Drip Speaker Cleaner Water Fix
In-app purchases
50+
Downloads
Everyone
info
About this app
Remove water from your phone speaker in seconds.
Dropped your phone in water? Speaker sounds muffled after rain, a splash, or a swim? Drip plays sound frequencies that vibrate trapped water right out of the speaker grille. No hardware needed.
HOW IT WORKS
Low-frequency tones create rapid vibrations inside the speaker chamber. Those vibrations break the surface tension of trapped water droplets and push them out through the grille. It's the same physics behind how water-resistant devices are tested in labs.
CLEANING MODES
• Water Ejection — Pulsed 165 Hz tones blast water and liquid out in 15 seconds. Fixes muffled, quiet, or distorted sound from moisture.
• Dust Removal — High-frequency bursts (1,000–3,000 Hz) shake loose dust and debris from your speaker grille.
• Deep Clean — Full frequency sweep from 100 Hz to 10,000 Hz for a thorough speaker cleaning session.
• Earbud Cleaning — Gentle low-frequency mode designed for wireless earbuds, TWS buds, and Bluetooth headphones.
• Earpiece Cleaning — Dedicated mode for your phone's earpiece with isolated audio routing.
WHY DRIP?
Most speaker cleaners just loop a single tone. Drip runs timed frequency sequences, syncs haptic vibration with sound, and routes audio separately for speaker, earpiece, or stereo depending on what you're cleaning.
AUDIO TOOLS
• Tone Generator — Generate any frequency from 20 Hz to 20,000 Hz. Test speakers, tune instruments, or run audio diagnostics. Control Hz, waveform, volume, and stereo pan.
• Decibel Meter — Real-time dB meter using your phone's microphone. Good for checking speaker output or ambient noise levels.
• Sound Relief — White noise, pink noise, and brown noise for focus, sleep, or relaxation. Binaural beats included.
WHEN TO USE DRIP SPEAKER CLEANER
✓ Phone dropped in water, toilet, sink, pool, or puddle
✓ Speaker sounds muffled, crackly, or quiet after getting wet
✓ Wireless earbuds sound dull or have reduced bass after moisture
✓ Dusty speaker grille causing distorted or muffled audio
✓ Checking speaker health after water or liquid damage
✓ Measuring noise levels with the dB meter
SAFETY BUILT IN
Every session starts with a safety check. Headphone detection warns you before any tones play. Sessions max out at 60 seconds to protect your hardware. You'll get a reminder to turn volume up so the cleaning actually works.
FREE & PREMIUM
Free: 3 cleaning sessions per day — Water Ejection, Dust Removal, Tone Generator, Decibel Meter, and Sound Relief.
Get Pro: Unlimited cleaning, Deep Clean, earbud cleaning mode, and extended dB meter sessions.
Works on all Android phones and tablets.
Terms of Service: https://www.dripspeakercleaner.com/terms
Privacy Policy: https://www.dripspeakercleaner.com/privacy
Dropped your phone in water? Speaker sounds muffled after rain, a splash, or a swim? Drip plays sound frequencies that vibrate trapped water right out of the speaker grille. No hardware needed.
HOW IT WORKS
Low-frequency tones create rapid vibrations inside the speaker chamber. Those vibrations break the surface tension of trapped water droplets and push them out through the grille. It's the same physics behind how water-resistant devices are tested in labs.
CLEANING MODES
• Water Ejection — Pulsed 165 Hz tones blast water and liquid out in 15 seconds. Fixes muffled, quiet, or distorted sound from moisture.
• Dust Removal — High-frequency bursts (1,000–3,000 Hz) shake loose dust and debris from your speaker grille.
• Deep Clean — Full frequency sweep from 100 Hz to 10,000 Hz for a thorough speaker cleaning session.
• Earbud Cleaning — Gentle low-frequency mode designed for wireless earbuds, TWS buds, and Bluetooth headphones.
• Earpiece Cleaning — Dedicated mode for your phone's earpiece with isolated audio routing.
WHY DRIP?
Most speaker cleaners just loop a single tone. Drip runs timed frequency sequences, syncs haptic vibration with sound, and routes audio separately for speaker, earpiece, or stereo depending on what you're cleaning.
AUDIO TOOLS
• Tone Generator — Generate any frequency from 20 Hz to 20,000 Hz. Test speakers, tune instruments, or run audio diagnostics. Control Hz, waveform, volume, and stereo pan.
• Decibel Meter — Real-time dB meter using your phone's microphone. Good for checking speaker output or ambient noise levels.
• Sound Relief — White noise, pink noise, and brown noise for focus, sleep, or relaxation. Binaural beats included.
WHEN TO USE DRIP SPEAKER CLEANER
✓ Phone dropped in water, toilet, sink, pool, or puddle
✓ Speaker sounds muffled, crackly, or quiet after getting wet
✓ Wireless earbuds sound dull or have reduced bass after moisture
✓ Dusty speaker grille causing distorted or muffled audio
✓ Checking speaker health after water or liquid damage
✓ Measuring noise levels with the dB meter
SAFETY BUILT IN
Every session starts with a safety check. Headphone detection warns you before any tones play. Sessions max out at 60 seconds to protect your hardware. You'll get a reminder to turn volume up so the cleaning actually works.
FREE & PREMIUM
Free: 3 cleaning sessions per day — Water Ejection, Dust Removal, Tone Generator, Decibel Meter, and Sound Relief.
Get Pro: Unlimited cleaning, Deep Clean, earbud cleaning mode, and extended dB meter sessions.
Works on all Android phones and tablets.
Terms of Service: https://www.dripspeakercleaner.com/terms
Privacy Policy: https://www.dripspeakercleaner.com/privacy
Updated on
Safety starts with understanding how developers collect and share your data. Data privacy and security practices may vary based on your use, region, and age. The developer provided this information and may update it over time.
This app may share these data types with third parties
Device or other IDs
No data collected
Learn more about how developers declare collection
Data is encrypted in transit
What’s new
Launch
App support
About the developer
CURLYCORN LLC
hi@curlycorn.com
530B Harkle Rd Ste 100
Santa Fe, NM 87505-4739
United States
+49 1517 2379893
