PoolPilot – Cockpit
In-app purchases
Everyone
info
10+
Downloads
About this app
Finally, a native app for your pool controller.
PoolPilot shows pH, ORP and temperature at a glance, switches relays, dosing, pump, heater and light, and controls the pool cover — straight over your local network, your existing remote access and/or the PoolPilot Relay. You add a connection profile and PoolPilot automatically detects whether it's a ProCon.IP, a VIOLET or a BADU Blue behind it.
ONE APP, EVERY CONTROLLER
As an independent companion app, PoolPilot supports the ProCon.IP and VIOLET pool controllers (PoolDigital) and BADU Blue (SPECK). The app adapts automatically to whichever controller you have.
EVERYTHING UNDER CONTROL — IN FOUR TABS
• Dashboard: your headline values and switches at a glance. Just mark your favourites — it starts empty, you decide what goes on it.
• Measurements: all sensors grouped, with colour-coded chemistry indicators, custom ordering and per-sensor visibility, several gauge styles per value and adjustable ranges. pH, ORP, chlorine and temperatures, each with target and limit values.
• Switches: control lighting, dose manually, open & close the pool cover, switch relays (with a timer via long-press) and more.
• Settings: dosing control, heater and solar absorber, time control and light scenes — right in the app.
MORE THAN JUST READING
• History: pH, ORP, chlorine and temperature over 24 h, 48 h or 7 days — see trends, not guess.
• Home & Lock Screen widgets: your pool at a glance, without opening the app.
• Wear OS: a dedicated app, watch face complications and a quick access tile.
• Light scenes: manage dimmers or RGB(W) lamps (DMX512) with convenient colour pickers.
• Multi-profile: create several profiles, e.g. for whirlpool, indoor and outdoor pool — switch any time.
• App lock with Face ID / Touch ID and device PIN
• Alternative app icons &, custom backgrounds
• Built-in demo mode to try everything — with no pool controller at all.
ACCESS FROM ANYWHERE
Whether on your local network or over the internet: VIOLET brings remote access and push out of the box, and the PoolPilot Relay easily adds both for ProCon.IP and BADU Blue too — a small agent on your own hardware (e.g. a Raspberry Pi) that opens an encrypted tunnel to the PoolPilot Cloud in a German data centre. No port forwarding, no DynDNS, and your credentials stay on your own hardware. Push notifications for all the important events included.
NO ACCOUNT · NO ADS · NO TRACKING
For local use you need no account and no cloud. Credentials are never stored in the cloud, everything runs through anonymous IDs — no names, no emails, no connection history, no IP logs. Your data simply isn't exploited.
POOLPILOT PRO
Viewing values is free. Full control (switching, dosing, the cover, all configuration, widgets, Wear OS, the Relay, sharing) comes with PoolPilot Pro. After your first connection to your pool controller, all Pro features are yours for 7 days automatically — no subscription, no cost, nothing to cancel. The one exception during those 7 days: setting up your own Relay requires a subscription. After the 7 days, keep using the free features or subscribe to PoolPilot Pro (1-month free trial for new subscribers, then auto-renewing, cancel any time). Via the Relay a profile and its Pro features can be shared with your own device plus up to 10 more (including Apple devices).
NATIVE ON EVERY DEVICE
The same app on your Android phone, tablet and Wear OS — fully native, identical to use.
Built in Germany.
Independent project — no official affiliation or partnership with PoolDigital GmbH & Co. KG or SPECK Pumpen Verkaufsgesellschaft GmbH. "ProCon.IP", "VIOLET" and "BADU" are trademarks or product names of their respective manufacturers.
PoolPilot shows pH, ORP and temperature at a glance, switches relays, dosing, pump, heater and light, and controls the pool cover — straight over your local network, your existing remote access and/or the PoolPilot Relay. You add a connection profile and PoolPilot automatically detects whether it's a ProCon.IP, a VIOLET or a BADU Blue behind it.
ONE APP, EVERY CONTROLLER
As an independent companion app, PoolPilot supports the ProCon.IP and VIOLET pool controllers (PoolDigital) and BADU Blue (SPECK). The app adapts automatically to whichever controller you have.
