This Standard specifies the technical requirements, test method, marks, labels, instructions, packaging, transportation, and storage of the hepatitis B virus surface antigen (HBsAg) detection reagent (kit) (chemiluminescent immunoassay).

This Standard specifies the classification, technical requirements, testing methods, inspection rules, packing requirements and the recommended fitting program of the rigid gas permeable contact lenses for orthokeratology.

This Standard specifies the terms and definitions, general requirements, safety requirements, warning signs, test methods, inspection rules and marking, instructions for use, packaging, transport and storage of children.

This Part of YY 0326 specifies the requirements for containers for plasma used together with hemostix specified in YY 0328, plasma tubing specified in YY 0326.2 and plasma centrifuge bowl specified in YY 0326.1. The plasma collected and stored in containers for plasma specified in this Part is used to prepare blood products. It cannot be used for clinical blood transfusion.

This Standard specifies the term and definition, requirements, test methods, symbols, labels and instructions, packing, transportation, and storage of D-Dimer quantitative detection reagent (kit).

This document provides the comprehensive list of Chinese Industry Standards - Category: JB; JB/T; JBT.

This Standard specifies the basic dimension, technical requirements, test methods, inspection rules, marks, packaging, transportation, and storage of bottle caps which are for beverages such as beer and soft drinks, and which are made of electro-tinned (or electro-chromed) tinplate. This Standard applies to the bottle cap for sealing which complies with GB 10809.

In order to standardize the design of electrical instillations in explosive atmosphere, make electrical installations in explosive atmosphere follow the policies of prevention first, guarantee the personal and property safety and take preventive measures according to circumstances, this Code is hereby developed.

This Standard specifies the dimensions, technical requirements and designation of hexagon nuts, style 1 - fine pitch thread.

This Standard specifies the arrangement of the sampling points for measuring the volatile organic compounds and carbonyl compounds in crew cabin of motor vehicles, sampling environment condition and technical requirements, sampling method and equipment, corresponding measurement method and equipment, data processing, quality assurance etc.

This Standard applies to electric vehicle supply equipment for EV charging, including AC charging points, off-board charger, EV conductive charging connectors, etc., with max rated voltage of power supply of 1000V AC or 1500V DC, and max rated output voltage of 1000V AC or 1500V DC.

This Standard specifies the classification and specification of pressure vessel flanges, the materials of flanges, studs and nuts, and their matching with the gaskets. This Standard also specifies the maximum allowable working pressure, technical requirements and marking at all temperature levels.

This Standard specifies terms and definitions, basic requirements, technical contents and testing methods of environmental labeling products - wood based panels and finishing products. This Standard applies to wood based panels, floor boards, wall boards and other products.

This standard specifies the types and limits of baneful elements in adornment. This standard is applicable to the adornment made of various materials (excluding gems).

This part of GB 15763 specifies the classification, technical requirements, test methods and inspection rules of the tempered glass which is used in building and is fabricated by heat treatment process. This part of GB 15763 is applicable to the tempered glass which is used in building and is fabricated by heat treatment process. As for tempered glasses for other purposes other than building (such as industrial equipment, furniture, etc.), if there is no corresponding product standard, this standard may be adopted by reference according to their product features.

This Standard applies to the manufacture and acceptance of 12-spline flange nut and 12 point flange nut (hereinafter referred to as bolt and nut respectively) that are used for gas turbine power plant.

This Standard specifies the energy efficiency grades, energy efficiency limits, evaluation values of energy conservation, and test methods of double-capped fluorescent lamps for general lighting service (Hereinafter referred to as: double-capped fluorescent lamps). This Standard applies to the following two operating types of lamps: preheating cathode lamp that can work in AC power supply frequency lines with starter, and can work in high frequency lines; and preheating cathode lamp that can work in high frequency lines.

This Part specifies the terms and definitions, general provisions, requirements, test methods, inspection rules, marking, packaging, transportation and storage of heat soaked thermally tempered glass for building. This Part of GB15763 applies to heat soaked thermally tempered glass in building. For those heat soaked thermally tempered glass not-used in building (e.g. industrial equipment, furniture, etc.), this standard may be served as reference if there is no corresponding product standard.

