TrueOffset - Pipe & Conduit
Contient des annoncesAchats via l'appli
Tout public
info
0+
Téléchargements
À propos de l'application
The pipe offset calculator that stays out of your way: travel, run, rolling offsets, cut lengths and mitered elbows, drawn from your numbers, with no ads jumping in front of them.
NO POP-UP ADS. EVER.
One small banner at the bottom, hidden while you type. No full-screen ads, no videos, nothing that clears your numbers when you hit a button.
SEE THE OFFSET BEFORE YOU CUT
Every result comes with a drawing: the offset with its travel and run, the rolling offset seen along the pipe and from the side, each segment of a mitered elbow, the parallel runs with their start marks, the drain slope over its run. Change a number and the drawing follows.
TYPE IT LIKE YOUR TAPE READS
14 1/2", 5' 3 1/2", 3/4", 2.5m — feet, inches and fractions just work. Results come out to the nearest 1/16" (or 1/8", 1/32") with feet-and-inches next to long lengths. Prefer big keys? Turn on the app keypad in Settings: ft, in, fractions and Next, easy with gloves.
PIPE TOOLS
• Pipe offset — travel and run for 11¼°, 22½°, 30°, 45°, 60° or any angle, with the multipliers
• Rolling offset — true offset, travel, run and how far to roll the fitting; or the fitting angle for a set run
• Parallel offsets — several pipes through the same offset: where each next pipe starts so the spacing stays equal
• Cut length — center-to-center minus both fitting take-outs and the weld gaps, plus the take-out of an elbow cut to any angle
• Mitered elbow — segmented elbow from straight pipe: cut angle, long and short side of every segment, end pieces and take-out
• Pipe slope — drop over a run at ¼", ⅛" or any slope per foot, or the slope from a measured drop, with the IPC Table 704.1 minimums for the drain size
Offsets work the same for conduit: the travel is the distance between your bend marks.
ALSO IN THE BOX
• Feet-inch fraction calculator (tape measure math)
• Right triangle & squaring with the 3-4-5 check
• Construction unit converter
• Bubble level and inclinometer
BUILT FOR THE JOB SITE
• Works offline — basement, crawl space, mechanical room with no signal
• High-contrast mode for full sun, plus dark mode
• Screen stays on while a calculator is open
• Remembers what you typed and keeps a history of your calculations
• Star the calculators you use most to pin them to the top
• Share any result by text or email
• English and Spanish, switch any time in Settings
No account, no sign-up, nothing leaves your phone.
WHY CLEAN SCREEN APPS
I got tired of apps that throw full-screen ads at you in the middle of a job, so I build apps with no pop-up ads. TrueOffset is the second one, after TrueSquare Calc.
Questions or a calculator you'd like added: xufengce209@gmail.com
Results are estimates. Check your fittings' take-out dimensions and your local plumbing and electrical codes before you cut.
NO POP-UP ADS. EVER.
One small banner at the bottom, hidden while you type. No full-screen ads, no videos, nothing that clears your numbers when you hit a button.
SEE THE OFFSET BEFORE YOU CUT
Every result comes with a drawing: the offset with its travel and run, the rolling offset seen along the pipe and from the side, each segment of a mitered elbow, the parallel runs with their start marks, the drain slope over its run. Change a number and the drawing follows.
TYPE IT LIKE YOUR TAPE READS
14 1/2", 5' 3 1/2", 3/4", 2.5m — feet, inches and fractions just work. Results come out to the nearest 1/16" (or 1/8", 1/32") with feet-and-inches next to long lengths. Prefer big keys? Turn on the app keypad in Settings: ft, in, fractions and Next, easy with gloves.
PIPE TOOLS
• Pipe offset — travel and run for 11¼°, 22½°, 30°, 45°, 60° or any angle, with the multipliers
• Rolling offset — true offset, travel, run and how far to roll the fitting; or the fitting angle for a set run
• Parallel offsets — several pipes through the same offset: where each next pipe starts so the spacing stays equal
• Cut length — center-to-center minus both fitting take-outs and the weld gaps, plus the take-out of an elbow cut to any angle
• Mitered elbow — segmented elbow from straight pipe: cut angle, long and short side of every segment, end pieces and take-out
• Pipe slope — drop over a run at ¼", ⅛" or any slope per foot, or the slope from a measured drop, with the IPC Table 704.1 minimums for the drain size
Offsets work the same for conduit: the travel is the distance between your bend marks.
ALSO IN THE BOX
• Feet-inch fraction calculator (tape measure math)
• Right triangle & squaring with the 3-4-5 check
• Construction unit converter
• Bubble level and inclinometer
BUILT FOR THE JOB SITE
• Works offline — basement, crawl space, mechanical room with no signal
• High-contrast mode for full sun, plus dark mode
• Screen stays on while a calculator is open
• Remembers what you typed and keeps a history of your calculations
• Star the calculators you use most to pin them to the top
• Share any result by text or email
• English and Spanish, switch any time in Settings
No account, no sign-up, nothing leaves your phone.
WHY CLEAN SCREEN APPS
I got tired of apps that throw full-screen ads at you in the middle of a job, so I build apps with no pop-up ads. TrueOffset is the second one, after TrueSquare Calc.
Questions or a calculator you'd like added: xufengce209@gmail.com
Results are estimates. Check your fittings' take-out dimensions and your local plumbing and electrical codes before you cut.
Pipe offsets, rolling offsets & mitered elbows, with diagrams. No pop-up ads.
Date de mise à jour
La sécurité, c'est d'abord comprendre comment les développeurs collectent et partagent vos données. Les pratiques concernant leur confidentialité et leur protection peuvent varier selon votre utilisation, votre région et votre âge. Le développeur a fourni ces informations et peut les modifier ultérieurement.
Nouveautés
• New in Settings: Share & rate. Recommend TrueOffset to a coworker or rate it on Google Play.
• More apps from Clean Screen Apps: TrueSquare Calc (construction), Punchwise (time card), Bracket Maker.
• Remove ads has a launch price for a limited time.
• Smaller, faster app.
• More apps from Clean Screen Apps: TrueSquare Calc (construction), Punchwise (time card), Bracket Maker.
• Remove ads has a launch price for a limited time.
• Smaller, faster app.
Assistance de l'appli
À propos du développeur
XUFENG CE
xufengce209@gmail.com
3704 Massey Pond Trail
Raleigh, NC 27616-9120
United States
