몰카탐지기 (몰래카메라, 소형카메라 탐지)
Contains ads
100K+
Downloads
Everyone
info
About this app
Helps you find hidden cameras where you don't think there will be.
It is an app that anyone can use easily and usefully !!
It detects and informs electromagnetic radiation emitted by electronic devices (such as cameras and sound devices).
1) If you select the electromagnetic detection menu item, the measured value is displayed.
2) Generally, there will be around 30-50 measured radiation values. Its value may vary depending on the mobile device.
3) Place the mobile device where you want to detect / suspect. Each device has a different sensor position. The place where the value rises while holding an electronic device such as an earphone nearby is the sensor position of the device. The detector can only detect distances close to the sensor location.
4-1) When detecting electromagnetics higher than usual, the measuring system turns yellow. In this case, it has detected weak electromagnetic waves, and a small camera or other all-terrain electronic device and metal may be located near the mobile phone.
4-2) When the camera detects a suspect, the measuring system turns red! This means that there is a high likelihood of having a camera.
!Precautions!
* If the measured value is fixed or if the value is very large or low for no particular reason, please reset the magnet by shaking the phone to "Fig. 8" action.
* This app is designed to detect electromagnetic radiation and detect any object emitting electromagnetic waves. This includes, in particular, magnetized metal or other electronic devices. For example, you can react when you are close to a speaker, receiver, or car.
Therefore, just because the app displays a warning does not necessarily mean you have a camera !!! After scanning the suspicious area, please take a look at it.
* Valid in most locations, including books, shelves, clothes, sofa cushions, dolls, walls, behind mirrors, and suspected holes.
* You can easily change the default settings using the sensitivity bar or sensitivity editing to suit your environment and phone.
* The "sensor area" should be placed very close to suspicious objects and places where they can be detected.
* The effect of `` self-interference '' may cause the phone to decrease rapidly without increasing the value if the phone is brought into close proximity to the camera / device. Therefore, care must be taken even when the measured value decreases rapidly.
* If the measurement is not correct, test and check if the compass and GPS are working properly.
It is a camera with a turquoise filter. The ordinary human eye cannot see infrared light, but it can be seen through this camera.
For example, you can see the white infrared light by pressing the remote control while pointing at the front lamp of the remote control.
In the case of small cameras operating in infrared light, the white light on this screen can be distinguished.
More than 80 percent of the tiny cameras are Wi-Fi cameras.
This detection scans nearby WiFi for signals from suspect shooting devices.
1) If Wi-Fi is found in the bathroom or in a closed space, but there is no router nearby, you may suspect that there is a Wi-Fi camera.
2) Wi-Fi, which has a unique name (Mac Address type) among Wi-Fi, is in doubt. Ex) A7: 8B: C2: K8: CD: 5B.
3) Among WiFi, there is a hidden WiFi without a name. Various peripherals use this Wi-Fi as a signal. If such a device is found close in a bathroom, etc., the camera may be suspected.
* Because there are many Wi-Fi-type devices, you should be familiar with both methods 1 and 2 and use them to cope with many types of cameras.
If a strongly suspect device is found, try another detection in parallel.
Required access rights:
-Camera: Camera permission is required to find the camera's lens.
-Location: Location access permission is required to access the Wi-Fi function within the app.
It is an app that anyone can use easily and usefully !!
It detects and informs electromagnetic radiation emitted by electronic devices (such as cameras and sound devices).
1) If you select the electromagnetic detection menu item, the measured value is displayed.
2) Generally, there will be around 30-50 measured radiation values. Its value may vary depending on the mobile device.
3) Place the mobile device where you want to detect / suspect. Each device has a different sensor position. The place where the value rises while holding an electronic device such as an earphone nearby is the sensor position of the device. The detector can only detect distances close to the sensor location.
4-1) When detecting electromagnetics higher than usual, the measuring system turns yellow. In this case, it has detected weak electromagnetic waves, and a small camera or other all-terrain electronic device and metal may be located near the mobile phone.
4-2) When the camera detects a suspect, the measuring system turns red! This means that there is a high likelihood of having a camera.
!Precautions!
* If the measured value is fixed or if the value is very large or low for no particular reason, please reset the magnet by shaking the phone to "Fig. 8" action.
* This app is designed to detect electromagnetic radiation and detect any object emitting electromagnetic waves. This includes, in particular, magnetized metal or other electronic devices. For example, you can react when you are close to a speaker, receiver, or car.
Therefore, just because the app displays a warning does not necessarily mean you have a camera !!! After scanning the suspicious area, please take a look at it.
* Valid in most locations, including books, shelves, clothes, sofa cushions, dolls, walls, behind mirrors, and suspected holes.
* You can easily change the default settings using the sensitivity bar or sensitivity editing to suit your environment and phone.
* The "sensor area" should be placed very close to suspicious objects and places where they can be detected.
* The effect of `` self-interference '' may cause the phone to decrease rapidly without increasing the value if the phone is brought into close proximity to the camera / device. Therefore, care must be taken even when the measured value decreases rapidly.
* If the measurement is not correct, test and check if the compass and GPS are working properly.
It is a camera with a turquoise filter. The ordinary human eye cannot see infrared light, but it can be seen through this camera.
For example, you can see the white infrared light by pressing the remote control while pointing at the front lamp of the remote control.
In the case of small cameras operating in infrared light, the white light on this screen can be distinguished.
More than 80 percent of the tiny cameras are Wi-Fi cameras.
This detection scans nearby WiFi for signals from suspect shooting devices.
1) If Wi-Fi is found in the bathroom or in a closed space, but there is no router nearby, you may suspect that there is a Wi-Fi camera.
2) Wi-Fi, which has a unique name (Mac Address type) among Wi-Fi, is in doubt. Ex) A7: 8B: C2: K8: CD: 5B.
3) Among WiFi, there is a hidden WiFi without a name. Various peripherals use this Wi-Fi as a signal. If such a device is found close in a bathroom, etc., the camera may be suspected.
* Because there are many Wi-Fi-type devices, you should be familiar with both methods 1 and 2 and use them to cope with many types of cameras.
If a strongly suspect device is found, try another detection in parallel.
Required access rights:
-Camera: Camera permission is required to find the camera's lens.
-Location: Location access permission is required to access the Wi-Fi function within the app.
Updated on
Data safety
Developers can show information here about how their app collects and uses your data. Learn more about data safety
No information available
What's new
버그를 수정하였습니다.