The standard specifies the in-service vehicle / engine conformity requirements of automobile equipped with compression ignition engine and its compression ignition engine, the spark ignition engine automobile and its spark ignition engine with NG or LPG as fuel. This standard applies to the in-service vehicle / engine conformity inspection of M2, M3, N1, N2 and N3 classes of vehicles whose designing speed are larger than 25km/h; and M1 class vehicle equipped with compression ignition engines (including gas fuelled positive ignition type) and its automobile whose total mass is larger than 3500kg. If the N1 and M2 classes of vehicles equipped with compression ignition engines (including gas fuelled positive ignition type) engine have been conducted the conformity inspection of in-service vehicle according to the standards of GB 18352.3-2005 Limits and Measurement Methods for Light Car Pollutant Emission (China III, IV stage), it does not have to perform this standard.

This part specifies the terms and definitions, classification, material, requirements, test methods and inspection rules of laminated glass in building. This part is applicable to the laminated glass in building.

This Standard deals with the safety of toys that have at least one function dependent on electricity. Additional requirements for experimental toys are given in Annex A. Toys using electricity for secondary functions are within the scope of this Standard. In order to comply with this Standard, electric toys must also comply with Annex A in GB 6675-2003, because it covers the hazard which is different from the hazard caused by the use of electricity. .

GBT 14048.10-2008 applies to inductive and capacitive proximity switches that sense the presence of metallic and/or non-metallic objects; ultrasonic proximity switches that sense the presence of sound reflecting objects; photoelectric proximity switches that sense the presence of objects; and non-mechanical magnetic proximity switches that sense the presence of objects with a magnetic field. These proximity switches are self-contained; have semiconductor switching elements(s); and are intended to be connected to circuits. The rated voltage of proximity switch shall not exceed 250V (50Hz/60Hz) a.c. or 300V d.c. This Part is not intended to cover proximity switches with analogue outputs.

This Standard applies to electronic apparatus designed to be powered from grid power supply, from power supply equipment, from battery or from remote power system and intended for reception, generation, recording or reproduction of audio, video and relevant signals. It also applies to apparatus designed to be used exclusively in combination with the above-mentioned apparatus. This Standard primarily applies to the apparatus intended for household and similar general use but which may also be used in places of public locations such as schools, theatres, places of worship and the workplace. PROFESSIONAL APPARATUS intended for use as described above is also covered unless it is specifically within the scope of other standards. This Standard only applies to safety aspects of the above apparatus; it does not apply to other matters, such as style or performance. If above apparatus is designed to be connected to TELECOMMUNICATION NETWORK or similar network, for example by means of an integrated modem, this Standard also applies.

This Standard specifies the manual sampling and determination of particulate and gaseous pollutants monitoring methods in smoke flue, chimney, vent emission funnel and other fixed pollutant sources; and monitoring methods of the portable instruments. It formulated corresponding provisions on the preparation for emission monitoring of stationary source, determination of exhaust emission parameter, sampling and determination method of particulates and gaseous pollutant in exhaust, and the quality assurance of monitoring etc. This Standard applies to the environmental monitor stations at all levels, industry and enterprise professional organizations, and environmental scientific research institutes, to carry out the emission monitoring of exhaust pollutants of stationary source; environmental protection acceptance monitoring upon the completion of construction project; monitoring on the control effect of pollution treatment facilities; verification monitoring on continuous emission monitoring system; and the technical research monitoring of clean production process and pollution prevention.

This Standard specifies the energy efficiency grades, minimum allowable values of energy efficiency, evaluating values of energy conservation and test methods FOR line-start three-phase permanent-magnet synchronous motor, elevator permanent-magnet synchronous motor, and permanent-magnet synchronous motor driven by variable frequency equipment (Hereinafter together referred as: Permanent-magnet synchronous motor). This Standard applies to line-start three-phase permanent-magnet synchronous motor WORKING under three-phase AC power supply with voltage of 1140 V and below, 50 Hz, rated at 0.55 kW - 375 kW, Number of poles 2-pole, 4-pole, 6-pole, 8-pole, 10-pole, 12-pole and 16-pole, single-speed enclosed fan-cooled, continuous duty; elevator permanent-magnet synchronous motor WORKING under voltage of 1000 V and below, variable frequency power supply, rated power of 0.55 kW - 110 kW; permanent-magnet synchronous motor driven by variable frequency equipment WORKING under voltage of 1000 V and below, variable frequency power supply, rated power of 0.55 kW - 90 kW.

