Bendsmith turns rise, distance and angle into the marks you put on the pipe — calculated for the hand bender you actually use.
Pick your bender once. Every bend then uses its take-up, gain and radius, and shows clear marks measured from the end of the conduit.
12 BEND TYPES
• Offset
• Rolling offset (rise + roll, true offset)
• 3-point saddle
• 4-point saddle
• 90° stub-up
• Kick
• Back-to-back 90s
• Parallel offsets
• Matching centers
• Segmented 90 (large radius in shots)
• Box offset
• Concentric bends
CLEAR, NUMBERED DIAGRAMS
Each bend shows a clean diagram with numbered dimensions — between bends, angle, rise, shrink — and the values right below it. Tap the diagram to open a full-screen view and pinch to zoom in on the job.
MARKS ON THE STICK
• A, B and C marks measured from the end of the conduit
• Which way the hook faces and where the arrow goes
• Shrink and multiplier for every offset
• Quick check warns you when a bend won't fit a 10 ft stick or the numbers don't add up
PLAN THE WHOLE STICK
Add bends to a 10 ft stick, see every mark in order, total shrink and how much is left. Save jobs, and share the marks as text with your crew.
YOUR BENDER, DIALED IN
• Library of popular EMT, IMC, rigid and PVC hand benders with factory take-up, gain and radius
• Add your own bender and calibrate it to match your real bends
JOB SITE TOOLS
• Conduit fill — pick conduit type, size and THHN wire to check the NEC 40% fill limit
• Angle finder — lay the phone on the conduit to read the bend angle
• Fraction ↔ decimal ↔ mm converter
• Cut list — fit your runs onto 10 ft sticks and see the waste
REFERENCE
• Multipliers and shrink per angle
• Conduit dimensions (OD, ID, wall) for EMT, IMC, RMC and PVC
• Short guides to the methods, plus step-by-step "show me how" for each bend
BUILT FOR THE FIELD
• Inches to 1/16", feet + inches, or millimeters
• Large numbers mode, keep screen on, haptic feedback
• Works offline, no account, no sign-up
• Back up and restore your benders and jobs
• English, Tiếng Việt, Español, Français, Português (Brasil)
Always verify on scrap before bending production conduit. Values depend on your bender and conduit; follow the NEC and your local code. Bendsmith is not affiliated with any bender manufacturer.
Conduit bending calculator: offset, saddle and stub marks for your bender.