KuttyPy : μSTEM Learning
1 Tsg.+
Downloads
Jedes Alter
info
Über diese App
The KuttyPy is an affordable microcontroller development board which can be interfaced with a laptop/phone to control real world devices in real time.
Common tasks include toggling digital Inputs/Outputs , ADC reading, motor control, and I2C sensor logging in real time via its enhanced bootloader.
After connecting the kuttyPy to your phone via an OTG cable, you can use this app to
- control 32 I/O pins
- read 8 channels of its 10 bit ADC
- Read/Write sensors connected to the I2C port, and visualize data via graphs/dials. BMP280 MS5611 INA219 ADS1115 HMC5883L TCS34725 TSL2561 TSL2591 MAX44009 AHT10 QMC5883L MPU6050 AK8963 MAX30100 VL53L0X
- Write visual code to create projects such as automatic water pump with water level sensing. generated javascript code can also be edited and run.
It can also be programmed with C code using our cloud based compiler
The android app is under active development, and several I2C sensors for pressure, angular velocity, distance , heart rate, humidity, luminosity, magnetic fields etc are already supported
This app is limited to Atmega32/168p/328p boards running the kuttypy firmware only. Bootloaders have been developed for the Atmega328p (Arduino Uno) and the Atmega328p(Nano) .
Common tasks include toggling digital Inputs/Outputs , ADC reading, motor control, and I2C sensor logging in real time via its enhanced bootloader.
After connecting the kuttyPy to your phone via an OTG cable, you can use this app to
- control 32 I/O pins
- read 8 channels of its 10 bit ADC
- Read/Write sensors connected to the I2C port, and visualize data via graphs/dials. BMP280 MS5611 INA219 ADS1115 HMC5883L TCS34725 TSL2561 TSL2591 MAX44009 AHT10 QMC5883L MPU6050 AK8963 MAX30100 VL53L0X
- Write visual code to create projects such as automatic water pump with water level sensing. generated javascript code can also be edited and run.
It can also be programmed with C code using our cloud based compiler
The android app is under active development, and several I2C sensors for pressure, angular velocity, distance , heart rate, humidity, luminosity, magnetic fields etc are already supported
This app is limited to Atmega32/168p/328p boards running the kuttypy firmware only. Bootloaders have been developed for the Atmega328p (Arduino Uno) and the Atmega328p(Nano) .
Aktualisiert am
Was die Sicherheit angeht, solltest du als Erstes verstehen, wie Entwickler deine Daten erheben und weitergeben. Die Datenschutz- und Sicherheitspraktiken können je nach deiner Verwendung, deiner Region und deinem Alter variieren. Diese Informationen wurden vom Entwickler zur Verfügung gestellt und können jederzeit von ihm geändert werden.
Keine Daten werden mit Drittunternehmen oder -organisationen geteilt
Keine Daten erhoben
Neuerungen
Internet of Things section under Visual Programming : transmit sensor measurements collected by kuttypy or your phone, to a world-map accessible at https://expeyes.scischool.in:4000/information
Links: Top right menu-> ExpEYES cloud
Links: Top right menu-> ExpEYES cloud
Support für diese App
Informationen zum Entwickler
CSPARK RESEARCH (OPC) PRIVATE LIMITED
jithinbp@gmail.com
1st floor, Off Part of 110-111-112, E-10-12 Triveni Complex
Jawahar Park Vikas Marg, Laxmi Nagar, East
New Delhi, Delhi 110075
India
+91 88511 00290