This Standard regulates the technical standard for constitution, installation, debugging, trail running and the acceptance of particles (PM10 and PM2.5) of the ambient air continuous automated monitoring system. This Standard is applicable for the installation and acceptance for the ambient air quality continuous automated monitoring system for PM10 and PM2.5.

This Standard specifies classification scheme and calculation methods of ambient air quality index, ambient air quality levels and categories, requirements of publishing content of daily report and real-time report, publishing formats and other relevant information of ambient air quality index. This Standard applies to ambient air quality index.

This technical specification specifies the technical performance requirements and performance test methods of water quality automatic analyzer of electroconductivity in respect of surface water, industrial wastewater and municipal wastewater. It is applicable to the design, manufacturing, and performance test of this kind of instruments.

This document provides the comprehensive list of Chinese Industry Standards - Category: HJ; HJ/T; HJT.

This Standard specifies technical requirements for quality assurance and quality control of sampling and testing in the process of manually monitoring and comparison monitoring of This Standard specifies technical requirements for quality assurance and quality control of sampling and testing in the process of manually monitoring and comparison monitoring of waste water discharge and exhaust emission of stationary pollution source. This Standard applies to the environmental monitoring of waste water discharge and exhaust emission of stationary pollution sources.

This Standard specifies the technical requirements for cement kiln facilities for co-processing solid wastes, property requirements of wastes entering the kiln, technical requirements for operation, emission limit of pollutants, control requirements, monitoring, supervision and management requirements for pollutants caused by cement products manufactured. This Standard is applicable to the pollution control, supervision and management during the process of co-processing hazardous wastes, household wastes, sludge caused by urban and industrial wastewater treatment, processing waste of animals and plants, polluted soil, emergency wastes and other solid wastes using cement kiln. When using cement kiln to co-process household wastes, if the mass of household wastes added exceeds 30% of the total mass of kiln (furnace) materials, the Standard for Pollution Control on the Municipal Solid Waste Incineration shall be executed. This Standard applies to the behavior of pollutants emission allowed by law. Site selection of newly established pollution source and management of existing pollution source within the special protection zone shall be executed in accordance with relevant provisions of Law of the Peoples Republic of China on the Prevention and Control of Atmospheric Pollution, Law of the Peoples Republic of China on the Prevention and Control of Water Pollution, Marine Environment Protection Law of the Peoples Republic of China, Law of the People.

This Standard specifies the terms and definitions, classification and designation, requirements, test methods, inspection rules, marking, packaging, storage and transport of polyvinyl chloride plastic waterproofing sheets.

This standard specifies the salicylic acid spectrophotometry to determine ammonia nitrogen in water. This standard applies to determination of ammonia nitrogen in groundwater, surface water, domestic sewage, and industrial wastewater. When the sample volume is 8.0 ml and the 10 mm cuvette is used, the detection limit of this method is 0.01 mg/L, the determination lower limit is 0.04mg/L, and the determination upper limit is1.0mg/L (all counted in N). When the sample volume is 8.0 ml and the 30mm cuvette is used, the detection limit of this method is 0.004 mg/L, the determination lower limit is 0.016mg/L, and the determination upper limit is 0.25mg/L (all counted in N).

This Standard specifies ion chromatography method that determines adsorbable organic halogen (AOX) in water.

This Standard specifies the requirements for cold light sources. This Standard applies to cold light sources which are used as a function of supply device in endoscope inspection and surgery, other cold light sources can selectively adopt this document according to the applicability.

This Part of GB/T 16886 describes: The general principles governing the biological evaluation of medical devices within a risk management process; The general classification of devices based on the nature and duration of their contact with the body; The evaluation of existing relevant data from all sources; The identification of additional data sets necessary to analyze the biological safety of the medical device; The assessment of the biological safety of the medical device. This Part does not cover trial of materials and devices that do not come into direct or indirect contact with the patient.

This Standard specifies the classification, basic parameters, requirements, test methods, inspection rules, marks, packaging, storage and transportation of biological microscope products. This Standard applies to various types of biological microscopes, observed in visible light, with mechanical tube length of 160 mm or infinite. This Standard applies to various types of biological microscopes that adopt photography and video technology to perform the image viewing and processing.

