4K Linker Total Control

HDfury

Über diese App

This APP request Bluetooth authorization and SD card/file writing permission.
It will allow you to control and operate your HDfury Linker and your Home Theater setup
It can perform the following:

- Modify and Upload Configuration.
- Switch Input channel.
- Set Auto switching mode.
- Set Input Priority mode.
- Turn Logo LED ON/OFF.
- Scale Up/Thru/Down
- 4K60 / 4K30 Preset
- Color Space / Deep Color setup
- Display current link speed and infoframe information.
- Display incoming signal information.
- Display active link(s).

List of Custom EDID banks available:

1 - Custom Uploaded/Default EDID
2 - 4k60-444 600MHz HDR BT.2020 All Sound
3 - 4k60-444 600MHz HDR BT.2020 Stereo
4 - 4k60-444 600MHz All Sound
5 - 4k60-444 600MHz Stereo
6 - 4k50-444 600MHz HDR BT.2020 All Sound
7 - 4k50-444 600MHz HDR BT.2020 Stereo
8 - 4k60-420 12-bit HDR BT.2020 All Sound
9 - 4k60-420 12-bit HDR BT.2020 Stereo
10 - 4k60-420 12-bit BT.2020 All Sound
11 - 4k60-420 12-bit BT.2020 Stereo
12 - 4k60-420 8-bit 300MHz All Sound
13 - 4k60-420 8-bit 300MHz Stereo
14 - 4k30-444 300MHz All Sound
15 - 4k30-444 300MHz Stereo
16 - 4k30-RGB 300MHz All Sound
17 - 4k30-RGB 300MHz Stereo
18 - 4k24-422 12-bit BT.2020 All Sound
19 - 4k24-422 12-bit BT.2020 Stereo
20 - 1080p-444 148MHz All Sound
21 - 1080p-444 148MHz HDR Stereo
22 - 1080p24-444 All Sound
23 - 1080p24-444 Stereo
24 - 1080I-444 All Sound
25 - 1080I-444 Stereo
26 - 4k60-444 600MHz HDR BT.2020 5.1
27 - 4k60-420 12-bit HDR BT.2020 5.1
28 - 4k60-420 8-bit 300MHz 5.1 Sound

You can create your own menu and add custom commands at any time through an editable XML menu file.
You can pair, connect and use the Bluetooth APP even when no signals is going through the Linker, in such conditions, the Bluetooth range is over >20m.

Neuerungen

1. Update to Android15