Compact Ku-band Transmitter Design for Satellite Communication Applications's strength is clearly seen in its focus on component-based design for wireless system applications. This aspect represents realistic views of today's wireless design. The book will bring essential design skills to engineers as well as references to the academic community.
* Describes the actual implementation of receiver architecturesfrom the initial design to an IC-based product
* Presents many tricks-of-the-trade not usually covered intextbooks
* Covers a range of practical issues including semiconductortechnology selection, cost versus performance, yield, packaging,prototype development, testing, and analysis
* Discusses architectures that are employed in modern broadbandwireless systems
Key Features:Covers the physical and medium access layers (OSI Layer 1 and2), with emphasis on access transmission technologyCompares and contrasts all recent and emerging wired andwireless standards for broadband access in a single referenceIllustrates the technology that is currently being deployed bynetwork providers, and also the technology that has recently beenor will soon be standardized for deployment in the coming years,including vectoring, wavelength division multiple access, CDMA,OFDMA, and MIMOContains detailed discussion on the following standards:10G-EPON, G-PON, XG-PON, VDSL2, DOCSIS 3.0, DOCSIS Protocol overEPON, power line carrier, IEEE 802.11 WLAN/WiFi, UMTS/HSPA, LTE,and LTE-Advanced
Advanced communication microsystems—the latest technologyto emerge in the semiconductor sector aftermicroprocessors—require integration of diverse signalprocessing blocks in a power-efficient and cost-effective manner.Typically, these systems include data acquisition, data processing,telemetry, and power management. The overall development is asynergy among system, circuit, and component-level designs with astrong emphasis on integration.
This book is targeted at students, researchers, and industrypractitioners in the semiconductor area who require a thoroughunderstanding of integrated communication microsystems from adeveloper's perspective. The book thoroughly and carefullyexplores:
Fundamental requirements of communication microsystems
System design and considerations for wired and wirelesscommunication microsystems
Advanced block-level design techniques for communicationmicrosystems
Integration of communication systems in a hybrid environment
Power and form factor trade-offs in building integratedmicrosystems
Advanced Integrated Communication Microsystems is an idealtextbook for advanced undergraduate and graduate courses. It alsoserves as a valuable reference for researchers and practitioners incircuit design for telecommunications and related fields.
--Hans Camenzind, inventor of the 555 timer (the world's most successful integrated circuit), and author of Much Ado About Almost Nothing: Man's Encounter with the Electron (Booklocker.com)
"A fabulous book: well written, well paced, fun, and informative. I also love the sense of humor. It's very good at disarming the fear. And it's gorgeous. I'll be recommending this book highly."
--Tom Igoe, author of Physical Computing and Making Things Talk
Want to learn the fundamentals of electronics in a fun, hands-on way? With Make: Electronics, you'll start working on real projects as soon as you crack open the book. Explore all of the key components and essential principles through a series of fascinating experiments. You'll build the circuits first, then learn the theory behind them!
Build working devices, from simple to complex You'll start with the basics and then move on to more complicated projects. Go from switching circuits to integrated circuits, and from simple alarms to programmable microcontrollers. Step-by-step instructions and more than 500 full-color photographs and illustrations will help you use -- and understand -- electronics concepts and techniques.Discover by breaking things: experiment with components and learn from failure Set up a tricked-out project space: make a work area at home, equipped with the tools and parts you'll need Learn about key electronic components and their functions within a circuit Create an intrusion alarm, holiday lights, wearable electronic jewelry, audio processors, a reflex tester, and a combination lock Build an autonomous robot cart that can sense its environment and avoid obstacles Get clear, easy-to-understand explanations of what you're doing and why
This third edition includes more real-world examples and a glossary of formulae. It contains new coverage of:MicrocontrollersFPGAsClasses of componentsMemory (RAM, ROM, etc.)Surface mountHigh speed designBoard layoutAdvanced digital electronics (e.g. processors)Transistor circuits and circuit designOp-amp and logic circuitsUse of test equipmentGives readers a simple explanation of complex concepts, in terms they can understand and relate to everyday life. Updated content throughout and new material on the latest technological advances.Provides readers with an invaluable set of tools and references that they can use in their everyday work.
The Electronics Engineering book covers the study of electronic components, circuits, transmitter, receiver, integrated circuits (IC). It also provides basic laws of electronics, magnetism, series and parallel circuits and basics electronics like logic gates.
Visit us: www.kaniz.in
Navigate the roadmaps of simple electronic circuits and complex systems with help from an experienced engineer. With all-new art and demo circuits you can build, this hands-on, illustrated guide explains how to understand and create high-precision electronics diagrams. Find out how to identify parts and connections, decipher element ratings, and apply diagram-based information in your own projects. Beginner’s Guide to Reading Schematics, Third Edition, also contains valuable appendices covering symbols and resistor color codes.
