893 reviews
Content rating
Screenshot image
Screenshot image
Screenshot image
Screenshot image
Screenshot image
Screenshot image
Screenshot image
Screenshot image
Screenshot image
Screenshot image
Screenshot image
Screenshot image
Screenshot image

About this app

Full version of ScanMyOpel software for Opel/Vauxhall diagnostics.
It is primarily targeted for Opel car enthusiasts to let them diagnose their own cars.

!!!!Models with CAN bus (Astra H, Vectra C, Astra J, Insignia, Zafira-B, etc) are not supported by this application!!!!! Please do NOT leave low rating review only because you could not find these models! For you newer models you can use our another application ScanMyOpelCAN:

Now in English, Russian, Hungarian, Polish, German, Finnish, Spanish, Czech and Italian!

Now with Engine, Automatic transmission, ABS, SRS, Power Steering diagnostic and BCM support! Please note, due to ELM327 adapter limitation not all modules can be supported on all models.

The only Opel/Vauxhall/Holden diagnostic tool for Android!

ScanMyOpel features include:
- native support of Electronic control units used in Opel/Vauxhall cars, which distinguishes ScanMyOpel from many other diagnostic applications providing only limited generic OBDII support
- monitoring various dynamic parameters of engine, automatic transmission, ABS, EHPS and other ECUs
- reading of static data: ECU identification, fault codes with their current statuses and symptoms
- clearing of fault codes
- Displaying environment information on trouble codes where applicable
- Displaying nominal values of livedata parameters where applicable
- Displaying Livedata parameters charts (only 5 charts can be viewed simultaneously)
- Actuator tests for selected ECUs.

Fault code status meanings:
red - present
yellow - intermittent
green - not present

NEW Long press on any trouble code in the app will open internal browser with Google.

Current software version supports ONLY the following Opel/Vauxhall models:
- Agila A
- Astra F (MY96+)
- Astra G
- Corsa B (MY97+)
- Corsa C
- Frontera A (25TDS engine only)
- Frontera B (X22DTH/Y22DTH engines only)
- Meriva A
- Omega B (MY97+, X25XE/X30XE/X20SE/Y25DT engines are NOT supported)
- Speedster
- Tigra (MY97+)
- Tigra B
- Vectra B
- Zafira A

The ECU type is detected automatically.

During actuator tests it is possible to monitor livedata parameters. Actuator test lasts 30 seconds, then it stops automatically. User can stop test at any time before 30 seconds expired.

The app requires a Wi-Fi or Bluetooth OBD2 ELM327 compatible adapter to work.
Recommended ELM327 adapters brands: OBDLinkMX (best), Viecar, V-Gate, Carista, LELink, Veepeak or any ELM327 compatible with v1.4.
If you are going to buy one of the cheap china OBD2 ELM327 clones from ebay / amazon, then make sure it is not v.2.1. These adapters have very limited functionality and most likely will not work with our application.

Some info about ELM327 interfaces:

Also, in case of any issues it is possible to save log and forward it on info@opel-scanner.com for troubleshooting. Log creating can be enabled from the application menu.

The ELM 327 adapter uses only pin 7, so in order to benefit all features of ScanMyOpel application, please connect together pins 7, 3 and 12 in the ELM327 adapter and you will be able to connect to other modules, like AT, ABS, ...

Please try our free Lite version to see if your car is being supported properly BEFORE purchasing the full version.

*** Feel free to email (info@scanmyopel.com) us directly for issues and support before commenting with low ratings. Thanks! ***

Support forum can be found here:
Updated on
Jan 15, 2023

Data safety

Safety starts with understanding how developers collect and share your data. Data privacy and security practices may vary based on your use, region, and age. The developer provided this information and may update it over time.
No data shared with third parties
Learn more about how developers declare sharing
No data collected
Learn more about how developers declare collection

Ratings and reviews

842 reviews
Mario Gjolena
November 6, 2021
I got as a first car an Opel Corsa C 2006 (Z10XEP). The app works and it is very helpful but I am leaving 2 stars just so you add same more support for this model. There is nothing in the actuators tests and I thing there is some weird thing with the port deactivation position voltage. I will change the stars to 5 as soon as more support is added! Great Work Really!
6 people found this review helpful
Did you find this helpful?
Car Diagnostic Solutions
November 6, 2021
This doesn't seem right. We want to take a closer look at this for you. Please send a note to info@scanmyopel.com so we can connect.
A Google user
December 28, 2019
Very good tidy app. I have one installed on the phone and the in car entertainment system. OBD2/ELM clone advice: I use a device by XTrons from Amazon. Do NOT use the Carista device as previously advised by the author, it can't handle the necessary protocols, will not connect and is overpriced. Seems to have gotten a bit unstable after last update... Not to happy.
24 people found this review helpful
Did you find this helpful?
Car Diagnostic Solutions
January 4, 2020
Hi, we apologize for any issue you might be having! Could you send details of what you are experiencing to our customer support at info@scanmyopel.com? We'll get you up and running.
A Google user
March 12, 2020
Bought this as I'm having issues with an air intake sensor on my meriva. All works fine with a cheap Bluetooth adapter. Get the odd connection error but just retry and it works great. Really good for checking out all the sensors. Can watch live data on my air intake sensor to see what's happening. Definitely useful and worth the purchase price. 😁
19 people found this review helpful
Did you find this helpful?
Car Diagnostic Solutions
March 15, 2020
Thank you very much for your 5-star review!!!

What's new

- Added actuator tests for EDC15M and PSG16
- Improved stability