Brainlink Wave Generator
1ହ+
ଡାଉନଲୋଡଗୁଡ଼ିକ
ସମସ୍ତେ
info
ଏହି ଆପ୍ ବିଷୟରେ
If you have a Brainlink device and have installed the 1.06 or newer custom firmware via the Brainlink Firmware Uploader app, your Brainlink now has a two-channel sine/triangle/square/arbitrary wave generator that can go up to around 100-200kHz. This very simple wrapper app controls that generator.
Be careful not to exceed 20mA current draw on the Brainlink (so if you hook up to a 50ohm output, say, make sure you reduce amplitude to 1V or lower in accordance with Ohm's Law). There are no safety features in this app. It's designed for hobbyists who know what they are doing.
The Brainlink's DAC ports are unipolar. To get bipolar output from a port, stick a capacitor on it (0.1microfarad worked for me).
For instructions on how to use this, see:
instructables.com/id/Bluetooth-100kHz-two-channel-function-generator/
Source code at github.com/arpruss
Be careful not to exceed 20mA current draw on the Brainlink (so if you hook up to a 50ohm output, say, make sure you reduce amplitude to 1V or lower in accordance with Ohm's Law). There are no safety features in this app. It's designed for hobbyists who know what they are doing.
The Brainlink's DAC ports are unipolar. To get bipolar output from a port, stick a capacitor on it (0.1microfarad worked for me).
For instructions on how to use this, see:
instructables.com/id/Bluetooth-100kHz-two-channel-function-generator/
Source code at github.com/arpruss
ଗତ ଅପଡେଟର ସମୟ
ଡେଭେଲପରମାନେ ଆପଣଙ୍କ ଡାଟାକୁ କିପରି ସଂଗ୍ରହ ଏବଂ ସେୟାର କରନ୍ତି ସେହି ଧାରଣା ସହିତ ସୁରକ୍ଷା ଆରମ୍ଭ ହୁଏ। ଆପଣଙ୍କ ବ୍ୟବହାର, ଅଞ୍ଚଳ ଏବଂ ବୟସ ଆଧାରରେ, ଡାଟା ଗୋପନୀୟତା ଓ ସୁରକ୍ଷା ପ୍ରାକ୍ଟିସ ଭିନ୍ନ ହୋଇପାରେ। ଡେଭେଲପର ଏହି ସୂଚନା ପ୍ରଦାନ କରିଛନ୍ତି ଏବଂ ସେ ସମୟାନୁସାରେ ଏହାକୁ ଅପଡେଟ କରିପାରନ୍ତି।
ତୃତୀୟ ପକ୍ଷଗୁଡ଼ିକ ସହ କୌଣସି ଡାଟା ସେୟାର କରାଯାଇନାହିଁ
ଡେଭେଲପରମାନେ କିପରି ସେୟାରିଂର ଘୋଷଣା କରନ୍ତି ସେ ବିଷୟରେ ଅଧିକ ଜାଣନ୍ତୁ
କୌଣସି ଡାଟା ସଂଗ୍ରହ କରାଯାଇନାହିଁ
ଡେଭେଲପରମାନେ କିପରି ସଂଗ୍ରହର ଘୋଷଣା କରନ୍ତି ସେ ବିଷୟରେ ଅଧିକ ଜାଣନ୍ତୁ
ନୂଆ କଣ ଅଛି
Fix crash on devices without any paired Bluetooth devices.
