Tuner4TRONIC® Field
10K+
Downloads
Everyone
info
About this app
The installation and maintenance of indoor and outdoor luminaires with NFC technology is as easy as it gets – thanks to the Tuner4TRONIC® Field app.
The Tuner4TRONIC® Field app can be used for programming compatible OSRAM NFC LED drivers in the Field via NFC (Near-Field Communication) – wirelessly and without mains voltage. In most cases, it is possible to readout the driver’s configuration even after the device’s failure. With the Tuner4TRONIC® Field app, certain luminaire settings can be easily adjusted according to the specific needs and within a predefined range set by the luminaire manufacturer. For indoor and outdoor applications, a typical example is the adjustment of the light output depending on the required application. Using outdoor drivers, the dimming levels can be changed in order to optimize energy savings and you can also disable the dimming functionality for special applications such as roundabouts or pedestrian crossings. In addition, using the copy and-paste function of the app, the settings of the original luminaire (indoor and outdoor) can be easily transferred to the new one in a matter of seconds making the luminaire replacement more efficient than ever before.
The following features are provided by the T4T-Field app:
- Adjust the light output in percentage, lumens and milliamperes
- Edit constant lumen output (CLO)
- Adjust the automatic dimming levels, toggle dimming on/off (outdoor drivers only)
- Enter Luminaire Info (Text, GPS, QR)
- Copy and paste configurations from one LED driver to another
- Load LED driver configurations shared by e-mails
- Show a report of an LED driver’s configuration and send it via e-mail as a CSV file
- Show a report of an LED driver’s montoring data (D4i) and send it via e-mail as a CSV file
- Open data sheet by scanning the QR code on the driver
- Supported languages: English, French, German, Italian, Spanish
List of supported LED drivers: https://www.tuner4tronic.com/ddstore/#/field
The user manual of this app can be downloaded as a PDF from the following link:
https://projects.inventronics-light.com/t4t/UserManuals/osram-dam-4671218_OSR_User_manual_T4T_Field_app_EN_oct2023.pdf
The tech support is available at T4Tsupport@inventronicsglobal.com
Important note: This app is part of a system and provides no functionality as a stand-alone. To be able to work with this app, you need a compatible OSRAM OT LED driver with NFC interface. Contact your local INVENTRONICS sales representative for more information.
The Tuner4TRONIC® Field app can be used for programming compatible OSRAM NFC LED drivers in the Field via NFC (Near-Field Communication) – wirelessly and without mains voltage. In most cases, it is possible to readout the driver’s configuration even after the device’s failure. With the Tuner4TRONIC® Field app, certain luminaire settings can be easily adjusted according to the specific needs and within a predefined range set by the luminaire manufacturer. For indoor and outdoor applications, a typical example is the adjustment of the light output depending on the required application. Using outdoor drivers, the dimming levels can be changed in order to optimize energy savings and you can also disable the dimming functionality for special applications such as roundabouts or pedestrian crossings. In addition, using the copy and-paste function of the app, the settings of the original luminaire (indoor and outdoor) can be easily transferred to the new one in a matter of seconds making the luminaire replacement more efficient than ever before.
The following features are provided by the T4T-Field app:
- Adjust the light output in percentage, lumens and milliamperes
- Edit constant lumen output (CLO)
- Adjust the automatic dimming levels, toggle dimming on/off (outdoor drivers only)
- Enter Luminaire Info (Text, GPS, QR)
- Copy and paste configurations from one LED driver to another
- Load LED driver configurations shared by e-mails
- Show a report of an LED driver’s configuration and send it via e-mail as a CSV file
- Show a report of an LED driver’s montoring data (D4i) and send it via e-mail as a CSV file
- Open data sheet by scanning the QR code on the driver
- Supported languages: English, French, German, Italian, Spanish
List of supported LED drivers: https://www.tuner4tronic.com/ddstore/#/field
The user manual of this app can be downloaded as a PDF from the following link:
https://projects.inventronics-light.com/t4t/UserManuals/osram-dam-4671218_OSR_User_manual_T4T_Field_app_EN_oct2023.pdf
The tech support is available at T4Tsupport@inventronicsglobal.com
Important note: This app is part of a system and provides no functionality as a stand-alone. To be able to work with this app, you need a compatible OSRAM OT LED driver with NFC interface. Contact your local INVENTRONICS sales representative for more information.
Updated on
Safety starts with understanding how developers collect and share your data. Data privacy and security practices may vary based on your use, region and age The developer provided this information and may update it over time.
No data shared with third parties
Learn more about how developers declare sharing
No data collected
Learn more about how developers declare collection
What's new
New logo: Inventronics
Programming from PF without DD file
Display data from PF
Read data sheet from QR code
Link to data sheet (interactive images)
AstroDIM settings: One level
Harmonized display: MonitoringData
Programming from PF without DD file
Display data from PF
Read data sheet from QR code
Link to data sheet (interactive images)
AstroDIM settings: One level
Harmonized display: MonitoringData
App support
About the developer
INVENTRONICS SRL
app.dev@inventronicsglobal.com
STRADA CASTAGNOLE 65/A
31100 TREVISO
Italy
+39 329 433 6687