EVERYTHING UNDER CONTROL — IN FOUR TABS
• Dashboard: your headline values and switches at a glance. Just mark your favourites — it starts empty, you decide what goes on it.
• Measurements: all sensors grouped, with colour-coded chemistry indicators, custom ordering and per-sensor visibility, several gauge styles per value and adjustable ranges. pH, ORP, chlorine and temperatures, each with target and limit values.
• Switches: control lighting, dose manually, open & close the pool cover, switch relays (with a timer via long-press) and more.
• Settings: dosing control, heater and solar absorber, time control and light scenes — right in the app.
MORE THAN JUST READING
• History: pH, ORP, chlorine and temperature over 24 h, 48 h or 7 days — see trends, not guess.
• Home & Lock Screen widgets: your pool at a glance, without opening the app.
• Wear OS: a dedicated app, watch face complications and a quick access tile.
• Light scenes: manage dimmers or RGB(W) lamps (DMX512) with convenient colour pickers.
• Multi-profile: create several profiles, e.g. for whirlpool, indoor and outdoor pool — switch any time.
• App lock with Face ID / Touch ID and device PIN
• Alternative app icons &, custom backgrounds
• Built-in demo mode to try everything — with no pool controller at all.
ACCESS FROM ANYWHERE
Whether on your local network or over the internet: VIOLET brings remote access and push out of the box, and the PoolPilot Relay easily adds both for ProCon.IP and BADU Blue too — a small agent on your own hardware (e.g. a Raspberry Pi) that opens an encrypted tunnel to the PoolPilot Cloud in a German data centre. No port forwarding, no DynDNS, and your credentials stay on your own hardware. Push notifications for all the important events included.
NO ACCOUNT · NO ADS · NO TRACKING
For local use you need no account and no cloud. Credentials are never stored in the cloud, everything runs through anonymous IDs — no names, no emails, no connection history, no IP logs. Your data simply isn't exploited.
POOLPILOT PRO
Viewing values is free. Full control (switching, dosing, the cover, all configuration, widgets, Wear OS, the Relay, sharing) comes with PoolPilot Pro. After your first connection to your pool controller, all Pro features are yours for 7 days automatically — no subscription, no cost, nothing to cancel. The one exception during those 7 days: setting up your own Relay requires a subscription. After the 7 days, keep using the free features or subscribe to PoolPilot Pro (1-month free trial for new subscribers, then auto-renewing, cancel any time). Via the Relay a profile and its Pro features can be shared with your own device plus up to 10 more (including Apple devices).
NATIVE ON EVERY DEVICE
The same app on your Android phone, tablet and Wear OS — fully native, identical to use.
Built in Germany.
Independent project — no official affiliation or partnership with PoolDigital GmbH & Co. KG or SPECK Pumpen Verkaufsgesellschaft GmbH. "ProCon.IP", "VIOLET" and "BADU" are trademarks or product names of their respective manufacturers.
Native app for ProCon.IP, VIOLET & BADU Blue — read, switch, control your pool
Updated on
Safety starts with understanding how developers collect and share your data. Data privacy and security practices may vary based on your use, region, and age. The developer provided this information and may update it over time.
- No data shared with third partiesLearn more about how developers declare sharing
- This app may collect these data typesPersonal info, Financial info, and App info and performance
- Data is encrypted in transit
- You can request that data be deleted
What’s new
New: free Pro is explained openly in a notice and in the subscription settings.
Fixed: without Pro, controller settings are now read-only as intended. A demo pool no longer starts the free Pro period. Removing a paired device now also ends its household membership. Household joins no longer use up the invite after a brief connection drop. VIOLET push uses a toggle. Home-screen widgets no longer turn into another widget type.
Fixed: without Pro, controller settings are now read-only as intended. A demo pool no longer starts the free Pro period. Removing a paired device now also ends its household membership. Household joins no longer use up the invite after a brief connection drop. VIOLET push uses a toggle. Home-screen widgets no longer turn into another widget type.
App support
About the developer
Yannic Alexander Labonte
yannic.labonte@gmail.com
Webergasse 3
40668 Meerbusch
Germany