Link Up configurator
500+
Downloads
Jedes Alter
info
Über diese App
The LinkUp Configurator is your veratron companion App to wirelessly configure your LinkUp gateway device in a snap.
UPGRADE YOUR ANALOGUE SENSORS TO NMEA 2000®
The veratron LinkUp gateways bring your analogue sensors to the NMEA 2000® network era.
All your boat’s data are now digitally available to be displayed on any NMEA 2000® enabled device.
Available in 5 variants to serve different scenario:
- Generic resistive (level sensors, temperature sensors, pressure sensors, …)
- Pyrometer
- Intelligent Battery Sensor (IBS)
- Combined Temp/Press sensor
- J1939
All NMEA 2000® certified!
PLUG-AND-PLAY INSTALLATION
The standard Micro-C M12 connector perfectly interfaces with the NMEA 2000® network without the need of additional adapters.
No dedicated power supply is required, the LinkUp gateway gets its power directly from the NMEA 2000® network!
The embedded LED notifies you the status of the device and its configuration at any time, reducing commissioning and troubleshooting time.
WIRELESS CONFIGURATION
The configuration of the LinkUp devices has never been so easy.
Launch the App and define your settings through the user-friendly interface, then simply hold your mobile device in proximity of the LinkUp to transfer the configuration.
Thanks to the embedded passive antenna the configuration can be done powerless!
Discover more on www.veratron.com
UPGRADE YOUR ANALOGUE SENSORS TO NMEA 2000®
The veratron LinkUp gateways bring your analogue sensors to the NMEA 2000® network era.
All your boat’s data are now digitally available to be displayed on any NMEA 2000® enabled device.
Available in 5 variants to serve different scenario:
- Generic resistive (level sensors, temperature sensors, pressure sensors, …)
- Pyrometer
- Intelligent Battery Sensor (IBS)
- Combined Temp/Press sensor
- J1939
All NMEA 2000® certified!
PLUG-AND-PLAY INSTALLATION
The standard Micro-C M12 connector perfectly interfaces with the NMEA 2000® network without the need of additional adapters.
No dedicated power supply is required, the LinkUp gateway gets its power directly from the NMEA 2000® network!
The embedded LED notifies you the status of the device and its configuration at any time, reducing commissioning and troubleshooting time.
WIRELESS CONFIGURATION
The configuration of the LinkUp devices has never been so easy.
Launch the App and define your settings through the user-friendly interface, then simply hold your mobile device in proximity of the LinkUp to transfer the configuration.
Thanks to the embedded passive antenna the configuration can be done powerless!
Discover more on www.veratron.com
Aktualisiert am
Was die Sicherheit angeht, solltest du als Erstes verstehen, wie Entwickler deine Daten erheben und weitergeben. Die Datenschutz- und Sicherheitspraktiken können je nach deiner Verwendung, deiner Region und deinem Alter variieren. Diese Informationen wurden vom Entwickler zur Verfügung gestellt und können jederzeit von ihm geändert werden.
Keine Daten werden mit Drittunternehmen oder -organisationen geteilt
Keine Daten erhoben
Neuigkeiten
- Targetting Android 15
Support für diese App
Informationen zum Entwickler
VERATRON AG
service@veratron.com
Industriestrasse 18
9464 Rüthi (Rheintal)
Switzerland
+41 79 950 22 70
