3D Fox - 3D Printer / CNC Cont
4,2star
191 recenzija
10 hilj.+
Preuzimanja
Svako
info
O aplikaciji
Print G-code files directly from your Android device via Wifi, Bluetooth or USB OTG/Host port.
3D Fox is simple to use, has a clear and meaningful log screen and works great on small/inexpensive devices as well.
Developed with a Reprap Prusa i3 with Mega2560 + Ramps + Marlin/Repetier + Slic3r, Wifi module ESP8266 and BT module JY-MCU, it should work with many other HW/SW combinations.
SPECIAL FEATURES:
• Web interface monitor printer and to upload/print files from your PC/Tablet browser over the network.
• Video streaming of the device built-in webcam.
• Take back control of SD card printing jobs after losing connection with the printer. You can use this feature to manager several printers with the same device: start a print job on printer A, then do something else on printer B, finally go back to printer A and take back control of the pending printing job.
NOTES:
• You must put your G-code files in \3DFox directory of your Andorid device. Use a file manager (we recommend ES File Explorer) to move files from their original location to \3DFox
• 3D Fox does not work with MakerBot or other printers using a proprietary communication protocol.
USB CONNECTION
• Android device must have a USB OTG/Host port: http://en.wikipedia.org/wiki/USB_On-The-Go
• Supported printer USB-to-serial chips:
- CDC ACM (eg Arduino Mega)
- FTDI (eg Melzi, Sanguinololu)
- CH34x
- CP210X, PL2303
WIFI MODULE ESP-01 (ESP8266 chip) succesfully tested:
• Firmware: transparent bridge \'esp-link\' by JeeLabs: http://github.com/jeelabs/esp-link
• Baud rate: 250000.
• Upload speed: 1 MB transferred in 100 s (with Mega2560+Marlin), comparable to USB connection speed.
• Antenna: performances boosted with this improvement: http://www.thingiverse.com/thing:1665680
BLUETOOTH MODULE
• Bluetooth module JY-MCU connection and configuration: http://reprap.org/mediawiki/index.php?title=Jy-mcu#A_simple_way_to_change_BT_module_settings_-_apparently_using_ftdi_chip.2C_but_not_recommended
FREE VERSION LIMITATIONS:
• Max file size for printing and uploading: 2 MB
• Custom commands: 12 instead of 36
• Decimal digits for XYZ positions and moves: 1 instead of 2
• There are only a few limitations. If you are happy with the app, please consider buying the Pro version to reward our development work. Pro version is available here: https://play.google.com/store/apps/details?id=com.fox3d.controller.pro
SUPPORT:
• For questions or bug reporting do not hesitate to write to Elisoft3D@gmail.com.
• For bug reporting please do not use Google Play Review comments as they do not allow an effective interaction with our development team.
3D Fox is simple to use, has a clear and meaningful log screen and works great on small/inexpensive devices as well.
Developed with a Reprap Prusa i3 with Mega2560 + Ramps + Marlin/Repetier + Slic3r, Wifi module ESP8266 and BT module JY-MCU, it should work with many other HW/SW combinations.
SPECIAL FEATURES:
• Web interface monitor printer and to upload/print files from your PC/Tablet browser over the network.
• Video streaming of the device built-in webcam.
• Take back control of SD card printing jobs after losing connection with the printer. You can use this feature to manager several printers with the same device: start a print job on printer A, then do something else on printer B, finally go back to printer A and take back control of the pending printing job.
NOTES:
• You must put your G-code files in \3DFox directory of your Andorid device. Use a file manager (we recommend ES File Explorer) to move files from their original location to \3DFox
• 3D Fox does not work with MakerBot or other printers using a proprietary communication protocol.
USB CONNECTION
• Android device must have a USB OTG/Host port: http://en.wikipedia.org/wiki/USB_On-The-Go
• Supported printer USB-to-serial chips:
- CDC ACM (eg Arduino Mega)
- FTDI (eg Melzi, Sanguinololu)
- CH34x
- CP210X, PL2303
WIFI MODULE ESP-01 (ESP8266 chip) succesfully tested:
• Firmware: transparent bridge \'esp-link\' by JeeLabs: http://github.com/jeelabs/esp-link
• Baud rate: 250000.
• Upload speed: 1 MB transferred in 100 s (with Mega2560+Marlin), comparable to USB connection speed.
• Antenna: performances boosted with this improvement: http://www.thingiverse.com/thing:1665680
BLUETOOTH MODULE
• Bluetooth module JY-MCU connection and configuration: http://reprap.org/mediawiki/index.php?title=Jy-mcu#A_simple_way_to_change_BT_module_settings_-_apparently_using_ftdi_chip.2C_but_not_recommended
FREE VERSION LIMITATIONS:
• Max file size for printing and uploading: 2 MB
• Custom commands: 12 instead of 36
• Decimal digits for XYZ positions and moves: 1 instead of 2
• There are only a few limitations. If you are happy with the app, please consider buying the Pro version to reward our development work. Pro version is available here: https://play.google.com/store/apps/details?id=com.fox3d.controller.pro
SUPPORT:
• For questions or bug reporting do not hesitate to write to Elisoft3D@gmail.com.
• For bug reporting please do not use Google Play Review comments as they do not allow an effective interaction with our development team.
Ažurirano dana
Sigurnost počinje razumijevanjem na koji način programeri prikupljaju i dijele vaše podatke. Privatnost podataka i sigurnosne prakse se mogu razlikovati ovisno o korištenju, regiji i dobi. Programer je pružio ove informacije i može ih s vremenom ažurirati.
Podaci se ne dijele s trećim stranama
Saznajte više o načinu na koji programeri pružaju izjavu o dijeljenju
Podaci se ne prikupljaju
Saznajte više o načinu na koji programeri pružaju izjavu o prikupljanju
Ocjene i recenzije
4,2
162 recenzije
Šta ima novo
v 1.4.19
• Added support for Idex printers and for SKR2 and SKR3 boards
v 1.4.18
• USB communication: now working with SKR boards
v 1.4.16
• Improved support for Android 10
v 1.4.15
• Introduced speed for manual Z moves
• Webserver: fixed bug in Webcam button
v 1.4.11
• Ability to prevent sleep mode
• Webserver: configurable refresh time
• Ability to change T, start/stop Fan and send Custom Commands during printing
• 2 decimal digits for XYZ positions and moves (Pro)
• Added support for Idex printers and for SKR2 and SKR3 boards
v 1.4.18
• USB communication: now working with SKR boards
v 1.4.16
• Improved support for Android 10
v 1.4.15
• Introduced speed for manual Z moves
• Webserver: fixed bug in Webcam button
v 1.4.11
• Ability to prevent sleep mode
• Webserver: configurable refresh time
• Ability to change T, start/stop Fan and send Custom Commands during printing
• 2 decimal digits for XYZ positions and moves (Pro)