BaseCalc Electric Calculator
In-app purchases
Everyone
info
0+
Downloads
About this app
BaseCalc Electric Calculator is an NEC-aware electrician calculator for job-site field math, worksheets, materials, and saved calculation history. Run voltage drop, wire size, conduit fill, service load, breaker, grounding, EV charger, generator, and other electrical calculator checks on site, then save the result for the job.
18 CALCULATORS FOR DAILY FIELD WORK
- Ohm's Law: solve voltage, current, resistance, and power from any two known values.
- Voltage Drop: single-phase or three-phase, copper or aluminum, with a 3% target check.
- Wire Size: minimum conductor sizing based on NEC 310.16 ampacity with temperature and conductor-count adjustment.
- Conduit Fill and Conduit Size: fill percentage and first raceway size that passes.
- Box Fill: required box volume per NEC 314.16.
- Conduit Bend and Bend Layout: offset bend marks, rolling offsets, saddles, and layout guidance.
- Service Load: dwelling service/load sizing guide based on NEC 220 concepts.
- Breaker + Wire: continuous-load OCPD and conductor guidance.
- Grounding: EGC and GEC starting-point sizing.
- Motor Circuit: FLC, conductor ampacity, overload, and short-circuit/ground-fault guides.
- Pull Box: straight, angle, and U-pull box dimension guide.
- Derating: temperature correction and current-carrying conductor adjustment.
- EV Charger, Generator, Transformer, and Power calculators for common field checks.
EVERY RESULT IS EXPLAINED
- Clear pass/fail or sizing messages.
- The governing limit, final answer, and calculation breakdown.
- Saved local history so you keep a job-site record.
JOB RECORDS, MATERIALS, AND WORKSHEETS
- Save job contacts with site notes.
- Build job worksheets with scope, quantities, and site notes.
- Export worksheet PDFs for internal handoff or customer context.
- Plan common pull-list items before rough-in, trim, and closeout.
- Send the finished billing handoff to SpeakSheet for the final invoice.
DEVICE-LOCAL FOR THE FIELD
- Works offline by default.
- No BaseCalc account or cloud sync.
- Job contact, worksheet, setting, and calculation data stays on this device, protected by your device security.
- There is no BaseCalc cloud option.
- Dark and light themes with a high-contrast job-site interface.
BaseCalc Electric is a professional reference tool. Always verify against the current National Electrical Code and your local amendments. The authority having jurisdiction has the final say.
18 CALCULATORS FOR DAILY FIELD WORK
- Ohm's Law: solve voltage, current, resistance, and power from any two known values.
- Voltage Drop: single-phase or three-phase, copper or aluminum, with a 3% target check.
- Wire Size: minimum conductor sizing based on NEC 310.16 ampacity with temperature and conductor-count adjustment.
- Conduit Fill and Conduit Size: fill percentage and first raceway size that passes.
- Box Fill: required box volume per NEC 314.16.
- Conduit Bend and Bend Layout: offset bend marks, rolling offsets, saddles, and layout guidance.
- Service Load: dwelling service/load sizing guide based on NEC 220 concepts.
- Breaker + Wire: continuous-load OCPD and conductor guidance.
- Grounding: EGC and GEC starting-point sizing.
- Motor Circuit: FLC, conductor ampacity, overload, and short-circuit/ground-fault guides.
- Pull Box: straight, angle, and U-pull box dimension guide.
- Derating: temperature correction and current-carrying conductor adjustment.
- EV Charger, Generator, Transformer, and Power calculators for common field checks.
EVERY RESULT IS EXPLAINED
- Clear pass/fail or sizing messages.
- The governing limit, final answer, and calculation breakdown.
- Saved local history so you keep a job-site record.
JOB RECORDS, MATERIALS, AND WORKSHEETS
- Save job contacts with site notes.
- Build job worksheets with scope, quantities, and site notes.
- Export worksheet PDFs for internal handoff or customer context.
- Plan common pull-list items before rough-in, trim, and closeout.
- Send the finished billing handoff to SpeakSheet for the final invoice.
DEVICE-LOCAL FOR THE FIELD
- Works offline by default.
- No BaseCalc account or cloud sync.
- Job contact, worksheet, setting, and calculation data stays on this device, protected by your device security.
- There is no BaseCalc cloud option.
- Dark and light themes with a high-contrast job-site interface.
BaseCalc Electric is a professional reference tool. Always verify against the current National Electrical Code and your local amendments. The authority having jurisdiction has the final say.
Updated on
Safety starts with understanding how developers collect and share your data. Data privacy and security practices may vary based on your use, region, and age. The developer provided this information and may update it over time.
No data shared with third parties
Learn more about how developers declare sharing
This app may collect these data types
Financial info
Data is encrypted in transit
You can request that data be deleted
What’s new
BaseCalc Electric calculator launch release.
App support
About the developer
BASEMAPPED LLC
summerlyn@basemapped.com
3400 Cottage Way Ste G2
Sacramento, CA 95825-1474
United States
+1 818-481-0314
