrdad Mehdizadeh is with the DuPont Company, Engineering Research & Technology Division in Wilmington, Delaware. His areas of expertise include high frequency hardware and electromagnetic methods of processing, sensing, and characterization of materials. His work and innovation in industrial, scientific, and medical applications of radio frequency and microwaves has resulted in 19 US patents and a number of publications. He earned his Ph.D. and M.S. from Marquette University (1983, 1980), and a B.S. from Sharif University of Technology (1977), all in electrical engineering. Dr. Mehdizadeh is a Senior Member of the Institute of Electrical and Electronic Engineers (IEEE ), Sigma Xi (Scientific Research Society), the International Microwave Power Institute (IMPI ), and a voting member of IEEE Standard Association.• Books in this area are usually theoretical; this book provides practical information for those who actually intend to design a system
• Features real world and numerically solved examples, and curve-fitted simple equations to replace complex equations provided in typical texts
• Author is a voting member of IEEE Standards Association
This edition includes greatly expanded focus on stem cells, including adult and embryonic stem cells and progenitor populations that may soon lead to new tissue engineering therapies for heart disease, diabetes, and a wide variety of other diseases that afflict humanity. This up-to-date coverage of stem cell biology and other emerging technologies is complemented by a series of new chapters on recent clinical experience in applying tissue engineering. The result is a comprehensive textbook that we believe will be useful to students and experts alike.
New to this edition:
*Includes new chapters on biomaterial-protein interactions, nanocomposite and three-dimensional scaffolds, skin substitutes, spinal cord, vision enhancement, and heart valves
*Expanded coverage of adult and embryonic stem cells of the cardiovascular, hematopoietic, musculoskeletal, nervous, and other organ systems
* The first reference work on named reactions to present colored schemes for easier understanding
* 250 frequently used named reactions are presented in a convenient two-page layout with numerous examples
* An opening list of abbreviations includes both structures and chemical names
* Contains more than 10,000 references grouped by seminal papers, reviews, modifications, and theoretical works
* Appendices list reactions in order of discovery, group by contemporary usage, and provide additional study tools
* Extensive index quickly locates information using words found in text and drawings
* Includes a solid introduction to the simulation of equilibrium processes and the simulation of complex kinetic processes.
* Provides examples of routines that are easily adapted to the processes investigated by the reader
* 'Model-based' analysis (linear and non-linear regression) and 'model-free' analysis are covered
At the outset the text explains the various key terms of thermodynamics with suitable examples and then thoroughly deals with the virial and cubic equations of state by showing the P-V-T (pressure, molar volume and temperature) relation of fluids. It elaborates on the first and second laws of thermodynamics and their applications with the help of numerous engineering examples. The text further discusses the concepts of exergy, standard property changes of chemical reactions, thermodynamic property relations and fugacity. The book also includes detailed discussions on residual and excess properties of mixtures, various activity coefficient models, local composition models, and group contribution methods. In addition, the text focuses on vapour-liquid and other phase equilibrium calculations, and analyzes chemical reaction equilibria and adiabatic reaction temperature for systems with complete and incomplete conversion of reactants.
Includes a large number of fully worked-out examples to help students master the concepts discussed.
Provides well-graded problems with answers at the end of each chapter to test and foster students’ conceptual understanding of the subject. The total number of solved examples and end-chapter exercises in the book are over 600.
Contains chapter summaries that review the major concepts covered.
The book is primarily designed for the undergraduate students of chemical engineering and its related disciplines such as petroleum engineering and polymer engineering. It can also be useful to professionals.
The Solution Manual containing the complete worked-out solutions to chapter-end exercises and problems is available for instructors.