This code is formulated with a view to making the design of general hospital meet the standard and the functional need of medical service and being in conformity with the standards of being safe, hygienic, economical, applicable, energy saving and environmental-friendly.

This Standard specifies air cleaner terms and definitions, model and naming method, requirements, test methods, inspection rues, marks, instructions for use, package, transportation and storage.

HJT 76-2007 specifies CEMS.

This Part of GB/T 17626 relates to the immunity of the electrical and electronic equipment to repetitive electronic fast transients. It gives immunity requirements and test procedures related to electrical fast transients/bursts. It additionally defines ranges of test levels and establishes test procedures. The objective of this Standard is to establish a common and reproducible basis for evaluating the performance of electrical and electronic equipment when subjected to repetitive fast transients (bursts) on supply, signal and control ports. The test method documented in this Part of IEC 61000-4 describes a consistent method to assess the immunity of an equipment or system against a defined phenomenon.

This Part of GB/T 17626 relates to the immunity requirements, test methods, and range of recommended test levels for equipment to unidirectional surges caused by overvoltage from switching and lightning transients. Several test levels which relate to different environment and installation conditions are defined. These requirements are developed for and are applicable to electrical and electronic equipment. The objective of this Standard is to establish a common reference for evaluating the immunity of electrical and electronic equipment when subjected to surges. The test method documented in this Part describes a consistent method to assess the immunity of an equipment or system against a defined phenomenon.

This Part of GB/T 17626 defines the immunity test methods and range of preferred test levels for electrical and electronic equipment connected to low-voltage power supply networks for voltage dips, short interruptions, and voltage variations. This Standard applies to electrical and electronic equipment having a rated input current not exceeding 16 A per phase, for connection to 50 Hz or 60 Hz a.c. networks. It does not apply to electrical and electronic equipment for connection to 400 Hz a.c. networks. Tests for these networks will be covered by future IEC standards. The objective of this Standard is to establish a common reference for evaluating the immunity of electrical and electronic equipment when subjected to voltage dips, short interruptions and voltage variations.

This Standard specifies the test methods of candy.

This Standard relates to the conducted immunity requirements of electrical and electronic equipment to electromagnetic disturbances coming from intended radio-frequency (RF) transmitters in the frequency range 9 kHz up to 80 MHz. Equipment not having at least one conducting cable (such as mains supply, signal line or earth connection), which can couple the equipment to the disturbing RF fields is excluded. This Standard does not intend to specify the tests to be applied to particular apparatus or systems. Its main aim is to give a general basic reference to all concerned product committees of the IEC. The product committees (or users and manufacturers of equipment) remain responsible for the appropriate choice of the test and the severity level to be applied to their equipment.

This Standard specifies the technical requirements, test methods, reliability test, marking and packing for fixed automatic telephone sets.

This Standard specifies the requirements of electromagnetic compatibility (EMC) for 800 MHz CDMA digital cellular mobile telecommunication system: MS and ancillary equipment that receive and transmit voice and/or data, including measurement methods, frequency range, limits and performance criteria etc. This Standard is not only applicable to portable and vehicle-mounted mobile stations but also to those powered by AC and used at fixed locations.

This Standard is applicable to mains-powered or battery-powered information technology equipment, including electrical business equipment and associated equipment, with a RATED VOLTAGE not exceeding 600 V. This Standard is also applicable to such information technology equipment: designed for use as telecommunication terminal equipment and TELECOMMUNICATION NETWORK infrastructure equipment, regardless of the source of power; designed to use the AC MAINS SUPPLY as a communication transmission medium. This Standard specifies requirements intended to reduce risks of fire, electric shock or injury for the OPERATOR and layman who may come into contact with the equipment and, where specifically stated, for a SERVICE PERSON. This Standard is intended to reduce such risks with respect to installed equipment, whether it consists of a system of interconnected units or independent units, subject to installing, operating and maintaining the equipment in the manner prescribed by the manufacturer.

This document provides the comprehensive list of Chinese National Standards - Category: GB; GB/T, GBT.

This technical guiding document provides the general guidelines of determining the environment-friendly use period of electronic information products that contain toxic and hazardous substances or elements. The content of this technical guiding document applies to the electronic information products within the adjustment range of "Pollution Control and Management Methods of Electronic Information Products", and in which the content of toxic and hazardous substances or elements exceeds the limit requirements specified in SJ/T 11363-2006.