Featuring detailed coverage of:Schematic, block, and pictorial diagrams Resistors and capacitors Inductors and transformers Switches, conductors, and cables Diodes, transistors, and logic gates Electron tubes Cells and batteries Voltage dividers and reducers Breadboards and wire wrapping Electronics troubleshooting
Welcome to the world of shoes that can dynamically shift your height, jackets that display when the next bus is coming, and neckties that can nudge your business partner from across the room. Whether it be for fashion, function, or human connectedness, wearable electronics can be used to design interactive systems that are intimate and engaging.
Make: Wearable Electronics is intended for those with an interest in physical computing who are looking to create interfaces or systems that live on the body. Perfect for makers new to wearable tech, this book introduces you to the tools, materials, and techniques for creating interactive electronic circuits and embedding them in clothing and other things you can wear.
Each chapter features experiments to get you comfortable with the technology and then invites you to build upon that knowledge with your own projects. Fully illustrated with step-by-step instructions and images of amazing creations made by artists and professional designers, this book offers a concrete understanding of electronic circuits and how you can use them to bring your wearable projects from concept to prototype.
See Additional Notes at the back of the book for instructions to download the accompanying interactive App which brings the 250+ topics to life by allowing you to insert your own values. Visually on a phone or tablet it looks almost identical to the eBook pages, except you can edit the inputs to update the graphics and calculations to reflect those changes.
There is also a comprehensive PC version to download with even more features both applications can be unlocked with your eBook purchase receipt for no additional charge.
Education Bundle: eBook + PC software + App at a tiny fraction of the previously published price.
At the end of the book, you’ll apply everything you’ve learned by building an analog synthesizer, using the MFOS Noise Toaster kit. You’ll also learn what it takes to create synth-DIY electronic music studio. Get started in the fun and engaging hobby of synth-DIY without delay.
With this book, you’ll learn:The differences between analog and digital synthesizersAnalog synthesizer building blocks, including VCOs, VCFs, VCAs, and LFOsHow to tool up for synth-DIY, including electronic instruments and suggestions for home-made equipmentFoundational circuits for amplification, biasing, and signal mixingHow to work with the MFOS Noise Toaster kitSetting up a synth-DIY electronic music studio on a budget
Stay Current with the Latest Technologies
In addition to updates to nearly every existing chapter, this edition features five entirely new contributions on...
Silicon-on-insulator (SOI) materials and devices
Supercritical CO2 in semiconductor cleaning
Damascene copper electroplating
Effects of terrestrial radiation on integrated circuits (ICs)
Reflecting rapid progress in many areas, several chapters were heavily revised and updated, and in some cases, rewritten to reflect rapid advances in such areas as interconnect technologies, gate dielectrics, photomask fabrication, IC packaging, and 300 mm wafer fabrication.
While no book can be up-to-the-minute with the advances in the semiconductor field, the Handbook of Semiconductor Manufacturing Technology keeps the most important data, methods, tools, and techniques close at hand.
Filling the gap between a beginner’s primer and a formal textbook, Practical Electronics explores aspects of electronic components, techniques, and tools that you would typically learn on the job and from years of experience. Even if you’ve worked with electronics or have a background in electronics theory, you’re bound to find important information that you may not have encountered before.
Among the book’s many topics, you’ll discover how to:Read and understand the datasheet for an electronic componentUse uncommon but inexpensive tools to achieve more professional-looking resultsSelect the appropriate analog and digital ICs for your projectSelect and assemble various types of connectorsDo basic reverse engineering on a device in order to modify (hack) itUse open source tools for schematic capture and PCB layoutMake smart choices when buying new or used test equipment
*Hand-picked content selected by analog design legend Robert Pease
*Proven best design practices for op amps, feedback loops, and all types of filters
*Case histories and design examples get you off and running on your current project
Written with the Maker in mind, this book will focus mostly on Rasbian running on the Raspberry Pi as it is the most prolific in the ecosystem today. However most of the topics covered will apply broadly to other Linux distributions and will be called out when they may differ. Many times users cut and paste from a website tutorial into the Linux command line without understanding what they are actually doing only to be frustrated when they want to modify or tweak something to suit their needs. Also, many Makers shy away from using the Raspberry Pi or similar board because they feel Linux is too foreign and they think using a command line will be more difficult than using a GUI. This book aims to overcome those fears and provide a foundation for further learning and exploration. To that end, this book will focus on the basic principles that a Maker would need to know as opposed to other resources that go into detail that is not particularly relevant to building projects.
Although integrated circuits have widespread application, the role of discrete transistors both as important building blocks which students must understand, and as practical solutions to design problems, remains undiminished.
