UART Terminal
1ହ+
ଡାଉନଲୋଡଗୁଡ଼ିକ
ସମସ୍ତେ
info
ଏହି ଆପ୍ ବିଷୟରେ
Serial port (UART) Terminal to communicate with embedded devices / boards.
Supported boards / chips:
Arduino (original and clones)
ESP8266 boards
ESP32 boards
NodeMCU
ESP32-CAM-MB
STM32 Nucleo-64 (ST-LINK/V2-1)
FTDI
PL2303
CP210x
CH34x
many CDC ACM devices
Connection:
Phone must have USB OTG function and be able to provide power to the connected USB device (most phones nowadays).
Use USB OTG adapter cable (test the adapter works by connecting a computer mouse).
Use normal USB cable to connect your embedded board to the OTG adapter.
Note: symmetrical USB C - USB C cable might not work. Use normal cable and OTG adapter.
User can select ASCII / HEX mode separately for terminal screen and command input.
User can also select the command ending (the characters to append at the end of each command).
Local echo option: to also see what you sent.
Baud Rate selection: any integer number, not limited by app, but make sure the connected device supports what you enter.
Char Delay option: for slow MCUs - wait a given number of milliseconds after each sent byte, so the connected MCU has enough time to process it.
Make sure your connected device is supported, before buying this app !!!
You can test it with our free app TCPUART
https://play.google.com/store/apps/details?id=com.hardcodedjoy.tcpuart
Enjoy :)
End-User License Agreement:
https://www.hardcodedjoy.com/app-eula?id=com.hardcodedjoy.uartterminal
Supported boards / chips:
Arduino (original and clones)
ESP8266 boards
ESP32 boards
NodeMCU
ESP32-CAM-MB
STM32 Nucleo-64 (ST-LINK/V2-1)
FTDI
PL2303
CP210x
CH34x
many CDC ACM devices
Connection:
Phone must have USB OTG function and be able to provide power to the connected USB device (most phones nowadays).
Use USB OTG adapter cable (test the adapter works by connecting a computer mouse).
Use normal USB cable to connect your embedded board to the OTG adapter.
Note: symmetrical USB C - USB C cable might not work. Use normal cable and OTG adapter.
User can select ASCII / HEX mode separately for terminal screen and command input.
User can also select the command ending (the characters to append at the end of each command).
Local echo option: to also see what you sent.
Baud Rate selection: any integer number, not limited by app, but make sure the connected device supports what you enter.
Char Delay option: for slow MCUs - wait a given number of milliseconds after each sent byte, so the connected MCU has enough time to process it.
Make sure your connected device is supported, before buying this app !!!
You can test it with our free app TCPUART
https://play.google.com/store/apps/details?id=com.hardcodedjoy.tcpuart
Enjoy :)
End-User License Agreement:
https://www.hardcodedjoy.com/app-eula?id=com.hardcodedjoy.uartterminal
ଗତ ଅପଡେଟର ସମୟ
ଡେଭେଲପରମାନେ ଆପଣଙ୍କ ଡାଟାକୁ କିପରି ସଂଗ୍ରହ ଏବଂ ସେୟାର କରନ୍ତି ସେହି ଧାରଣା ସହିତ ସୁରକ୍ଷା ଆରମ୍ଭ ହୁଏ। ଆପଣଙ୍କ ବ୍ୟବହାର, ଅଞ୍ଚଳ ଏବଂ ବୟସ ଆଧାରରେ, ଡାଟା ଗୋପନୀୟତା ଓ ସୁରକ୍ଷା କାର୍ଯ୍ୟପଦ୍ଧତିଗୁଡ଼ିକ ଭିନ୍ନ ହୋଇପାରେ। ଡେଭେଲପର ଏହି ସୂଚନା ପ୍ରଦାନ କରିଛନ୍ତି ଏବଂ ସେ ସମୟାନୁସାରେ ଏହାକୁ ଅପଡେଟ କରିପାରନ୍ତି।
ତୃତୀୟ ପକ୍ଷଗୁଡ଼ିକ ସହ କୌଣସି ଡାଟା ସେୟାର କରାଯାଇନାହିଁ
ଡେଭେଲପରମାନେ କିପରି ସେୟାରିଂର ଘୋଷଣା କରନ୍ତି ସେ ବିଷୟରେ ଅଧିକ ଜାଣନ୍ତୁ
କୌଣସି ଡାଟା ସଂଗ୍ରହ କରାଯାଇନାହିଁ
ଡେଭେଲପରମାନେ କିପରି ସଂଗ୍ରହର ଘୋଷଣା କରନ୍ତି ସେ ବିଷୟରେ ଅଧିକ ଜାଣନ୍ତୁ
ନୂଆ କଣ ଅଛି
Fixed bug in USB drivers.
More boards are supported now, including ST-LINK/V2-1 found on STM32 Nucleo-64 boards.
More boards are supported now, including ST-LINK/V2-1 found on STM32 Nucleo-64 boards.
ଆପ ସପୋର୍ଟ
ଡେଭେଲପରଙ୍କ ବିଷୟରେ
HARDCODED JOY SRL
contact@hardcodedjoy.com
STR. RUSCIORULUI NR. 46 AP. 18
550112 SIBIU
Romania
+40 756 396 676
