TappyTag Demo
10+
Downloads
Jedes Alter
info
Über diese App
Use this app to test and evaluate the TappyTag handshake feature on the TappyUSB and TappyBLE external NFC reader products. The TappyTag is a handshake mechanism built into TappyUSB and TappyBLE readers. The minimum firmware version required on the TappyUSB/TappyBLE is v1.0.
To setup your TappyUSB or TappyBLE reader to initiate the TappyTag handshake, you use the Tappy Demo App listed at:
https://play.google.com/store/apps/details?id=com.taptrack.bletappyexample&hl=en_CA&gl=US
Once you connect your Tappy reader to the Tappy Demo app (USB or BLE as needed), you select "Send", then "Basic NFC" , and select "TappyTag Handshake". You will be presented with the option to enter data you want sent over NFC to the phone that is tapping the reader. If needed enter some test data, and clock SEND. This will initiate the TappyTag handshake on the reader and you will see the lights on the reader flash.
On this app (TappyTag Demo), you can optionally enter data to transmit from the phone to the reader, select "Begin Tap Interaction". Hold the NFC reading area of the phone to the TappyUSB/BLE tap area, and the data will be exchanged in the handshake. You are able to view the data that was received by the phone and the reader.
To setup your TappyUSB or TappyBLE reader to initiate the TappyTag handshake, you use the Tappy Demo App listed at:
https://play.google.com/store/apps/details?id=com.taptrack.bletappyexample&hl=en_CA&gl=US
Once you connect your Tappy reader to the Tappy Demo app (USB or BLE as needed), you select "Send", then "Basic NFC" , and select "TappyTag Handshake". You will be presented with the option to enter data you want sent over NFC to the phone that is tapping the reader. If needed enter some test data, and clock SEND. This will initiate the TappyTag handshake on the reader and you will see the lights on the reader flash.
On this app (TappyTag Demo), you can optionally enter data to transmit from the phone to the reader, select "Begin Tap Interaction". Hold the NFC reading area of the phone to the TappyUSB/BLE tap area, and the data will be exchanged in the handshake. You are able to view the data that was received by the phone and the reader.
Aktualisiert am
Was die Sicherheit angeht, solltest du als Erstes verstehen, wie Entwickler deine Daten erheben und weitergeben. Die Datenschutz- und Sicherheitspraktiken können je nach deiner Verwendung, deiner Region und deinem Alter variieren. Diese Informationen wurden vom Entwickler zur Verfügung gestellt und können jederzeit von ihm geändert werden.
Keine Daten werden mit Drittunternehmen oder -organisationen geteilt
Keine Daten erhoben
Neuerungen
Initial release of the Android example/demo of the TappyTag Handshake that allows exchange of data between an mobile phone and an NFC reader without the use of peer to peer mode (now deprecated).
Support für diese App
phone
Telefonnummer
+18002936094
Informationen zum Entwickler
Papyrus Electronics Inc
info@taptrack.com
803-478 King St W
Toronto, ON M5V 0A8
Canada
+1 416-735-6650
