LabCom

Water-i.d.

About this app

Please note:
The app requires the location permission in order to connect to the PoolLab.
This is required by Android for Bluetooth 4.0⁺ connections inside an app.
-----------------------------------


The LabCom App is probably the most powerful and complete photometer tool in its field.

Through wireless connection you can:
• Create accounts (measurement sources)
• Synchronize measurements and remotely
controlled measurements (PrimeLab only)
• Calculate indices such as the Langelier
Index
• Display measured journals and send them
via PDF
• Test and set parameters and add new
parameters by entering a code to make
the PrimeLab more comprehensive
• Input your own water chemicals to create
dosing recommendations
• Free Cloud storage system
... is available and, when activated, can be consulted so that the measurement results automatically synchronize between all LabCom solutions.

Users such as public swimming pools, building service engineers, shipping companies, health departments, water companies and many others can view the field test results from their location at any time and immediately after the measurement.

Test results are assigned to "accounts". Accounts can be set so that different locations of a public bath e.g. trainer pool, splash pool etc. have their results assigned to them.

Click on an account to view the measurement results. These originate either from automatic synchronization with the photometers when measurements were made with them without using the app as a remote control or by remote-controlled measurement of PrimeLab.
The measurement results are set according to accounts and in chronological order. This can be filtered (date, parameters) and exported as a PDF.

Also, the calculation factor can be triggered in this menu, an LSI (Langelier Saturation Index) and RSI (Ryznar Stability Index).
Test parameters not generated by the photometers but necessary for the calculation
of the indices values, such as temperature, conductivity, flow rate, etc. can be entered manually into the App.
Click on "Dos Rec” In the result detail view, the user is prompted for the target value and receives on the basis of the measured value associated with the amount of water (stored under the relevant account) and the individual “Setup” stored water treatment chemicals, a dosing recommendation to the water parameters to set ideal conditions for your water based on the chemicals you use.

As mentioned under "results", the app allows the user to give dosage recommendations based on their own individually stored water treatment products.
It must be inserted once so that you can use your own water treatment chemicals in the
app that will then be available for calculation of dosing recommendations.

Supported devices:
PrimeLab 1.0 Multitest
PoolLab 1.0
9-in-1 Multitest
Finwell PRO

Ratings and reviews

UPDATE: Originally thought there was a software/firmware issue, but now I believe it was the batteries losing connection causing the PoolLab to reset (my employees were not telling me that the unit was shutting down unexpectedly). After removing and reinstalling the batteries I have had no further issues. I am only giving 4 stars because the is no imperial (US) conversion.

I also have the problem of not being able to connect with Bluetooth using LabCom. This makes the Pool Lab tester useless as I can no longer access any previous test measurements. UPDATE After contacting PoolLab support my PoolLab tester is now connecting with Bluetooth and working fine. The problem was that I did not have GPS switched on. Worth checking if you have this problem. Also very good support from them.

So many problems in current version! Bluetooth connectivity is intermittent and has to be manually scanned and connected each time to receive a single result. Numerical input is impossible to input as normally expected. Every time the number is input the app moves the decimal point to the end. To overcome this, each existing number has to be overwritten. TA refuses to register. Calculator doesn't work accurately. Overall, very poor app which cannot be trusted.

What's new

- Increased PoolLab 2.0 sampling limit to 100 for firmware version 10+
- Added latest chemistry database
- Fixed bug in ProbeBOX measurement feed when changing the language
- Corrected TDS conversion of ProbeBOX for K=0.1 and K=10 EC electrodes
- Added Salinity switch for TDS readings in ProbeBOX measurement feed
- Minor bug fixes and improvements