Quantitative and Aptitude Chapter Wise Concepts Practice Problems Book with Questions and Answers: 569+ Practice Problems with Detail Explanation

Fdaytalk
2
Free sample

CONTENT INSIDE Quantitative and Aptitude Chapter Wise Concepts Practice Problems with detailed explanation

No of Pages: 392 | Total Practice Problems with Explanation: 569+


**** Get Inside View of Book with 50% Free Sample. Look Inside and buy best book for your preparation

 

CHAPTER: NUMBER SYSTEM

Definitions of various Numbers Tables – 11 to 19

Squares – 2 to 99, Cubes – 1 to 30

Problems on Squares, Square Roots, Cube Roots, Sum of Unit Digits

Number Division of 5, 25, 50, 125, 625 and more 

Condition of Divisibility for Algebraic function

First n- Natural Numbers Questions

Total Practice Questions: 32


CHAPTER: HCF and LCM

HCF, LCM

Short Cuts to find HCF, LCM

Total Practice Questions: 32


CHAPTER: SIMPLIFICATIONS

BODMAS Rules Algebraic Formulas

Unit Digit (Binary) Theorem

Total Practice Questions: 57


CHAPTER: AGES AVERAGE PARTNERSHIP

Averages principles Ages Principles and Partnership Principles

Total Practice Questions: 72


CHAPTER: TRAINS DISTANCE SPEED TIME 

Distance Formulas

Problems on two trains moving same directions, Opp directions

Total Practice Questions: 54


CHAPTER: SIMPLE COMPOUND INTEREST

Simple Interest Principle Compound Interest Principle

Compound Half-yearly, Quarterly

Short method for Compound Interest

Total Practice Questions: 28


CHAPTER: PROFIT LOSS DISCOUNTS

Profit, Loss Principle

Selling price (S. P) and Cost price (C. P)

Total Practice Questions: 66


CHAPTER: TIME WORK PIPES

Total work done Principle Standard formulas, Short methods

Total Practice Questions: 70


CHAPTER: BOAT STREAMS

Downstream speed

Upstream speed

Total Practice Questions: 06


CHAPTER: CLOCK CALENDAR

Clock angle Principles

Find the day of any date, Counting of Odd days

Total Practice Questions: 06


CHAPTER: PERMUTATIONS COMBINATIONS

Permutations, Combinations Principle

Standard formulas

Total Practice Questions: 11


CHAPTER: PROBABILITY 

Tossing a coin, Throwing a dice

Probability events

Complimentary events

Pack of cards, Face cards

Total Practice Questions: 19


CHAPTER: ALGEBRA

Indices formulas

Standard algebra formulas  

Linear, Quadratic equations and Short methods

Total Practice Questions: 20


CHAPTER: GEOMETRY MENSURATION

Acute angle, Right angle, Obtuse angle, Complementary Angles and more

Lines & Transversal

Problems on triangle

Altitude & properties

Perpendicular bi-sector

Squares, Trapezium, Polygon, Cuboid, Cone

Total Practice Questions: 75


CHAPTER: TRIGONOMETRY

Standard formulas, Maximum and Minimum Values

Height & Distance

The angle of Elevation, Depression

Total Practice Questions: 07


Quntataitive Aptitude QA ebook for all competitive exams IBPS Banks, UPSC, SSC, Railways, State Psc's, RRB and more.

 

Read more
Collapse

About the author

Fdaytalk is online education Startup company

Read more
Collapse
4.0
2 total
Loading...

Additional Information

Publisher
Fdaytalk
Read more
Collapse
Published on
Sep 15, 2019
Read more
Collapse
Pages
392
Read more
Collapse
Read more
Collapse
Best For
Read more
Collapse
Language
English
Read more
Collapse
Genres
Education / General
Education / Reference
Education / Rural
Education / Special Education / General
Education / Testing & Measurement
Juvenile Nonfiction / Mathematics / Arithmetic
Juvenile Nonfiction / Mathematics / General
Juvenile Nonfiction / Study Aids / Book Notes
Juvenile Nonfiction / Study Aids / General
Study Aids / Bar Exam
Study Aids / English Proficiency (incl. TOEFL & IELTS)
Study Aids / GMAT (Graduate Management Admission Test)
Study Aids / MAT (Miller Analogies Test)
Study Aids / Vocational
Young Adult Nonfiction / Study Aids / Test Preparation
Read more
Collapse
Content Protection
This content is DRM protected.
Read more
Collapse

Reading information

Smartphones and Tablets

Install the Google Play Books app for Android and iPad/iPhone. It syncs automatically with your account and allows you to read online or offline wherever you are.