Presenting theoretical knowledge and applied practical considerations, this title
provides an in-depth discussion of recent advances in sterilization
identifies obstacles that may be encountered at any stage of the validation program, and suggests the newest and most advanced solutions
explores distinctive and specific process steps, and identifies critical process control points to reach acceptable results
blends the use of theoretical knowledge with recent technological advancements to achieve applied practical solutions
Includes New and Updated Material
Now in its second edition, this work is the culmination of research and discussions with technical experts, as well as USP and FDA representatives on various topics of interest to the pharmaceutical microbiologist and those responsible for the microbial quality of products, materials, equipment, and manufacturing facilities. New in this edition is an entire chapter dedicated to the topic of biofilms and their impact on pharmaceutical and biopharmaceutical operations. The subject of rapid methods in microbiology has been expanded and includes a discussion on the validation of alternative microbiological methods and a case study on microbial identification in support of a product contamination investigation.
Substantially updated and revised, this book assists readers in understanding the fundamental issues associated with pharmaceutical microbiology and provides them with tools to create effective microbial contamination control and microbial testing programs for the areas under their responsibility.
The text describes the radiation crosslinking of solutions and discusses the electrical conduction of saturated organic polymers. Another topic of interest is the surface tension and density of polyethylene glycol. The section that follows describes the reactivity and comonomer structure of copolymers.
The book will provide valuable insights for chemists, students, and researchers in the field of organic chemistry.
This book is an easy-to-use compendium of problems encountered when using various commonly used analytical techniques. Emphasis is on impurities, by-products, contaminants and other artifacts. A separate entry is provided for each artifact. For specific chemicals, this entry provides the common name, mass spectrum, gas chromatographic data, CAS name and registry number, synonyms and a narrative discussion. More than 1100 entries are included. Mass spectral data are indexed in a 6-peak index (molecular ion, base peak, second peak, third peak) and there are also formula, author and subject indexes. An extensive bibliography contains complete literature citations.
The book is designed to be used. It will not only allow experienced analysts to profit from the mistakes of others, but it will also be invaluable to other scientists who use analytical instruments in their work.
Searching for the best laboratory instruments and systems can be a daunting and expensive task. A poorly selected instrument can dramatically affect results produced and indirectly affect research papers, the quality of student training, and an investigator's chances for advancement. Buying and Selling Laboratory Instruments offers the valuable insights of an analytical chemist and consultant with over four decades of experience in locating instruments based upon both need and price. It helps all decision makers find the best equipment, service, and support while avoiding the brand-loyalty bias of sales representatives so you can fully meet your laboratory's requirements.
The first section of the book guides buyers through the hurdles of funding, purchasing, and acquiring best-fit instruments at the least-expensive price. It explains how to find vendors that support their customers with both knowledgeable service and application support. Also offered is guidance on adapting your existing instruments to new applications, integrating new equipment, and what to do with instruments that can no longer serve in research mode.
The second section explains the sales process in detail. This is provided both as a warning against manipulative sales reps and as a guide to making the sale a win-win process for you and your vendor. It also shows you how to select a knowledgeable technical guru to help determine the exact system configuration you need and where to find the best price for it. Added bonuses are summary figures of buying sequence and sales tools and an appendix containing frequently asked questions and memory aids.
Buying and Selling Laboratory Instruments is for people directly involved in selecting and buying instruments for operational laboratories, from the principle investigator to the person actually delegated with investigating and selecting the system to be acquired. Sales representatives; laboratory managers; universities; pharmaceutical, biotech, and forensic research firms; corporate laboratories; graduate and postdoctoral students; and principle investigators will not want to be without this indispensible guide.
Designed to be completed in one semester, this text enables students to fully grasp and apply the core concepts of analytical chemistry and aqueous chemical equilibria. Moreover, the text enables readers to master common instrumental methods to perform a broad range of quantitative analyses. Author Brian Tissue has written and structured the text so that readers progressively build their knowledge, beginning with the most fundamental concepts and then continually applying these concepts as they advance to more sophisticated theories and applications.
