Potenza Drive (OBD2 ELM327)

Potenza Drive

About this app

Potenza Drive is an engine sound simulator that brings the most realistic car engine sounds and exhaust sounds produced by powerful cars inside your car.

The purest combination of car engine sounds and exhaust sounds that are recorded from real high performance cars with V8 engine sounds. Feel the pleasure of driving while experience delighted engine sounds that produce the same engine sound effect produced inside a supercar.

Plug an OBD-II ELM327 adapter (On-Board Diagnostic, OBD, OBD2 or OBDII) in your car to read throttle position, acceleration, speed, rev (engine RPM), torque, engine load, gear shift, brake, among others. The sounds are simulated based on the dynamic (mechanical) information of your car which is monitored in real time. The generated sound follows the variations of your car's engine and is played through your car's speakers.

Connect your smartphone to your car's audio system and hear through the speakers the absolute car engine sound experience.

FEATURES:
• Discover exotic car engine sounds with distinctive V8 engine sounds and exhaust sounds.
• Save your favorite car engine sound.
• Explosive Pop & Bang sounds.
• Portrait and landscape mode (use with a car phone holder).
• Listen to music player or navigation while driving.
• Enjoy engine sounds with the app in background.
• Resume engine sounds after incoming/outgoing call.
• Easy car tuning control of engine RPM idle and redline to scale factor the engine sounds.
• Save your OBD-II ELM327 paired device for the next sessions.
• Improve the engine sounds experience with "FAST COMMUNICATION" enabled in the app: most recent cars, support an OBD high speed communication (mandatory since 2008).
• Support for multiple OBD protocols or automatic protocol detection (when OBD protocol is unknown).

THE NEXT GENERATION IS HERE. Sound to your ears.

Love Potenza Drive?
Visit us: https://www.potenzadrive.com
Subscribe to our YouTube channel: https://bit.ly/PD2YaH2MF
Follow us on Instagram: https://bit.ly/PD3d9qdWk
─────────
REQUIREMENTS:
• Mobile device
• OBD-II ELM327 (Bluetooth, Wi-Fi or USB) adapter¹²
• Vehicle OBD-II protocol³
• Sound system⁴

For more detailed information, see the list of requirements: https://www.potenzadrive.com/requirements

IMPORTANT:
¹ The OBD-II adapter with ELM327 chip.
² Supported OBD-II protocols: SAE J1850 PWM, ISO 9141-2, ISO 14230-4 KWP, ISO 15765-4 CAN and SAE J1939 CAN.
³ Not compatible with Electric vehicles. May work on Hybrid while using Internal Combustion Engine.
⁴ AUX cable (3.5 mm jack) offers real-time audio and superior quality, while Bluetooth (A2DP) introduces up to 2 seconds of sound delay and lower quality (codecs). A powerful sound system is required for optimal reproduction of low frequencies (bass).

Note: OBD stands for On-Board Diagnostic and is a communication port used for car diagnostic/car scanner/car doctor/car repair.
─────────
Compatible with the following car manufacturers that are OBD-II compliant:
Abarth, Acura, Alfa Romeo, Aston Martin, Audi, Bentley, BMW, Bugatti, Buick, Cadillac, Chevrolet, Chrysler, Citroën, Corvette, Cupra, Dacia, Daewoo, Daihatsu, Dodge, DS Automobiles, Ferrari, Fiat, Ford, Geely, Genesis, GMC, Holden, Honda, Hummer, Hyundai, Infiniti, Isuzu, Jaguar, Jeep, Kia, Koenigsegg, KTM, Lada, Lamborghini, Lancia, Land Rover, Lexus, Lincoln, Lotus, Maserati, Maybach, Mazda, McLaren, Mercedes-Benz, MG, MINI, Mitsubishi, Nissan, Opel, Pagani, Peugeot, Polestar, Pontiac, Porsche, Renault, Rolls-Royce, Rover, Ruf, Saab, Seat, Skoda, Smart, Spyker, SsangYong, Subaru, Suzuki, Tata, Toyota, TVR, Vauxhall, Volkswagen, Volvo, Wiesmann.

Ratings and reviews

This is pretty cool and runs well on my Xtrons Android headunit. It would be good to add a switchable turbo spool up noise and add the option of a variety of blow off valves, wastegate flutter or even that chopping noise that seems to be all the rage. The other odd thing for me is that all of the sound seems to come through my sub and not through the car speakers, probably due to the frequency’s being in the low end. I’m toying with making an external sub with a fake exhaust as a port.

Fun and interesting app, easy to set up and use. I have my favourite two car sounds which work the best with my (real) engine. The sound is a definite enhancement and gets a few comments from friends family and hitch hikers. Recent issue with obd2 reported to the developer who responded straight away and fixed the issue within two days. Excellent support as always.

For starters this truly is a great app, when paired with bluetooth you do get noticeable lag, but using a obd2 usb cable its alot better....not perfect but better, it does drop the connection speed and freezes alot, my only suggestions would be to add more sounds and to optimise the connection even futher so there is no lag and more stable, keep up the good work, look forward to future updates.

What's new

🐛 Minor bug fixes. 🛠