StringerPro: Stair Calculator
Contient des annoncesAchats via l'appli
Tout public
info
1K+
Téléchargements
Tout public
En savoir plus
À propos de l'application
StringerPro turns total rise + total run into a code-checked, ready-to-cut stair stringer layout.
Built for finish carpenters, framers, and deck builders who want one tool that does the stringer job exceptionally well -- not nine bundled calculators that all forget the bottom step.
KEY FEATURES
- Fraction-native input. Feet + whole inches + sixteenths picker that feels as fast as a dedicated construction calculator. Common stops (0, 1/4, 1/2, 3/4) are one tap.
- IRC R311.7 code validation. Real-time green / yellow / red badges for riser height (max 7-3/4"), tread depth (min 10"), variance (max 3/8"), 2x12 throat (min 3-1/2"), comfort (rise + tread sum), and pitch angle.
- Bottom step done right. The bottom riser is automatically shortened by the tread thickness so walking rises stay uniform once treads are installed -- a common source of uneven steps.
- Side-view diagram with all dimensions labeled. No 3D gimmicks -- just a clean 2D elevation that prints cleanly.
- Framing-square cut sheet. Step-by-step heel positions along the top edge of the 2x12, with rise leg + run leg dimensions for every notch, plus end cuts for the seat and plumb cuts.
- 1:1 print template. Tile the side view across letter or A4 pages at full scale, tape together, and trace directly onto the 2x12. Crop marks on every corner.
- Material estimator. Stringer count, stair width, and lumber prices in -- linear footage and total job cost out, including fasteners.
- Saved jobs. Job name, address, photo, and notes. One saved job on the standard tier; unlimited with premium.
- Deck stair mode. Deck-board nosing standard, concrete-pad seat cut, IRC R311.7.5 deck stair rules.
- Imperial + metric, light + dark + jobsite high-contrast themes.
- 7-day full premium trial on first install.
PREMIUM (one-time unlock, no subscription)
- Unlimited saved jobs with photos
- All three PDF exports (summary, cut sheet, 1:1 print template)
- Material estimator
- Removes ads
- Custom default thicknesses
- Jobsite high-contrast theme
DISCLAIMER
Verify all measurements before cutting. Output is for estimation only. Local building codes may vary.
Built for finish carpenters, framers, and deck builders who want one tool that does the stringer job exceptionally well -- not nine bundled calculators that all forget the bottom step.
KEY FEATURES
- Fraction-native input. Feet + whole inches + sixteenths picker that feels as fast as a dedicated construction calculator. Common stops (0, 1/4, 1/2, 3/4) are one tap.
- IRC R311.7 code validation. Real-time green / yellow / red badges for riser height (max 7-3/4"), tread depth (min 10"), variance (max 3/8"), 2x12 throat (min 3-1/2"), comfort (rise + tread sum), and pitch angle.
- Bottom step done right. The bottom riser is automatically shortened by the tread thickness so walking rises stay uniform once treads are installed -- a common source of uneven steps.
- Side-view diagram with all dimensions labeled. No 3D gimmicks -- just a clean 2D elevation that prints cleanly.
- Framing-square cut sheet. Step-by-step heel positions along the top edge of the 2x12, with rise leg + run leg dimensions for every notch, plus end cuts for the seat and plumb cuts.
- 1:1 print template. Tile the side view across letter or A4 pages at full scale, tape together, and trace directly onto the 2x12. Crop marks on every corner.
- Material estimator. Stringer count, stair width, and lumber prices in -- linear footage and total job cost out, including fasteners.
- Saved jobs. Job name, address, photo, and notes. One saved job on the standard tier; unlimited with premium.
- Deck stair mode. Deck-board nosing standard, concrete-pad seat cut, IRC R311.7.5 deck stair rules.
- Imperial + metric, light + dark + jobsite high-contrast themes.
- 7-day full premium trial on first install.
PREMIUM (one-time unlock, no subscription)
- Unlimited saved jobs with photos
- All three PDF exports (summary, cut sheet, 1:1 print template)
- Material estimator
- Removes ads
- Custom default thicknesses
- Jobsite high-contrast theme
DISCLAIMER
Verify all measurements before cutting. Output is for estimation only. Local building codes may vary.
IRC-checked stair stringer layouts. Fraction-native. Printable cut sheets.
Date de mise à jour
Sélection d'actualités
La sécurité, c'est d'abord comprendre comment les développeurs collectent et partagent vos données. Les pratiques concernant leur confidentialité et leur protection peuvent varier selon votre utilisation, votre région et votre âge. Le développeur a fourni ces informations et peut les modifier ultérieurement.
- Cette appli peut partager ces types de données avec des tiersID de l'appareil ou autres ID
- Cette appli peut recueillir ces types de donnéesActivité dans l'application, Infos et performance des applis, ID de l'appareil ou autres ID
- Les données sont chiffrées lors de leur transfert
- Vous pouvez demander la suppression des données
Nouveautés
Fixed a crash when tapping a row on the measurement wheels.
The measurement picker now fits shorter phone screens, so Cancel and Use are always visible.
More reliable start-up when Google Play is slow to respond.
The measurement picker now fits shorter phone screens, so Cancel and Use are always visible.
More reliable start-up when Google Play is slow to respond.
Tout public
En savoir plusAssistance de l'appli
À propos du développeur
ISOLUTION TECHNOLOGIES LTD
hello@clearstackapps.com
124-128 City Road
LONDON
EC1V 2NX
United Kingdom
+1 657-229-2693