Basics of Analytical Chemistry and Chemical Equilibria is clearly written and easy to follow, with plenty of examples to help readers better understand both concepts and applications. In addition, there are several pedagogical features that enhance the learning experience, including:Emphasis on correct IUPAC terminology "You-Try-It" spreadsheets throughout the text, challenging readers to apply their newfound knowledge and skills Online tutorials to build readers' skills and assist them in working with the text's spreadsheets Links to analytical methods and instrument suppliers Figures illustrating principles of analytical chemistry and chemical equilibria End-of-chapter exercises
Basics of Analytical Chemistry and Chemical Equilibria is written for undergraduate students who have completed a basic course in general chemistry. In addition to chemistry students, this text provides an essential foundation in analytical chemistry needed by students and practitioners in biochemistry, environmental science, chemical engineering, materials science, nutrition, agriculture, and the life sciences.
This book guides the reader through the mathematics, physics and practical techniques needed to use telescopes (from small amateur models to the larger instruments installed in many colleges) and to observe objects in the sky. Mathematics to around Advanced Placement standard (US) or A level (UK) is assumed, although High School Diploma (US) or GCSE-level (UK) mathematics plus some basic trigonometry will suffice most of the time. Most of the physics and engineering involved is described fully and requires no prior knowledge or experience.
This is a ‘how to’ book that provides the knowledge and background required to understand how and why telescopes work. Equipped with the techniques discussed in this book, the observer will be able to operate with confidence his or her telescope and to optimize its performance for a particular purpose. In principle the observer could calculate his or her own predictions of planetary positions (ephemerides), but more realistically the observer will be able to understand the published data lists properly instead of just treating them as ‘recipes.’ When the observer has obtained measurements, he/she will be able to analyze them in a scientific manner and to understand the significance and meaning of the results.
“Telescopes and Techniques, 3rd Edition” fills a niche at the start of an undergraduate astronomer’s university studies, as shown by it having been widely adopted as a set textbook. This third edition is now needed to update its material with the many new observing developments and study areas that have come into prominence since it was published. The book concentrates on the knowledge needed to understand how small(ish) optical telescopes function, their main designs and how to set them up, plus introducing the reader to the many ways in which objects in the sky change their positions and how they may be observed. Both visual and electronic imaging techniques are covered, together with an introduction to how data (measurements) should be processed and analyzed. A simple introduction to radio telescopes is also included. Brief coverage of the most advanced topics of photometry and spectroscopy are included, but mainly to enable the reader to see some of the developments possible from the basic observing techniques covered in the main parts of the book.
The text covers topics such as: the transport of momentum; the transport of energy and the transport of chemical species. The organization of the material is similar to Bird/Stewart/Lightfoot, but presentation has been thoughtfully revised specifically for undergraduate students encountering these concepts for the first time.
Devoting more space to mathematical derivations and providing fuller explanations of mathematical developmentsincluding a section of the appendix devoted to mathematical topicsallows students to comprehend transport phenomena concepts at an undergraduate level.
The seventh edition is restructured into three parts: Basic Concepts, Nuclear Power (including new chapters on nuclear power plants and introduction to reactor theory), and Radiation and Its Uses. Part Two in particular has been updated with current developments, including a new section on Reactor Safety and Security (with a discussion of the Fukushima Diiachi accident); updated information on naval and space propulsion; and revised and updated information on radioactive waste storage, transportation, and disposal. Part Three features new content on biological effects of radiation, radiation standards, and radiation detection.Coverage of energy economics integrated into appropriate chaptersMore worked examples and end of chapter exercisesUpdated final chapter on nuclear explosions for current geopolitical developments
CMOS Processors and Memories is divided into two parts: processors and memories. In the first part we start with high performance, low power processor design, followed by a chapter on multi-core processing. They both represent state-of-the-art concepts in current computing industry. The third chapter deals with asynchronous design that still carries lots of promise for future computing needs. At the end we present a “hardware design space exploration” methodology for implementing and analyzing the hardware for the Bayesian inference framework. This particular methodology involves: analyzing the computational cost and exploring candidate hardware components, proposing various custom architectures using both traditional CMOS and hybrid nanotechnology CMOL. The first part concludes with hybrid CMOS-Nano architectures.
