Tiempos Ictus
100+
Downloads
Everyone
info
About this app
Introduction:
This application is designed to facilitate the registration of stroke code times and generate a chronometer in real time with the evolution of the process.
Installation and start:
Once installed on the device, The first time it is opened, we must configure the section PHASES (top right) that we want to fill. Depending on the work center and the staff, one or the other may be of interest. You can create new ones with the icon of "add", reorder them or eliminate existing ones (marking the red cross).
(For example, in our center we transfer patients who are subsidiaries of endovascular treatment to another center, so we remove the applications related to the times of the angiographer and keep those related to the ambulance transfer).
Data entry:
To enter the data of a patient, from the home screen, fill in the patient's identification (the text is free) and access NEW PATIENT.
The first CALL TIME screen will open. The rest of the screens will follow a similar dynamic:
We have to fill in the time of the desired phase.
We can do it by pressing:
- NOW (will enter the current time)
- 5M (will count 5 minutes from the current time)
-1H (1 hour ago).
- Or enter it manually, through the analog clock and calendar at the bottom.
Whatever the form of introduction, once selected it will appear in the lower part of the screen and we will have to give ACCEPT to go to the next screen.
We will perform the same steps with the rest of the phases of the Ictus code.
We can move between the different screens through the lower arrows, being able to omit some of the phases.
SPECIAL SITUATIONS:
Imagine that we want to fill a more advanced phase and leave the previous ones for later. Then we move with the arrows below between the different phases to fill the one we want.
If we introduce a date or time prior to the previous phase, the application will notify us that it is an error but it will end up saving both hours.
If we are wrong to put dates and times and some is prior to the previous one will be reflected in the summary that chronologically orders the steps.
Special attention must be paid to episodes that include the date change (episode that occurs around 00.00h). In these cases errors may appear in the calculations that are corrected by entering the hours correctly.
VISUALIZATION OF RESULTS
At any time of the process, we can click SUMMARY (above) and it will show us the summary of the data that we have taken so far.
Then you can go back to the introduction screens to complete or modify more results.
IF we have finished the study, we can give FINALIZE and it will show us the final summary.
Remember that if we give FINALIZE we can not modify that patient anymore.
How to access patients?
If it has not yet been completed, it will appear on the main screen with its identifier name.
(For example, if we have left the application with an unfinished patient).
If it has already been finalized it will appear when we activate in the main screen the SHOW FINISHED tab. From there we can access the patient through his identifier name.
Patients can be erased with a long press from the main menu.
This application is designed to facilitate the registration of stroke code times and generate a chronometer in real time with the evolution of the process.
Installation and start:
Once installed on the device, The first time it is opened, we must configure the section PHASES (top right) that we want to fill. Depending on the work center and the staff, one or the other may be of interest. You can create new ones with the icon of "add", reorder them or eliminate existing ones (marking the red cross).
(For example, in our center we transfer patients who are subsidiaries of endovascular treatment to another center, so we remove the applications related to the times of the angiographer and keep those related to the ambulance transfer).
Data entry:
To enter the data of a patient, from the home screen, fill in the patient's identification (the text is free) and access NEW PATIENT.
The first CALL TIME screen will open. The rest of the screens will follow a similar dynamic:
We have to fill in the time of the desired phase.
We can do it by pressing:
- NOW (will enter the current time)
- 5M (will count 5 minutes from the current time)
-1H (1 hour ago).
- Or enter it manually, through the analog clock and calendar at the bottom.
Whatever the form of introduction, once selected it will appear in the lower part of the screen and we will have to give ACCEPT to go to the next screen.
We will perform the same steps with the rest of the phases of the Ictus code.
We can move between the different screens through the lower arrows, being able to omit some of the phases.
SPECIAL SITUATIONS:
Imagine that we want to fill a more advanced phase and leave the previous ones for later. Then we move with the arrows below between the different phases to fill the one we want.
If we introduce a date or time prior to the previous phase, the application will notify us that it is an error but it will end up saving both hours.
If we are wrong to put dates and times and some is prior to the previous one will be reflected in the summary that chronologically orders the steps.
Special attention must be paid to episodes that include the date change (episode that occurs around 00.00h). In these cases errors may appear in the calculations that are corrected by entering the hours correctly.
VISUALIZATION OF RESULTS
At any time of the process, we can click SUMMARY (above) and it will show us the summary of the data that we have taken so far.
Then you can go back to the introduction screens to complete or modify more results.
IF we have finished the study, we can give FINALIZE and it will show us the final summary.
Remember that if we give FINALIZE we can not modify that patient anymore.
How to access patients?
If it has not yet been completed, it will appear on the main screen with its identifier name.
(For example, if we have left the application with an unfinished patient).
If it has already been finalized it will appear when we activate in the main screen the SHOW FINISHED tab. From there we can access the patient through his identifier name.
Patients can be erased with a long press from the main menu.
Updated on
Data safety
Developers can show information here about how their app collects and uses your data. Learn more about data safety
No information available
