NBL Level

NEXT BRIDGE

About this app

NBL Level is a dedicated BLE remote panel app for the NBL Level differential pressure liquid level sensor.

Important: This app is designed to be used with NBL Level sensor hardware. You can preview the full screen and flow in Demo mode without the sensor.

Key Features

Real-time Precision Monitoring
- Real-time display of tank level in mm; simultaneous viewing of percentage and 5-level (L0-L4) status
- Unit selection: mm default; switch to cm or m at any time

Automatic Guide Calibration
- Calibration completed via a 2-step fill and drain sweep after entering tank height
- Automatic distribution of 5-level setpoints based on the measurement range

Multi-Device Management
- Register sensors from multiple tanks in a single app and check connection status at a glance
- Automatic scanning, automatic connection, and automatic reconnection upon disconnection

Level Customization
- Directly set threshold values ​​(L1-L3) for each level
- Easy field identification by changing device names

Demo Mode
- Experience the entire monitoring, calibration, and setting process using simulation data without hardware

Target Users

This is a professional app for engineers and operators who require precise measurement and management of tank liquid levels.

Requirements
- NBL Level BLE liquid level sensor (sensor not required for Demo Mode)
- Bluetooth Low Energy supported device, Bluetooth permissions required for searching for nearby devices

What’s new

First release of NBL Level.

- Connect to tank level sensors over BLE for real time readings
- Level in millimeters, with percentage and five setpoints (L0-L4)
- Switch units between mm, cm, and m
- Auto calibration: fill, then drain to map the measured range
- Register multiple devices, switch quickly, auto-reconnect on drops
- Demo mode to try the app without a sensor