The second, memory part covers state-of-the-art SRAM, DRAM, and flash memories as well as emerging device concepts. Semiconductor memory is a good example of the full custom design that applies various analog and logic circuits to utilize the memory cell’s device physics. Critical physical effects that include tunneling, hot electron injection, charge trapping (Flash memory) are discussed in detail. Emerging memories like FRAM, PRAM and ReRAM that depend on magnetization, electron spin alignment, ferroelectric effect, built-in potential well, quantum effects, and thermal melting are also described.
CMOS Processors and Memories is a must for anyone serious about circuit design for future computing technologies. The book is written by top notch international experts in industry and academia. It can be used in graduate course curriculum.
The book covers important topics, such as clean fuels, gasification, biofuels, and environmental impact of refining, which are not commonly discussed in most refinery textbooks. Throughout the source, problem sets and examples are given to help the reader practice and apply the fundamental principles of refining. Chapters 1-10 can be used as core materials for teaching undergraduate courses. The first two chapters present an introduction to the petroleum refining industry and then focus on feedstocks and products. Thermophysical properties of crude oils and petroleum fractions, including processes of atmospheric and vacuum distillations, are discussed in Chapters 3 and 4. Conversion processes, product blending, and alkylation are covered in chapters 5-10. The remaining chapters discuss hydrogen production, clean fuel production, refining economics and safety, acid gas treatment and removal, and methods for environmental and effluent treatments.
This source can serve both professionals and students (on undergraduate and graduate levels) of Chemical and Petroleum Engineering, Chemistry, and Chemical Technology. Beginners in the engineering field, specifically in the oil and gas industry, may also find this book invaluable.Provides balanced coverage of fundamental and operational topicsIncludes spreadsheets and process simulators for showing trends and simulation case studiesRelates processing to planning and management to give an integrated picture of refining
Topics covered in the handbook include:Processes to enhance productionWell modification to maximize oil and gas recoveryCompletion and evaluation of wells, well testing, and well surveys
Reservoir Engineering Handbook, Fourth Edition provides solid information and insight for engineers and students alike on maximizing production from a field in order to obtain the best possible economic return. With this handbook, professionals will find a valuable reference for understanding the key relationships among the different operating variables. Examples contained in this reference demonstrate the performance of processes under forceful conditions through a wide variety of applications.
• Fundamental for the advancement of reservoir engineering concepts
• Step-by-step field performance calculations
• Easy to understand analysis of oil recovery mechanisms
• Step-by-step analysis of oil recovery mechanisms
• New chapter on fractured reservoirs
Why This Title
This title is written in a clear and logical manner that is accessible to environmental professionals of all disciplines. It contains hundreds of practical tips on planning, sampling, and interactions with analytical laboratories. Having this text as a desk reference will greatly improve skills in planning and sampling, and elevate understanding of chemical data to a new level.
This topic is of importance to a wide range of environmental professionals from a variety of disciplines (see audience). Written by a practicing professional for practicing professionals, this handbook provides everything an environmental professional needs to know to competently collect environmental chemical data.