Laptops and Computers

You can read books purchased on Google Play using your computer's web browser.

eReaders and other devices

To read on e-ink devices like the Sony eReader or Barnes & Noble Nook, you'll need to download a file and transfer it to your device. Please follow the detailed Help center instructions to transfer the files to supported eReaders.
Comprehensive ASE A1-A8 exam questions. Covers the following:
A1 Auto: Engine Repair; A2 Auto: Automatic Transmission/Transaxle; A3 Auto: Manual Drive Train & Axles; A4 Auto: Suspension & Steering; A5 Auto: Brakes; A6 Auto: Electrical/Electronic Systems; A7 Auto: Heating & Air Conditioning; A8 Auto: Engine Performance

You have the Edge! You now have an "insiders view" of the Exam in every detail, in the exact Environment and patterns as test day! Gain Confidence and reduce study time.

samples:

Q. 240. Smaller diameter wire. Although the most common diameters of welding wire are ____” and ____”, a smaller diameter wire usually will make it easier to create a good weld.

 

a.      .035 to .045

b.      .025 to .045

c.       .015 to .035

d.      .045 to .025

                     

Ans: A

Exp: Smaller diameter wire. Although the most common diameters of welding wire are .045” and .035”, a smaller diameter wire usually will make it easier to create a good weld.

 

Q. 241 This is a good recommendation for thinner materials; but be careful using this approach on thicker materials ______” because there may be a risk of lack of fusion.

 

a.      >3/16

b.      < 3/16

c.       > 3/15

d.      < 3/15

                     

Ans: A

Exp: This is a good recommendation for thinner materials; but be careful using this approach on thicker materials >3/16” because there may be a risk of lack of fusion.

 

Q. 242. For most casual welders, a good rule of thumb to assure high quality welding is to change the tip after ever _____ lbs. of wire. Another point to remember about contact tips is that they should always be threaded completely into the gas diffuser and tightened prior to welding to give a smooth flow of welding current.

 

a.      200

b.      100

c.       400

d.      300

                     

Ans: B

Exp: For most casual welders, a good rule of thumb to assure high quality welding is to change the tip after ever 100 lbs. of wire.

   Proudly Made in the USA. Your purchase supports over 100 America workers including writers, editors, managers, researchers, service reps, programmers, engineers, designers and technicians. 80% of your purchase made between November and Dec will be donated to find a cure.

 

 

Comprehensive ASE A1-A8 exam questions. Covers the following:
A1 Auto: Engine Repair; A2 Auto: Automatic Transmission/Transaxle; A3 Auto: Manual Drive Train & Axles; A4 Auto: Suspension & Steering; A5 Auto: Brakes; A6 Auto: Electrical/Electronic Systems; A7 Auto: Heating & Air Conditioning; A8 Auto: Engine Performance

You have the Edge! You now have an "insiders view" of the Exam in every detail, in the exact Environment and patterns as test day! Gain Confidence and reduce study time.

samples:

Q. 240. Smaller diameter wire. Although the most common diameters of welding wire are ____” and ____”, a smaller diameter wire usually will make it easier to create a good weld.

 

a.      .035 to .045

b.      .025 to .045

c.       .015 to .035

d.      .045 to .025

                     

Ans: A

Exp: Smaller diameter wire. Although the most common diameters of welding wire are .045” and .035”, a smaller diameter wire usually will make it easier to create a good weld.

 

Q. 241 This is a good recommendation for thinner materials; but be careful using this approach on thicker materials ______” because there may be a risk of lack of fusion.

 

a.      >3/16

b.      < 3/16

c.       > 3/15

d.      < 3/15

                     

Ans: A

Exp: This is a good recommendation for thinner materials; but be careful using this approach on thicker materials >3/16” because there may be a risk of lack of fusion.

 

Q. 242. For most casual welders, a good rule of thumb to assure high quality welding is to change the tip after ever _____ lbs. of wire. Another point to remember about contact tips is that they should always be threaded completely into the gas diffuser and tightened prior to welding to give a smooth flow of welding current.

 

a.      200

b.      100

c.       400

d.      300

                     

Ans: B

Exp: For most casual welders, a good rule of thumb to assure high quality welding is to change the tip after ever 100 lbs. of wire.

 

©2019 GoogleSite Terms of ServicePrivacyDevelopersArtistsAbout Google|Location: United StatesLanguage: English (United States)
By purchasing this item, you are transacting with Google Payments and agreeing to the Google Payments Terms of Service and Privacy Notice.