VanPlanner is a planning tool for camper van conversions, made for self-builders and conversion workshops. Design the interior in 3D to the millimetre, lay the wiring, the water and the gas into it, check fit, weight and axle loads, and leave with the documents the workshop needs: cut list, sheet layout, drilling plans and cable list.
Electrics, water and gas, routed in your layout
- 12 V and 230 V: every cable run between battery, fuse box, charging booster, solar, inverter, shore power and each consumer, laid along the walls, under the floor and across the ceiling
- The real length of each run gives its cable cross-section, its fuse and a cable list to buy
- Fresh, hot and waste water from tank and pump to heater, taps and shower, with a check of the fall of waste pipes
- Gas pipe from the locker to hob and heater, with checks of the gas locker and the ventilation
- The holes that cables and pipes need in furniture and body are marked and appear in the drilling plans
- Power balance with battery, solar, booster and inverter, and a water balance
Design your own furniture
- Object editor: build any piece board by board, in real sheet materials, with a 3D preview
- Shaped boards: rounded corners, chamfers, arches, L-shapes or a free outline; tilted boards
- Turn any built-in piece into an editable object
- Import your own 3D models (GLB, glTF, OBJ, STL)
- Keep your objects in a library for other projects
- Own objects get the same cut list, sheet layout, weight and collision checks
Parametric furniture and components
- Kitchen blocks, cabinets, overhead lockers, benches, beds and a shower cabin: change one size, and doors, drawers, shelves and boards follow
- A catalogue of batteries, chargers, inverters, fridges, heaters, tanks, pumps, sockets and lights with their sizes and weights
A real van, not a box
- Load spaces sized like the VW T5, T6 and T6.1, Fiat Ducato (also Citroën Jumper, Peugeot Boxer, Ram ProMaster), Mercedes-Benz Sprinter, VW Crafter and MAN TGE, Ford Transit and Transit Custom, in their lengths and roof heights, or the sizes of your own van
- Leaning walls, wheel arches, ribs and the sliding door are part of the model
- Wall build-up: insulation, battens and lining for floor, walls and ceiling
Checks while you design
- Every board against the lining, the wheel arches, the doors and the other furniture
- Window openings against the structural ribs
- Weight, centre of gravity and axle loads against the permitted weights
Workshop documents
- Cut list by material, as a table file for the timber yard
- Sheet layout that nests the parts onto standard sheets, with use and cost per sheet
- For every piece of furniture: exploded view, assembly steps, screw plan, drilling plans and 1:1 templates for shaped boards
- "Play the build": the whole conversion stage by stage, from bare metal to the last cabinet
The whole project
- Eleven milestones from stripping the van to registration as a camper, with checklists
- Shopping list, budget, tools list and a timetable with calendar export
- Connect an AI assistant such as Claude or ChatGPT: it designs a layout, checks it and sends a link that opens it here in 3D
Free, private, works offline
- No account needed. Your projects stay on your device
- Save projects as files or share a layout as a link; an optional account syncs your devices
- Millimetres or inches. The app is in English and German
Please note: VanPlanner is a planning aid. Van dimensions come from manufacturer drawings and estimates: measure your own van. Have 230 V and gas installations checked by a qualified person, and check weights and legal requirements for your country. VanPlanner is an independent app, not affiliated with or endorsed by any vehicle manufacturer; vehicle names only describe compatibility.
3D van conversion planner: wiring, water, gas, cut lists, weight, axle loads.