The ninth edition has been thoroughly updated to cover the latest technology and applications, including computer circuit simulation, and many diagrams have been revised to bring them in line with current usage. Updated topics include thyristors, Darlington transistors, amplifiers, ring modulators, power supplies, optoelectronics and logic circuits.The transistor circuits bibleUpdated with new developments in technology and applicationsAccessible step-by-step introduction ideal for noviceS
A step-by-step build-up of syntax
Code examples for each concept
Over 8000 lines of downloadable code examples
Updates to reflect the SystemC standard, IEEE 1666
Why features are as they are
Many resource references
How SystemC fits into an ESL methodology
This new edition of an industry best seller is updated to reflect the standardization of SystemC as IEEE 1666 and other improvements that reflect feedback from readers of the first edition. The wide ranging feedback also include suggestions from editors of the Japanese and Korean language translations, professors and students, and computer engineers from a broad industrial and geographical spectrum, all who have successfully used the first edition.
New chapters have been added on the SystemC Verification Library and the Transaction Level Modeling, and proposed changes to the current SystemC standard.
David Black and Jack Donovan, well known consultants in the EDA industry, have teamed with Bill Bunton and Anna Keist, experienced SystemC modeling engineers, to write the second edition of this highly popular classic. As a team the authors bring over 100 years of ASIC and system design experience together to make a very readable introduction to SystemC.
Other books tell readers what to do, but sometimes fail to explain why – Brindley gives readers hands-on confidence in addition to real scientific knowledge, and insight into the principles as well as the practice. All written explanations and steps are supplemented with numerous photos, charts, tables and graphs. Concepts and practical aspects are explained thoroughly with mathematical formulae and technical schematic drawings.
Each chapter introduces a concept or tool, explains the basic theory, and provides clear instructions for a simple experiment to apply the concept or tool, with quiz sections and answers, at the end of each chapter. New chapters on multimeters and soldering will be added, covering the fundamentals and experiments, with a basic parts list and an expanded and updated buyer’s guide.Guides the reader through the basics of electronics, from fundamentals of theory to practical work and experimentsStructured for learning and self-study: each chapter introduces a concept or tool, explains the basic theory, and provides clear instructions for a simple experiment to apply the concept or tool, with quiz sections and answers, at the end of each chapterNew chapters on multimeters and soldering, covering the fundamentals and experiments, with a basic parts list. Expanded and updated buyer’s guide to accompany parts lists
Here's the fun and easy way to start building circuits for yourprojects
Have you ever wanted to build your own electronic device? Puttogether a thermostat or an in-line fuse, or repair a microphonecable? This is the book for you! Inside you'll find the tools andtechniques you need to build circuits, with illustrated,step-by-step directions to help accomplish tasks and completeprojects.
As you accomplish the tasks throughout the book, you'll constructmany projects while learning the key circuitbuilding principles andtechniques. Find out about measuring and testing, maintenance andtroubleshooting, cables, connectors, how to test your stuff, andmore.
Stuff You Need to Know
The tools you need and how to use them
How to make sense of schematics and printed circuit boards
Basic techniques for creating any circuit
How to make and repair cables and connectors
Testing and maintenance procedures
This book picks up where Make: Electronics left off: you'll work with components like comparators, light sensors, higher-level logic chips, multiplexers, shift registers, encoders, decoders, and magnetic sensors. You'll also learn about topics like audio amplification, randomicity, as well as positive and negative feedback. With step-by-step instructions, and hundreds of color photographs and illustrations, this book will help you use -- and understand -- intermediate to advanced electronics concepts and techniques.
digital phase-locked loops
frequency-to-voltage and voltage-to-frequency converters
light wave communicators
magnetic field sensors
pseudorandom number generators
and much, much, more!
The book describes a parametric sweep, which involves sweeping a parameter through a range of values, along with the use of Stimulus Editor to define transient analog and digital sources. It also examines the failure of simulations due to circuit errors and missing or incorrect parameters, and discusses the use of Monte Carlo analysis to estimate the response of a circuit when device model parameters are randomly varied between specified tolerance limits according to a specified statistical distribution. Other chapters focus on the use of worst-case analysis to identify the most critical components that will affect circuit performance, how to add and create PSpice models, and how the frequency-related signal and dispersion losses of transmission lines affect the signal integrity of high-speed signals via the transmission lines.
