ISOBLOK (ISOBUS UT)
50+
Downloads
Everyone
info
About this app
The app is ISOBUS Universal Terminal software designed for smartphones and tablets both for Android/iOS. The software connects via USB to ISOBLOK HW that contains an out-door ISOBUS (IBBC) socket on the rear of the tractor and an in-cab connector. The cable harness connects to the battery of the tractor.
The product primarily intended for retrofitting used tractors to make them compatible with widely used ISOBUS implements on the market. The hardware requires a fixed installation on the tractor, but the display can be moved freely between tractors (in case of multi-tractor farms).
The system has two main components:
1. cross-platform software
2. ISOBLOK hardware and it's cable-harness
The cable-harness fulfill all the ISOBUS hardware requirements (ISO-11783-2:2019), therefore it has in-cab and diagnostic interface, connection the the ignition switch and the necessary fuses for the power line. The connection between the display and the hardware is USB connection that allow the user to use the display anywhere in the cab.
The hardware and the belonging software fulfills the ISOBUS TC, UT and TECU functionality. In case of connected 3rd party guidance system the auto-section control function also available.
The system is a cost-effective solution for every farm to install one system per tractor.
Functions in detail:
- The system is capable of performing the UT and AUX functions defined in the ISOBUS standard
- Displaying the IOP file of an ISOBUS implement connected to the tractor
- On the DataMask loaded from the IOP file, various machine controls and settings can be made manually
- The software handles multiple ISOBUS devices that can be connected to the network at the same time, so switching between WorkingSets is handled by the application
- Support for AUX functions
- USB interface between display and hardware, free serial (UART) interface for system integration with other devices (e.g. third-party navigation, automatic steering system, etc.)
- Use of built-in and external GPS speed signal for speed-dependent application rate control
- Compatible with MachineryGuide guidance software for section control functionality
The product primarily intended for retrofitting used tractors to make them compatible with widely used ISOBUS implements on the market. The hardware requires a fixed installation on the tractor, but the display can be moved freely between tractors (in case of multi-tractor farms).
The system has two main components:
1. cross-platform software
2. ISOBLOK hardware and it's cable-harness
The cable-harness fulfill all the ISOBUS hardware requirements (ISO-11783-2:2019), therefore it has in-cab and diagnostic interface, connection the the ignition switch and the necessary fuses for the power line. The connection between the display and the hardware is USB connection that allow the user to use the display anywhere in the cab.
The hardware and the belonging software fulfills the ISOBUS TC, UT and TECU functionality. In case of connected 3rd party guidance system the auto-section control function also available.
The system is a cost-effective solution for every farm to install one system per tractor.
Functions in detail:
- The system is capable of performing the UT and AUX functions defined in the ISOBUS standard
- Displaying the IOP file of an ISOBUS implement connected to the tractor
- On the DataMask loaded from the IOP file, various machine controls and settings can be made manually
- The software handles multiple ISOBUS devices that can be connected to the network at the same time, so switching between WorkingSets is handled by the application
- Support for AUX functions
- USB interface between display and hardware, free serial (UART) interface for system integration with other devices (e.g. third-party navigation, automatic steering system, etc.)
- Use of built-in and external GPS speed signal for speed-dependent application rate control
- Compatible with MachineryGuide guidance software for section control functionality
Updated on
Safety starts with understanding how developers collect and share your data. Data privacy and security practices may vary based on your use, region, and age. The developer provided this information and may update it over time.
No data shared with third parties
Learn more about how developers declare sharing
No data collected
Learn more about how developers declare collection
What’s new
Bugfixes for KUHN implements
App support
phone
Phone number
+36703447444
About the developer
BRTK, Inc.
info@brtkinc.com
677 N Washington Blvd # 57
Sarasota, FL 34236-4241
United States
+36 70 344 7444