The book is supported by detailed, proven and effective commission templates, plus extensive commissioning scenarios that enable the reader to learn the context of good commissioning practice from an experienced commissioning manager. It focuses on the critical safety assessment and inspection regimes necessary to ensure that new plants are compliant with OSHA and environmental requirements. Martin Killcross has brought together the theory of textbooks and technical information obtained from sales literature, in order to provide engineers with what they need to know before initiating talks with vendors regarding equipment selection.Unique information from a respected, global commissioning manager: delivers the know-how to succeed for anyone commissioning new plant or equipmentComes with online commissioning process templates that make this title a working tool kit as well as a key reference Extensive examples of successful commissioning processes with step-by-step guidance enable readers to understand the function and performance of the wide range of tasks required in the commissioning process
Water Insolubility is the Primary Culprit in over 40% of New Drug Development Failures
The most comprehensive resource on the topic, this second edition of Water Insoluble Drug Formulation brings together a distinguished team of experts to provide the scientific background and step-by-step guidance needed to deal with solubility issues in drug development. Twenty-three chapters systematically describe solubility properties and their impact on formulation, from theory to industrial practice. With detailed discussion on how these properties contribute to solubilization and dissolution, the text also features six brand new chapters on water-insoluble drugs, exploring regulatory aspects, pharmacokinetic behavior, early phase formulation strategies, lipid based systems for oral delivery, modified release of insoluble drugs, and scalable manufacturing aspects. The book includes more than 15 water-insoluble drug delivery systems or technologies, illustrated with case studies featuring oral and parenteral applications. Highlighting the most current information and data available, this seminal volume reflects the significant progress that has been made in nearly all aspects of this field.
Applicable to a broad range of technicians and industries and fully updated throughout, A Working Guide to Process Equipment, Fourth Edition, explains how to diagnose, troubleshoot, and correct problems with chemical and petroleum refining process equipment. Nine new chapters cover:Tray design details Shell-and-tube heat exchanger design details Relief valve system design Vapor lock and exchanger flooding in steam systems Steam generation operating and design details Wastewater strippers Thermodynamics -- how it applies to process equipment Centrifugal pumps -- reducing seal and bearing failures Hand calculations for distillation towers Vapor -- liquid equilibrium, absorption, and stripping calculations
Filled with examples and illustrations, this practical resource demonstrates how theory applies to solving real-world plant operation problems. Selected hand calculation methods are also provided.
Comprehensive coverage includes:
Distillation Tower Trays * Tower Pressure Control * Distillation Towers * Reboilers * Tower Internals * Instruments * Packed Towers * Steam and Condensate Systems * Bubble Point and Dew Point * Steam Strippers * Draw-Off Nozzle Hydraulics * Pumparounds and Tower Heat Flows * Condensers and Tower Pressure Control * Air Coolers * Deaerators and Steam Systems * Steam Generation * Wastewater Strippers * Vacuum Systems * Steam Turbines * Surface Condensers * Shell-and-Tube Heat Exchangers * Fired Heaters * Refrigeration Systems * Cooling Water Systems * Catalytic Effects * Centrifugal Pumps * Control Valves * Separators * Centrifugal Compressors and Surge * Reciprocating Compressors * Corrosion * Fluid Flow in Pipes * Super-Fractionation Stage * Computer Control * Field Troubleshooting
Thermonuclear pumping; Throughput; Transmission probability; Electronic circuit simulation; Sorption on charcoal; Desorption from porous materials; Desorption from stainless steel, A1 alloys (outgassing rates); Ion bombardment (glow discharge) cleaning; Clay - type pumps; Turbomolecular pumps-improvements; Cryosorption; NEG (Nonevaporable getter) linear pumps; Standards for measurement of pumping speed (Recommended practice, test domes); Spinning rotor gauges; Quartz friction gauges; Increase of sensitivity of thermocouple gauges; Lubrication in vacuum; Calibration of diffusion leaks; Improvements in leak detection.
Besides its role in educational activities, the book will also serve as a handbook for those working in this field, or in fields connected to Vacuum Technology.Comments from the press on the second edition:"A valuable reference work for undergraduate libraries...well organized and clearly written and strikes an appropriate balance between completeness and attention to fundamentals. The index and references are unusually complete. Recommended." (Choice)
"Roth's new book contains a comprehensive collection of information on rarefied-gas flow, physical and chemical phenomena associated with vacuum technology, the production and measurement of high vacuum and sealing and leak-detection techniques. One finds a wealth of equations, numerical examples, tables, graphs and monographs. The book is more a handbook than a source book of latest developments. It is suitable for teaching, but the wealth of organized data should also make the book highly useful to engineers..." (Physics Today)
Now in its 5th Edition, the highly acclaimed Principles of Food Sanitation provides sanitation information needed to ensure hygienic practices and safe food for food industry personnel as well as students. The highly acclaimed textbook and reference addresses the principles related to contamination, cleaning compounds, sanitizers, cleaning equipment. It also presents specific directions for applying these concepts to attain hygienic conditions in food processing or food preparation operations.
