MQTT Volume Control
50+
Preuzimanja
Svako
info
O aplikaciji
Remote control the audio volume of the Android device where this app is running - from HomeAssistant via MQTT.
The app solves a home automation issue I've had for years: In my house we have a wall-mounted Android tablet in the kitchen. This tablet is used for things like grocery lists, looking up recipes - and as our "internet radio" (via a set of active loudspeakers). However, I couldn't mute or control the volume while eating at the dinner table - at least not until now. This is the specific problem MQTT Volume Control app solves: Remote control the audio volume from HomeAssistant.
Once the application is connected to your MQTT broker, it will launch a service that stays connected in the background so you don't need to keep the app open. The service will try to keep the device alive, so it may cause the power usage to increase. For me in my setup this is fine as the wall-mounted tablet is always connected to a charger. You may want to enable the setting to automatically start the app when the device has booted, but apart from that everything else happens in HomeAssistant.
The app uses HomeAssistant MQTT auto discovery. This means the volume control entities should automatically appear in HomeAssistant (see screenshot). The app provides volume level controls for the media-, call-, alarm- and notifications audio streams, as well as a mute/unmute for media and notifications - depending on what the particular device supports.
Prerequisites: You will need an MQTT broker and the HomeAssistant home automation application. HomeAssistant must also be configured to use the MQTT broker. If you don't know what MQTT or HomeAssistant is, this app is probably not for you.
MQTT Volume Control supports both unencrypted MQTT, as well as MQTT over SSL/TLS.
The app solves a home automation issue I've had for years: In my house we have a wall-mounted Android tablet in the kitchen. This tablet is used for things like grocery lists, looking up recipes - and as our "internet radio" (via a set of active loudspeakers). However, I couldn't mute or control the volume while eating at the dinner table - at least not until now. This is the specific problem MQTT Volume Control app solves: Remote control the audio volume from HomeAssistant.
Once the application is connected to your MQTT broker, it will launch a service that stays connected in the background so you don't need to keep the app open. The service will try to keep the device alive, so it may cause the power usage to increase. For me in my setup this is fine as the wall-mounted tablet is always connected to a charger. You may want to enable the setting to automatically start the app when the device has booted, but apart from that everything else happens in HomeAssistant.
The app uses HomeAssistant MQTT auto discovery. This means the volume control entities should automatically appear in HomeAssistant (see screenshot). The app provides volume level controls for the media-, call-, alarm- and notifications audio streams, as well as a mute/unmute for media and notifications - depending on what the particular device supports.
Prerequisites: You will need an MQTT broker and the HomeAssistant home automation application. HomeAssistant must also be configured to use the MQTT broker. If you don't know what MQTT or HomeAssistant is, this app is probably not for you.
MQTT Volume Control supports both unencrypted MQTT, as well as MQTT over SSL/TLS.
Ažurirano dana
Sigurnost počinje razumijevanjem na koji način programeri prikupljaju i dijele vaše podatke. Privatnost podataka i sigurnosne prakse se mogu razlikovati ovisno o korištenju, regiji i dobi. Programer je naveo ove informacije i može ih s vremenom ažurirati.
Ova aplikacija može dijeliti ove vrste podataka s trećim stranama
ID-ovi uređaja ili drugi ID-ovi
Podaci se ne prikupljaju
Saznajte više o načinu na koji programeri pružaju izjavu o prikupljanju
Podaci se šifriraju tokom prenosa
Podaci se ne mogu izbrisati
Što je novo
Minimum API version 35
Try not to use edge-to-edge rendering
Try not to use edge-to-edge rendering
Podrška za aplikaciju
Informacije o programeru
Jakob Kjær Butler
makob@makob.dk
Irisvej 34
9310 Vodskov
Denmark
undefined