Practitioners, researchers, and those interested in using the Cadence/OrCAD professional simulation software to design and analyze electronic circuits will find the information, methods, compounds, and experiments described in this book extremely useful.Provides both a comprehensive user guide, and a detailed overview of simulationEach chapter has worked and ready to try sample designs and provides a wide range of to-do exercisesCore skills are developed using a running case study circuitCovers Capture and PSpice together for the first time
This book demonstrates the programming methodology and tools used by most professionals in embedded design, and will enable you to apply your knowledge and programming skills for any real-life application. Providing a step-by-step guide to the subject matter, this book will encourage you to alter, expand, and customize code for use in your own projects.A complete introduction to C programming using PIC microcontrollers, with a focus on real-world applications, programming methodology and toolsEach chapter includes C code project examples, tables, graphs, charts, references, photographs, schematic diagrams, flow charts and compiler compatibility notes to channel your knowledge into real-world examplesOnline materials include presentation slides, extended tests, exercises, quizzes and answers, real-world case studies, videos and weblinks
"Henry Ott has literally 'written the book' on the subject ofEMC. . . . He not only knows the subject, but has the rare abilityto communicate that knowledge to others."
Electromagnetic Compatibility Engineering is a completelyrevised, expanded, and updated version of Henry Ott's popular bookNoise Reduction Techniques in Electronic Systems. It reflects themost recent developments in the field of electromagneticcompatibility (EMC) and noise reduction¿and their practicalapplications to the design of analog and digital circuits incomputer, home entertainment, medical, telecom, industrial processcontrol, and automotive equipment, as well as military andaerospace systems.
While maintaining and updating the core information—suchas cabling, grounding, filtering, shielding, digital circuitgrounding and layout, and ESD—that made the previous booksuch a wide success, this new book includes additional coverageof:
Switching power supplies and variable-speed motor drives
Digital circuit power distribution and decoupling
PCB layout and stack-up
Mixed-signal PCB layout
RF and transient immunity
Power line disturbances
Precompliance EMC measurements
New appendices on dipole antennae, the theory of partialinductance, and the ten most common EMC problems
The concepts presented are applicable to analog and digitalcircuits operating from below audio frequencies to those in the GHzrange. Throughout the book, an emphasis is placed on cost-effectiveEMC designs, with the amount and complexity of mathematics kept tothe strictest minimum.
Complemented with over 250 problems with answers,Electromagnetic Compatibility Engineering equips readerswith the knowledge needed to design electronic equipment that iscompatible with the electromagnetic environment and compliant withnational and international EMC regulations. It is an essentialresource for practicing engineers who face EMC and regulatorycompliance issues and an ideal textbook for EE courses at theadvanced undergraduate and graduate levels.
Recognized worldwide as the definitive guide to power supply design for over 25 years, Switching Power Supply Design has been updated to cover the latest innovations in technology, materials, and components. This Third Edition presents basic principles of all the commonly used topologies, providing you with the essential information required to design cutting-edge power supplies.
Using a tutorial, how-to approach, this expert resource is filled with design examples, equations, and charts. The Third Edition of Switching Power Supply Design features:Designs for all the most useful switching power supply topologies The basic principles required to solve day-to-day design problems A strong focus on magnetics design New to this edition: a full chapter on choke design and quasi-resonant switching methods
Get Everything You Need to Design a Complete Switching Power Supply• Fundamental Switching Regulators • Push-Pull and Forward Converter Topologies • Half- and Full-Bridge Converter Topologies • Flyback Converter Topologies • Current-Mode and Current-Fed Topologies • Miscellaneous Topologies • Transformer and Magnetics Design • High-Frequency Choke Design • Bipolar Power Transistor Base Drives • MOSFET Power Transistors and Input Drive Circuits • Magnetic Amplifier Postregulators • Turn-on, Turn-off Switching Losses and Snubbers • Feedback-Loop Stabilization • Resonant Converters • Waveforms • Power Factor, Power Factor Correction • High-Frequency Power Sources for Fluorescent Lamps • Low-Input-Voltage Regulators for Laptop Computers and Portable Electronics • Phase-Shifted Zero-Voltage Transition Full-Bridge Converter
Taking an application-oriented approach, the authors illustrate how material characteristics, tribological behavior, and loading impact the degradation of contacts, formation of intermetallics, and overall reliability and performance. Coverage is divided broadly into three sections, with the first focused on mechanics, tribology, materials, current and heat transfer, and basic reliability issues of electrical contacts. The next section explores applications, such as power connections, electronic connections, and sliding contacts, while the final section presents the diagnostic and monitoring techniques used to investigate and measure phenomena occurring at electrical contact interfaces. Numerous references to current literature reflect the fact that this book is the most comprehensive survey in the field.
Explore an impressive collection of data, theory, and practical applications in Electrical Contacts: Fundamentals, Applications, and Technology, a critical tool for anyone investigating or designing electrical equipment with improved performance and reliability in mind.