A manifesto for a radically different philosophy and practice of manufacture and environmentalism

"Reduce, reuse, recycle" urge environmentalists; in other words, do more with less in order to minimize damage. But as this provocative, visionary book argues, this approach perpetuates a one-way, "cradle to grave" manufacturing model that dates to the Industrial Revolution and casts off as much as 90 percent of the materials it uses as waste, much of it toxic. Why not challenge the notion that human industry must inevitably damage the natural world?

In fact, why not take nature itself as our model? A tree produces thousands of blossoms in order to create another tree, yet we do not consider its abundance wasteful but safe, beautiful, and highly effective; hence, "waste equals food" is the first principle the book sets forth. Products might be designed so that, after their useful life, they provide nourishment for something new-either as "biological nutrients" that safely re-enter the environment or as "technical nutrients" that circulate within closed-loop industrial cycles, without being "downcycled" into low-grade uses (as most "recyclables" now are).

Elaborating their principles from experience (re)designing everything from carpeting to corporate campuses, William McDonough and Michael Braungart make an exciting and viable case for change.

3D Robotics co-founder and bestselling author Chris Anderson takes you to the front lines of a new industrial revolution as today’s entrepreneurs, using open source design and 3-D printing, bring manufacturing to the desktop. 

In an age of custom-fabricated, do-it-yourself product design and creation, the collective potential of a million garage tinkerers and enthusiasts is about to be unleashed, driving a resurgence of American manufacturing.  A generation of “Makers” using the Web’s innovation model will help drive the next big wave in the global economy, as the new technologies of digital design and rapid prototyping gives everyone the power to invent--creating “the long tail of things”.

★★★★★LEARNING STARTS WITH VIEWING THE WORLD DIFFERENTLY. ★★★★★

Knowledge flow - A mobile learning platform provides Apps and Books.

Knowledge flow provides learning book of Basics of Automobile Engineering. This book of automobile engineering brings the functional and constructional working of automobiles. This book is for all engineering students and professional across the world.

Contents:

1. Introduction to Automobile Engineering

2. Chassis

3. Front axle beam and Stub axle

4. Wheel alignment

5. Camber, Castor and King Pin inclination

6. Steering gear

7. Transmission system

8. Clutch and Clutch Plate

9. Fluid coupling

10. Propeller shaft

11. Suspension system

12. Rigid axle and independent suspension system

13. Leaf Spring and Coil Spring

14. Brakes

15. Drum and Disc Brakes

To find more education books, visit here http://knowledgeflow.in/books.

Every lean practitioner occasionally wishes for a simple, fun, and quick-read introduction to lean thinking to give acquaintances, associates, and family members -- even to our kids. If lean thinking often entails unlearning a plethora of bad habits, wouldn't it better if we learned better thinking -- and habits -- from the beginning? Everything I Know About Lean I Learned in First Grade is just that sort of book. It brings lean back to its original simplicity by showing how lean is alive in a first grade classroom. The book connects common lean tools to the broader lean journey, shows how to identify and eliminate waste, and aids the reader in seeing lean for what it truly is: a way to create a learning and problem- solving culture. Written to educate the entire organization on the fundamentals of lean thinking, this is the perfect source to engage all team members at all levels of an organization. Originally self-published in 2008, LEI is proud to re-issue this book and make it available to the broader lean community.

In recent years, stories of reckless lawyers and greedy citizens have given the legal system, and victims in general, a bad name. Many Americans have come to believe that we live in the land of the litigious, where frivolous lawsuits and absurdly high settlements reign.

Scholars have argued for years that this common view of the depraved ruin of our civil legal system is a myth, but their research and statistics rarely make the news. William Haltom and Michael McCann here persuasively show how popularized distorted understandings of tort litigation (or tort tales) have been perpetuated by the mass media and reform proponents. Distorting the Law lays bare how media coverage has sensationalized lawsuits and sympathetically portrayed corporate interests, supporting big business and reinforcing negative stereotypes of law practices.

Based on extensive interviews, nearly two decades of newspaper coverage, and in-depth studies of the McDonald's coffee case and tobacco litigation, Distorting the Law offers a compelling analysis of the presumed litigation crisis, the campaign for tort law reform, and the crucial role the media play in this process.