New features in this edition include:
A new chapter on the concerns about biosecurity and food sanitation
Updated chapters on the fundamentals of food sanitation, contamination sources and hygiene, Hazard Analysis Critical Control Points, cleaning and sanitizing equipment, and waste handling disposal
Comprehensive and concise discussion about sanitation of low-, intermediate-, and high-moisture foods
* Covers the technologies and operations of petroleum refineries
* Provides material on operating a jointly owned and operated refinery
* Gives readers a comprehensive introduction to petroleum refining, as well as a full reference to engineers in the field
Bisesi and Kohn's Industrial Hygiene Evaluation Methods, Second Edition introduces basic methods for evaluating work and some non-work environments in order to detect and measure physical, chemical and biological agents, as well as hazardous ergonomic factors. The book is divided into relatively short units that provide concise overviews and descriptions of basic concepts. Each unit is followed by practical technical exercises. These exercises foster the understanding of basic industrial hygiene principles and practices for collection, detection, identification, calculation, and interpretation of qualitative and quantitative data. Exercises can be conducted in a setting in which agents and other factors are detectable and measurable. Alternatively, the simulated evaluation exercises that are included can be conducted in a classroom or laboratory.
This book is an introductory reference for environmental and occupational health and safety students and practitioners. It is an indispensable tool that illustrates methods fundamental to industrial hygiene practice, and is just as valuable in the professional's office as it is in the classroom.
Filling the void, Biotechnology Operations: Principles and Practices reflects this integrative philosophy, serving as a practical guide for students, professionals, or anyone else with interests in the biotech industry. Although many books emphasize specific technical aspects of biotech, this is perhaps the first to integrate essential concepts of product development and scientific and management skills with the seven functional areas of biotechnology:
Biomanufacturing Clinical trials Nonclinical studies Project management Quality assurance Quality control Regulatory affairs
A practical roadmap to optimizing biotechnology operations, this reference illustrates how to use specific product planning, design, and project management processes to seamlessly merge plans and efforts in the key functional areas. Applying lessons learned throughout the nascent history of biotech, author Michael Roy highlights developmental principles that could bring future products to market more safely and efficiently. Drawing from his experiences working in industry and teaching a graduate course at the University of Wisconsin, this hotly anticipated book clarifies basic methodologies and practices to help reduce risks and resolve problems as future technological discoveries are developed into tangible products.
This book provides an understanding of the microbial challenges to the safety of low aw foods, and a historic backdrop to the paradigm shift now highlighting low aw foods as vehicles for foodborne pathogens. Up-to-date facts and figures of foodborne illness outbreaks and product recalls are included. Special attention is given to the uncanny ability of Salmonella to persist under dry conditions in food processing plants and foods. A section is dedicated specifically to processing plant investigations, providing practical approaches to determining sources of persistent bacterial strains in the industrial food processing environment. Readers are guided through dry cleaning, wet cleaning and alternatives to processing plant hygiene and sanitation. Separate chapters are devoted to low aw food commodities of interest including spices, dried dairy-based products, low aw meat products, dried ready-to-eat cereal products, powdered infant formula, nuts and nut pastes, flours and meals, chocolate and confectionary, dried teas and herbs, and pet foods. The book provides regulatory testing guidelines and recommendations as well as guidance through methodological and sampling challenges to testing spices and low aw foods for the presence of foodborne pathogens. Chapters also address decontamination processes for low aw foods, including heat, steam, irradiation, microwave, and alternative energy-based treatments.