A2N Kernel Control for Galaxy Ace 2


If you installed the powerful A2N Kernel to your Galaxy Ace 2 then this Kernel Control App is a "must-have-App" to enjoy your Phone and Kernel properly.

This App is only for the following Devices and only in combination with A2N Kernel.

### Supported Devices ###

--> GT-I8160
--> GT-I8160P
--> GT-I8160L

### App Features ###

# Power
--> Allows you to adjust AC / USB 2.0 Charging Current(max) (separately) from 100 - 1500 mA in 100 mA Steps (Fail-safe)
--> Charging Current - Check if the power source can handle the selected Current, if it's unstable the Kernel will reduce the Current till it is safe.
--> 80% Charge - Stops and holds charging at 80%, useful if charging over night to reduce the battery stress.
--> BLN EOC - When Battery is full turn on the Soft-Keys LEDs.
--> USB Power - Enables output Voltage to the USB Port, useful if u need to power up some usb gadgets (no real OTG Support)
--> Show power Menu - using an emulated power-button press, useful if the power-button is broken (You can boot the Phone with a cheap USB-JIG Adapter)

# Audio #
--> Low Level Gain Control - Headphones, Earpiece and Microphone
--> LPA - Low-Power-Audio, reduces Audio Voltage on Suspend for Powersaving (up to -100 mV)
--> Volume Control - Emulated buttons press (useful if the hardware buttons are broken)

# Screen #
--> Sweep2Wake - Wake up the phone with a Swipe
--> Suspend - Emulated (useful if the Power button is broken)

# CPU #
--> Adjust CPU Min/Max Frequency - Overclock Control (200 - 1300 MHz)**1
--> Undervolting (up to -200 mV)
--> Governor tuning for more performance or more power saving (very easy to use)

# GPU #
--> Adjust GPU Max Frequency - Overclock Control (450 - 800 MHz)**2
--> Undervolting (up to -200 mV)
--> Governor tuning for more performance or more power saving (very easy to use)

# Performance Profile #
--> Powersave
--> Balanced
--> Performance

# Misc #
--> KSM - Kernel same page merging, to use RAM more efficient (only 1% CPU load on Idle)
--> Check shared RAM - Shows the amount of saved RAM in MB
--> FSB/DDR Overclock (overclocks FSB/DDR Frequency from 200/800 MHz to 250/1000 MHz, improves overall performance)
--> Torch Brightness - allows you to adjust the Brightness of the rear LED (Camera Flash for Torch)
--> Use as Notifications LED - uses the Soft-Key LEDs
--> ON/OFF Delay - Ability to adjust how the LEDs should blink
--> Network File Systems - Enables Support for CIFS and NFS
--> Use calibration data - Accelerometer calibration
--> Disable Logger - Disables Android Logger, for powersaving

# Debug-Menu #
--> Disable Restore on Reboot - Disable restoring of settings on reboot, useful if you are not sure whether the settings are stable.
Otherwise all settings will survive a reboot.

**1 = Stock CPU max Freq is 800 MHz and the maximum adjustable Freq of 1300 MHz is very rare to work stable, since it depends on the quality of the CPU.
However the minimum stable overclocking Freq should be 1150 MHz, but if your Phone has good Quality chips then it will work stable at 1200 MHz or even 1250 MHz.
So the very high Frequencies are not meant to work 100% stable, but they are there so that you can see what is the maximum stable Freq possible for your Phone.

**2 = Same like CPU, the Stock GPU max Freq is 400 MHz. The max adjustable Freq of 800 MHz is unlikely to work stable, but 650 - 700 MHz should work stable for every Phone.

### END OF App Features ###

For more details, please check the Screenshots.

--> I am not responsible for any pain you may feel as result of using my App. You do it all at your own Risk!

World-gear-symbol designed by Freepik from www.flaticon.com - edited by ace2nutzer
Read more
26 total

What's New

Power-> Charger Control --> AC/USB: allowed up to 1500 mA
CPU: added ability to set min_freq up to 200 MHz (not only for suspend)
Screen -> Touch: added ability to use Sweep2Wake without extra wakelock
CPU/GPU: added ability to tune the Governor (very easy to use)
Read more

Additional Information

Eligible for Family Library
Eligible if bought after 7/2/2016. Learn More
August 17, 2019
Current Version
Requires Android
4.1 - 8.0
Content Rating
Offered By
Silvestro Sanfilippo Kronstädter Straße 17 50858 Köln
©2019 GoogleSite Terms of ServicePrivacyDevelopersArtistsAbout Google|Location: United StatesLanguage: English
By purchasing this item, you are transacting with Google Payments and agreeing to the Google Payments Terms of Service and Privacy Notice.