The Regulatory Craft tackles one of the most pressing public policy issues of our time—the reform of regulatory and enforcement practice. Malcolm K. Sparrow shows how the vogue prescriptions for reform (centered on concepts of customer service and process improvement) fail to take account of the distinctive character of regulatory responsibilities—which involve the delivery of obligations rather than just services.In order to construct more balanced prescriptions for reform, Sparrow invites us to reconsider the central purpose of social regulation—the abatement or control of risks to society. He recounts the experiences of pioneering agencies that have confronted the risk-control challenge directly, developing operational capacities for specifying risk-concentrations, problem areas, or patterns of noncompliance, and then designing interventions tailored to each problem. At the heart of a new regulatory craftsmanship, according to Sparrow, lies the central notion, "pick important problems and fix them." This beguilingly simple idea turns out to present enormously complex implementation challenges and carries with it profound consequences for the way regulators organize their work, manage their discretion, and report their performance. Although the book is primarily aimed at regulatory and law-enforcement practitioners, it will also be invaluable for legislators, overseers, and others who care about the nature and quality of regulatory practice, and who want to know what kind of performance to demand from regulators and how it might be delivered. It stresses the enormous benefit to society that might accrue from development of the risk-control art as a core professional skill for regulators.

Fabricated tells the story of 3D printers, humble manufacturing machines that are bursting out of the factory and into schools, kitchens, hospitals, even onto the fashion catwalk. Fabricated describes our emerging world of printable products, where people design and 3D print their own creations as easily as they edit an online document.

A 3D printer transforms digital information into a physical object by carrying out instructions from an electronic design file, or 'blueprint.' Guided by a design file, a 3D printer lays down layer after layer of a raw material to 'print' out an object. That's not the whole story, however. The magic happens when you plug a 3D printer into today’s mind-boggling digital technologies. Add to that the Internet, tiny, low cost electronic circuitry, radical advances in materials science and biotech and voila! The result is an explosion of technological and social innovation.

Fabricated takes the reader onto a rich and fulfilling journey that explores how 3D printing is poised to impact nearly every part of our lives.

Aimed at people who enjoy books on business strategy, popular science and novel technology, Fabricated will provide readers with practical and imaginative insights to the question 'how will this technology change my life?' Based on hundreds of hours of research and dozens of interviews with experts from a broad range of industries, Fabricated offers readers an informative, engaging and fast-paced introduction to 3D printing now and in the future.

Until now, parametric programming has been the best-kept secret of CNC! This new book demystifies this simple yet sophisticated programming tool in an easy-to-understand tutorial format, and presents a comprehensive how-to of parametric programming from a user's point of view. Focusing on three of the most popular versions of parametric programming - Fanuc's custom macro B. Okuma's user task 2, and Fadal's macro - the book describes what parametric programming is, what it can do, and how it does it more efficiently than manual programming. Along with a host of program-simplifying techniques included in the book, you're treated to descriptions of how to write, set-up and run general subprograms simulate the addition of control options and integrate higher level programming capabilities at G-code level.

In this thoroughly revised Fourth Edition, Glenn Wong provides a comprehensive review of the various sports law issues facing professional, intercollegiate, Olympic, high school, youth, and adult recreational sports. Major topics include tort liability, contracts/waivers, antitrust law, labor law, constitutional law, gender discrimination, drug testing, intellectual property law, broadcasting laws pertaining to sports agents, business and employment law, Internet gambling, and athletes with disabilities. Significant additions here include new court decisions, agreements (contracts and collective bargaining agreements), and legislation (federal, state, association, and institutional rules and regulations). Discussions of legal concepts are supplemented with summaries and excerpts from hundreds of actual sports cases. Wong cites a variety of books, law review articles, newspaper articles, and Web links for those requiring further information on particular topics. This text-professional guide serves as an invaluable resource to those involved, or studying to become involved, in the vast industry of sports.

"I wrote this to help you survive the dissolution of your marriage without the financial ruin most people face," said Judge Stewart. His wise guidance shows readers how to: establish realistic expectations about divorce; find and hire a good attorney; control their attorney's actions and fees; use mediation and/or arbitration effectively; handle child and spousal support; protect children during the difficult times.