Fully updated to incorporate new SPICE features and capabilities, this practical guide explains, step by step, how to simulate, test, and improve switch-mode power supply designs. Detailed formulas with founding equations are included. Based on the author's continued research and in-depth, handson work in the field, this revised resource offers a collection of the latest SPICE solutions to the most difficult problem facing power supply designers: creating smaller, more heat-efficient power supplies in shorter design cycles.
NEW to this edition:Complete analysis of rms currents for the three basic cells in CCM and DCM PWM switch at work in the small-signal analysis of the DCM boost and the QR flyback OTA-based compensators Complete transistor-level TL431 model Small-signal analysis of the borderline-operated boost PFC circuit operated in voltage or current mode All-over power phenomena in QR or fixed-frequency discontinuous/continuous flyback converters Small-signal model of a QR flyback converter Small-signal model of the active clamp forward converter operated in voltagemode control Electronic content—design templates and examples available online
Switch-Mode Power Supplies: SPICE Simulations and Practical Designs, Second Edition, covers:
Small-signal modeling * Feedback and ciontrol loops * Basic blocks and generic switched models * Nonisolated converters * Off-line converters * Flyback converters * Forward converters * Power factor correction
This book is informed by the authors' years of experience, wisdom and expertise, giving engineers all the methods, techniques and tricks that they need to optimize their analog electronic designs.
With this book you will learn:Single op amp designs that get the most out of every amplifier Which specifications are of most importance to your design, enabling you to narrow down the list of amplifiers to those few that are most suitable Strategies for making simple "tweaks" to the design – changes that are often apparent once a prototype has been constructedHow to design for hostile environments – extreme temperatures, high levels of shock, vibration, and radiation – by knowing what circuit parameters are likely to degrade and how to counteract that degradation
New to this edition:Unified design procedures for gain and offset circuits, and filter circuitsTechniques for voltage regulator designInclusion of design utilities for filter design, gain and offset, and voltage regulationAnalysis of manufacturer design aids Companion website with downloadable materialA complete, cookbook-style guide for designing and building analog circuits A multitude of workable designs that are ready to use, based on real-world component values from leading manufacturers using readily available componentsA treasure trove of practical wisdom: strategies to tweak a design; guidelines for developing the entire signal chain; designing for hostile environments, and more
Filled with do-it-yourself project, this hands-on manual gives you all the technical information and easy-to-follow instructions you need to assemble and customize an electric bike.
Build Your Own Electric Bicycle gets you on the road on a reliable, economical, environmentally friendly ride. Inside, you'll find complete coverage of every component, including motors, controllers, batteries, and frames, as well as details on soldering, electrical wiring, safety, and other essential skills. The book covers commercially available electric bicycles and shows you how to make modifications and upgrades for improved power, speed, range, and safety. Pictures, diagrams, and charts illustrate each step along the way. With this how-to guide on hand, you'll be riding your own tricked-out electric bike in no time!
BUILD YOUR OWN ELECTRIC BICYCLE COVERS:Energy savings and environmental benefits Electrical, battery, and road safety Long-range, folding, and high-power bikes Hub motor kits Motors, controllers, and batteries Electrical connections and wiring Brakes Troubleshooting, maintenance, and repair Performance and safety modifications
Improved features of this new edition include: A new chapter on input filters, showing how to design single and multiple section filters; Major revisions of material on averaged switch modeling, low-harmonic rectifiers, and the chapter on AC modeling of the discontinuous conduction mode; New material on soft switching, active-clamp snubbers, zero-voltage transition full-bridge converter, and auxiliary resonant commutated pole. Also, new sections on design of multiple-winding magnetic and resonant inverter design; Additional appendices on Computer Simulation of Converters using averaged switch modeling, and Middlebrook's Extra Element Theorem, including four tutorial examples; and Expanded treatment of current programmed control with complete results for basic converters, and much more. This edition includes many new examples, illustrations, and exercises to guide students and professionals through the intricacies of power electronics design.
Fundamentals of Power Electronics, Second Edition, is intended for use in introductory power electronics courses and related fields for both senior undergraduates and first-year graduate students interested in converter circuits and electronics, control systems, and magnetic and power systems. It will also be an invaluable reference for professionals working in power electronics, power conversion, and analog and digital electronics.
Organized into subareas to provide a more intuitive flow to the reader, this second edition adds more than a hundred pages of new content, including inductance models for interdigitated structures, design strategies for multi-layer power grids, advanced methods for efficient power grid design and analysis, and methodologies for simultaneously placing on-chip multiple power supplies and decoupling capacitors. The emphasis of this additional material is on managing the complexity of on-chip power distribution networks.
