Tiempos Ictus
100+
Downloads
Everyone
info
About this app
Introduction:
This application is designed to facilitate the registration of the times stroke code and generate a real-time clock with the evolution of the process.
Installation and startup:
Once installed on the device, the first time it is opened, we set the PHASES section (top right) we want to fill. Depending on the workplace and staff may interest one or the other. You can create new icon with "add", reorder or delete existing (marking the red cross).
(For example, in our center we moved to the subsidiary endovascular treatment patients to another facility. Therefore we remove applications relating to the times of angiography and maintain those relating to ambulance transport).
Data Entry:
To enter patient data, from the Home screen, fill patient identification (the text is free) and gained access to new patient.
the first CALL TIME screen appears. The remaining screens will follow a similar dynamic:
We have to fill in when the desired phase.
We can do this by pressing:
- NOW (enter the current time)
- 5M (counted five minutes from the current time)
-1 H (1 hour ago).
- Or enter it manually via the analog clock and calendar of the bottom.
Whatever the form of introduction, once selected will be out in the bottom of the screen and we will give OK to move to the next screen.
We will do the same steps with the other phases of the Ictus code.
We can move between the different screens through the lower arrows, may skip some stages.
SPECIAL SITUATIONS:
Imagine that we want to fill a more advanced stage and let the preconditions for later. As we move with the down between the different phases to fill you want.
If we introduce an earlier date or time prior to the implementation phase warn us that it is a mistake but end up keeping two hours.
If we are wrong to put any dates and times and is prior to the above will be reflected in the summary sorts the steps.
Pay special attention to episodes including the date change (episode occurs near 00.00h). In these cases there may be errors in the calculations are corrected by introducing the hours correctly.
VIEWING RESULTS
At any time during the process, you can press SUMMARY (above) and will show the summary of the data we have so far.
Then you can re-entry screens to complete or modify more results.
If we have finished the study, we can give TERMINATE and as we will show the final summary.
Remember that if we give ENDING we can not modify more that patient.
How to access patients?
If you have not been finalized it will appear on the main screen with your login name.
(For example, if we left the application with a patient without complete).
If it has been completed will appear when we activate on the main screen FINISHED SHOW tab. From there you can access the patient through its identifier name.
Patients can be deleted with a long press from the main menu.
This application is designed to facilitate the registration of the times stroke code and generate a real-time clock with the evolution of the process.
Installation and startup:
Once installed on the device, the first time it is opened, we set the PHASES section (top right) we want to fill. Depending on the workplace and staff may interest one or the other. You can create new icon with "add", reorder or delete existing (marking the red cross).
(For example, in our center we moved to the subsidiary endovascular treatment patients to another facility. Therefore we remove applications relating to the times of angiography and maintain those relating to ambulance transport).
Data Entry:
To enter patient data, from the Home screen, fill patient identification (the text is free) and gained access to new patient.
the first CALL TIME screen appears. The remaining screens will follow a similar dynamic:
We have to fill in when the desired phase.
We can do this by pressing:
- NOW (enter the current time)
- 5M (counted five minutes from the current time)
-1 H (1 hour ago).
- Or enter it manually via the analog clock and calendar of the bottom.
Whatever the form of introduction, once selected will be out in the bottom of the screen and we will give OK to move to the next screen.
We will do the same steps with the other phases of the Ictus code.
We can move between the different screens through the lower arrows, may skip some stages.
SPECIAL SITUATIONS:
Imagine that we want to fill a more advanced stage and let the preconditions for later. As we move with the down between the different phases to fill you want.
If we introduce an earlier date or time prior to the implementation phase warn us that it is a mistake but end up keeping two hours.
If we are wrong to put any dates and times and is prior to the above will be reflected in the summary sorts the steps.
Pay special attention to episodes including the date change (episode occurs near 00.00h). In these cases there may be errors in the calculations are corrected by introducing the hours correctly.
VIEWING RESULTS
At any time during the process, you can press SUMMARY (above) and will show the summary of the data we have so far.
Then you can re-entry screens to complete or modify more results.
If we have finished the study, we can give TERMINATE and as we will show the final summary.
Remember that if we give ENDING we can not modify more that patient.
How to access patients?
If you have not been finalized it will appear on the main screen with your login name.
(For example, if we left the application with a patient without complete).
If it has been completed will appear when we activate on the main screen FINISHED SHOW tab. From there you can access the patient through its identifier name.
Patients can be deleted with a long press from the main menu.
Updated on
Data safety
Developers can show information here about how their app collects and uses your data. Learn more about data safety
No information available
