Brainlink Wave Generator
1 Tsg.+
Downloads
Jedes Alter
info
Über diese App
If you have a Brainlink device and have installed the 1.06 or newer custom firmware via the Brainlink Firmware Uploader app, your Brainlink now has a two-channel sine/triangle/square/arbitrary wave generator that can go up to around 100-200kHz. This very simple wrapper app controls that generator.
Be careful not to exceed 20mA current draw on the Brainlink (so if you hook up to a 50ohm output, say, make sure you reduce amplitude to 1V or lower in accordance with Ohm's Law). There are no safety features in this app. It's designed for hobbyists who know what they are doing.
The Brainlink's DAC ports are unipolar. To get bipolar output from a port, stick a capacitor on it (0.1microfarad worked for me).
For instructions on how to use this, see:
instructables.com/id/Bluetooth-100kHz-two-channel-function-generator/
Source code at github.com/arpruss
Be careful not to exceed 20mA current draw on the Brainlink (so if you hook up to a 50ohm output, say, make sure you reduce amplitude to 1V or lower in accordance with Ohm's Law). There are no safety features in this app. It's designed for hobbyists who know what they are doing.
The Brainlink's DAC ports are unipolar. To get bipolar output from a port, stick a capacitor on it (0.1microfarad worked for me).
For instructions on how to use this, see:
instructables.com/id/Bluetooth-100kHz-two-channel-function-generator/
Source code at github.com/arpruss
Aktualisiert am
Was die Sicherheit angeht, solltest du als Erstes verstehen, wie Entwickler deine Daten erheben und weitergeben. Die Datenschutz- und Sicherheitspraktiken können je nach deiner Verwendung, deiner Region und deinem Alter variieren. Diese Informationen wurden vom Entwickler zur Verfügung gestellt und können jederzeit von ihm geändert werden.
Keine Daten werden mit Drittunternehmen oder -organisationen geteilt
Keine Daten erhoben
Neuigkeiten
Fix crash on devices without any paired Bluetooth devices.