Circuit Simulation gives a clear description of thenumerical techniques and algorithms that are part of modern circuitsimulators, with a focus on the most commonly used simulationmodes: DC analysis and transient analysis. Tested in a graduatecourse on circuit simulation at the University of Toronto, thisunique text provides the reader with sufficient detail andmathematical rigor to write his/her own basic circuit simulator.There is detailed coverage throughout of the mathematical andnumerical techniques that are the basis for the various simulationtopics, which facilitates a complete understanding of practicalsimulation techniques. In addition, Circuit Simulation:
Explores a number of modern techniques from numerical analysisthat are not synthesized anywhere else
Covers network equation formulation in detail, with an emphasison modified nodal analysis
Gives a comprehensive treatment of the most relevant aspects oflinear and nonlinear system solution techniques
States all theorems without proof in order to maintain the focuson the end-goal of providing coverage of practical simulationmethods
Provides ample references for further study
Enables newcomers to circuit simulation to understand thematerial in a concrete and holistic manner
With problem sets and computer projects at the end of everychapter, Circuit Simulation is ideally suited for a graduatecourse on this topic. It is also a practical reference for designengineers and computer-aided design practitioners, as well asresearchers and developers in both industry and academia.
Additional highlights include:
- Fundamental information on communications, signal and system theories
- Coverage of superheterodyne, direct-conversion, low-IF, and band-pass sampling radio architectures
- Frequency planning, system link budgeting, and performance evaluation of transmitters and receivers
- Nonlinearity effect analyses involving intermodulation, interferer blocking, spectrum regrowth and modulation
- Approaches for specifying RF ASICs on which mobile systems are built
- AGC systems, ADC dynamic range consideration and power management are addressed
- In-depth treatment of both theoretical and practical aspects of mobile station RF system design
This comprehensive reference work covers a wide range of topics from general principles of communication theory, as it applies to digital radio designs to specific examples on implementing multimode mobile systems. Wireless engineering professionals will definitely find this an invaluable reference book.
The addition of questions at the end of each chapter as well as electronic simulation tools has allowed for a more practical, user-friendly text.Provides a practical design guide to both analog and digital electronic filters Includes electronic simulation toolsKeeps heavy mathematics to a minimum
New to this edition are chapters on functional safety, design and installation aspects of switchmode power converters with an introduction to EMC testing of integrated circuits, new details on CISPR 32/35, updates to new versions of the Directives DEF STAN 59-411, DO-160 and MIL STD 461, with more commentary on the implications and requirements of military and aerospace standards, and an added reference to CE Marking for military and problems of COTS.
In addition, new sections on IC emissions measurements per IEC 61967 are included, along with new coverage of FFT/time domain receivers, an expanded section on military/aerospace transients, special references to DO160 lightning, added material on MIL STD 461 CE101, RE101, and RS101, the latest practice in PCB layout with a discussion of slots in ground planes, current practice on decoupling, extended coverage of DC-DC converters and motor drives, and a new section on switching inverter (motor drives, renewable energy converters, etc.) installation, and the latest 2016 mandatory regulations of the RTTE and EMC Directives.Presents a complete introduction to EMC for product design from a practicing consultant in the field Includes short case studies that demonstrate how EMC product design is put into practiceProvides the latest 2016 mandatory regulations of both the RTTE Directive and EMC Directive
Contemporary portable communication and computing devices need high image quality, light weight, thin, and low power flat panel displays. The answer to this need is the color active matrix liquid crystal display (AMLCD). The rides of AMLCD technology over less than two decades to undisputed dominance as a flat panel display has been breathtaking, and designers of portable devices need a thorough understanding of the theory and applications of AMLCDs. Willem den Boer, a holder of over 30 patents in imaging technologies, has created this guide to AMLCD theory, operating principles, addressing methods, driver circuits, application circuits, and alternate flat display technologies (including active matrix flat panel image sensors). Numerous design and applications examples illustrate key points and make them relevant to real-world engineering tasks.
Need more information on Mobile Displays, go to: http://www.insightmedia.info/newsletters.php#mdr
· Systematically discusses the principles of liquid crystal displays and active matrix addressing.
· Describes methods of enhancing AMLCD image quality.
· Extensive coverage of AMLCD manufacturing techniques.
· Thorough examination of performance characteristics and specifications of AMLCDs.
This fully updated guide offers practical, easy-to-follow instruction on electricity and electronics. Written by a pair of experienced instructors, Teach Yourself Electricity and Electronics, Sixth Edition, features plain language explanations and step-by-step lessons that make it easy to understand the material quickly. Throughout, detailed illustrations, practical examples, and self-tests reinforce key concepts. Inside, you’ll find all-new coverage of switching power supplies, class-D amplifiers, lithium-polymer batteries, microcontrollers—even the Arduino electronics platform.
This up-to-date sixth edition covers:
· Direct Current (DC) Circuits
· Cells and Batteries
· Alternating Current (AC) Circuits
· Inductors and Capacitors
· Inductive and Capacitive Reactance
· Impedance and Admittance
· AC Power and Resonance
· Transformers and Impedance Matching
· Semiconductors, Diodes, and Transistors
· Integrated Circuits (ICs) and Electron Tubes
· Amplifiers and Oscillators
· Wireless Transmitters and Receivers
· Digital Circuits
· Microcontrollers, including the Arduino
· Transducers, Sensors, Location, and Navigation
· Acoustics and Audio
· Advanced Communication Systems
· Antennas for RF Communications
The main thrust of the material is analog circuitry, focusing on fundamental principles of transistors, integrated circuit and vacuum tube-based amplifier operation and theory, and operation of typical guitar signal processing effects circuits. Updated to the new edition include:
• New coverage of tone control circuits, MOSFETS and their applications as small-signal amplifiers, rail splitters and charge pumps, amplifiers using germanium transistors, and tube power amp design
• Expanded coverage of numerous subjects such as vacuum tube power supplies, the digital oscilloscope, Darlington and Sziklai transistors, and signal spectra and transfer function symmetry
• Additional examples of various circuits such as overdrive, distortion, chorus, delay, tremolo and auto-wah circuits as well as amplifier design
Electronics for Guitarists is ideal for the musician or engineer interested in analog signal processing. The material is also useful to general electronics hobbyists, technologists and engineers with an interest in guitar and music-related electronics applications.
But if you incorporate Arduino or Raspberry Pi into your project, you can build much more sophisticated projects that can react in interesting ways and even connect to the Internet. This book starts by teaching you the basic electronic circuits to read and react to a sensor. It then goes on to show how to use Arduino to develop sensor systems, and wraps up by teaching you how to build sensor projects with the Linux-powered Raspberry Pi.
Designed to illustrate the practical application of power system analysis to real-world problems, this book provides detailed descriptions and models of major electrical equipment, such as transformers, generators, motors, transmission lines, and power cables. With 22 chapters and 7 appendices that feature new figures and mathematical equations, coverage includes:
Short-circuit analyses, symmetrical components, unsymmetrical faults, and matrix methods Rating structures of breakers Current interruption in AC circuits, and short-circuiting of rotating machines Calculations according to the new IEC and ANSI/IEEE standards and methodologies Load flow, transmission lines and cables, and reactive power flow and control Techniques of optimization, FACT controllers, three-phase load flow, and optimal power flow A step-by-step guide to harmonic generation and related analyses, effects, limits, and mitigation, as well as new converter topologies and practical harmonic passive filter designs—with examples More than 2000 equations and figures, as well as solved examples, cases studies, problems, and references
Maintaining the structure, organization, and simplified language of the first edition, longtime power system engineer J.C. Das seamlessly melds coverage of theory and practical applications to explore the most commonly required short-circuit, load-flow, and harmonic analyses. This book requires only a beginning knowledge of the per-unit system, electrical circuits and machinery, and matrices, and it offers significant updates and additional information, enhancing technical content and presentation of subject matter. As an instructional tool for computer simulation, it uses numerous examples and problems to present new insights while making readers comfortable with procedure and methodology.
High Voltage Circuit Breakers: Design and Applications features new material on contact resistance, insulating film coatings, and fretting; temperature at the point of contact; short-time heating of copper; erosion and electromagnetic forces on contacts; closing speed and circuit breaker requirements; "weld" break and contact bounce; factors influencing dielectric strength; air, SF6, vacuum, and solid insulation; and dielectric loss and partial discharges, and includes updated chapters on capacitance switching; switching series and shunt reactors; temporary overvoltages; and the benefits of condition monitoring.
What’s New in This EditionThree new chapters on electromagnetic fields in transformers, transformer-system interactions and modeling, and monitoring and diagnostics An extensively revised chapter on recent trends in transformer technology An extensively updated chapter on short-circuit strength, including failure mechanisms and safety factors A step-by-step procedure for designing a transformer Updates throughout, reflecting advances in the field
A blend of theory and practice, this comprehensive book examines aspects of transformer engineering, from design to diagnostics. It thoroughly explains electromagnetic fields and the finite element method to help you solve practical problems related to transformers. Coverage includes important design challenges, such as eddy and stray loss evaluation and control, transient response, short-circuit withstand and strength, and insulation design. The authors also give pointers for further research. Students and engineers starting their careers will appreciate the sample design of a typical power transformer.
Presenting in-depth explanations, modern computational techniques, and emerging trends, this is a valuable reference for those working in the transformer industry, as well as for students and researchers. It offers guidance in optimizing and enhancing transformer design, manufacturing, and condition monitoring to meet the challenges of a highly competitive market.
• B.Sc. (Computer Science)
• B.Sc. (Electronics)
• B.Sc. (Information Technology)
• B.Sc. (Physics)
• Bachelor of Computer Applications (BCA)
• Postgraduate Diploma in Computer Applications
• Master of Computer Applications (MCA)
The book emphasizes the must know concepts that should be covered in an introductory course and provides an abundance of clearly explained examples, so essential for a thorough understanding of the principles involved in the analysis and design of digital computers. The book takes students step-by-step through digital theory, focusing on:
» Number representation systems and codes for representing information in digital systems
» Use of logic gates in building digital circuits
» Basic postulates and theorems of Boolean algebra
» Karnaugh map method for simplifying Boolean functions
» Arithmetic circuits such as adders and subtractors
» Combinational circuit building blocks such as multiplexers, decoders and encoders
» Sequential circuit building blocks such as flip-flops, counters and registers
» Operation of memory elements such as RAM, DRAM, magnetic disk, magnetic bubble, optical disk, etc.
1. Number Systems and Codes
2. Logic Gates and Circuits
3. Boolean Algebra
4. Combinational Logic Circuits
5. Sequential Logic Circuits
6. Counters and Shift Registers
7. MEMORY ELEMENTS
With 25 years of experience in designing computing equipment, the author stresses the practical design of state machines. He clearly delineates each step of the structured and rigorous design principles that can be applied to practical applications. The book begins by reviewing the analysis of combinatorial logic and Boolean algebra, and goes on to define sequential machines and discuss traditional and alternative methods for synthesizing synchronous sequential machines. The final chapters deal with asynchronous sequential machines and pulse-mode asynchronous sequential machines. Because this volume is technology-independent, these techniques can be used in a variety of fields, such as electrical and computer engineering as well as nanotechnology.
By presenting each method in detail, expounding on several corresponding examples, and providing over 500 useful figures, Sequential Logic is an excellent tutorial on analysis and synthesis procedures.
Current Interruption Transients Calculationis acomprehensive resource for the understanding, calculation andanalysis of the transient recovery voltages (TRVs) and relatedre-ignition or re-striking transients associated with faultcurrent interruption and the switching of inductive and capacitiveload currents in circuits.
This book provides an original, detailed and practicaldescription of current interruption transients, origins, and thecircuits involved, and how they can be calculated and then analysedusing only a hand calculator and a spreadsheet program.
Key features:Detailed theory on all of the current interruption cases thatcan occur on a power system.Clear explanation on how to calculate transients, showing howfour basic circuits can represent all transients and can be solvedin general without any use of the ‘classical’ Laplacetransform method.Series and parallel RLC circuit theory, followed by thecalculation of pole factors using the symmetrical component methodto derive the base power frequency components, with results appliedto all the relevant transient cases.Fault current interruption and inductive and capacitive loadcurrent switching cases illustrated using real applicationexamples.
With its practical approach, this book offers engineers thetools they need when analysing circuit breaker applications. Itwill be of great interest to practicing engineers and electricutility staff involved in circuit breaker design, specification,testing, switchgear application, system operation and planning, andin particular, for engineers using simulation programs fortransient calculations. It will also be useful for seniorundergraduate and postgraduate electrical power engineeringstudents looking to work in switchgear manufacturers and testinglaboratories.
Fluid Power Circuits and Controls: Fundamentals and Applications encourages students to think of the collection of components as a system. The author illustrates each concept with a circuit diagram, and as each component is discussed, immediately places it in a circuit and analyzes its performance. This approach allows students to immediately apply what they have learned and encourages them to think about how the component operating characteristics interact with the rest of the circuit.
Covering all aspects of the industry, this book:
Develops the basic concept for power delivery with fluids
Reviews basic concepts of fluid mechanics and discusses the key properties of the fluids
Discusses the creation and control of flow and the various methods used to control pressure in a circuit
Provides a detailed example of the classic problem of hydrostatic transmission design
Presents characteristics of auxiliary components and applicable SAE standards
Addresses pneumatics, focusing on the difference in power transmission for liquid and gas
Discusses servo valves and proportional valves without requiring a background in automatic controls
The text is richly illustrated, filled with fully worked example problems, and reinforced with exercises in each chapter. Fluid Power Circuits and Controls offers valuable design experience and the background its readers need to approach real-world fluid power problems with confidence.
Two offset compensation techniques are described: auto-zeroing and chopping. Several topologies are discussed, with which these techniques can be used in the design of wide-band dynamic offset-compensated amplifiers. Four implementations are discussed in detail: two low-offset wide-band operational amplifiers, a low-offset instrumentation amplifier, and a low-offset current-sense amplifier, which can sense the current drawn from supply voltages up to 28V .