EMBER Smart Heating Control

621 reviews
Content rating
Everyone
100K+
Downloads
Content rating
Everyone
Learn more
Screenshot image
Screenshot image
Screenshot image
Screenshot image

About this app

One App, Four Systems!
EMBER Smart Heating Control has been updated to control a new range of EPH Controls products with the EMBER logo including the smart Radiator System RS and smart Underfloor System US.

Ask your installer for EPH EMBER today.

With improved and intuitive navigation you will have easier access to your homes heating system and improved control of multiple zones and multiple homes from the palm of your hand.

EMBER Smart Heating can control 4 types of heating systems:

EMBER PS – Programmer System.
Version 1: This system is comprised of our wireless enabled R-Series programmers, thermostats using the GW01 gateway
Version 2: This system is comprised of our wireless enabled R-Series version 2 programmers and thermostats using the GW04 gateway.
EMBER RS – Radiator System.
This system is comprised of our new RF16 controller, eTRV and eTRV-HW using the GW04 gateway.
EMBER TS – Thermostat System.
Version 1: This system is comprised of our WiFi ready CP4-OT and CP4-HW-OT thermostats using the GW03 gateway.
Version 2: This system is comprised of our version 2 WiFi ready CP4v2, CP4D and CP4-HW thermostats using the GW04 gateway
EMBER US –Underfloor System.
This system is comprised of our new Underfloor heating controller UFH10-RF and thermostats using the GW04 gateway.
New Features
Grouping
It is now possible to group zones to allow control of multiple areas at once, the user can set up to 10 groups and add their zones to these groups for easier control of the whole house.
Setback (PS and US only)
It is possible to set a heating zone to operate in a setback mode. This will allow the user to set a value from 1-10°C. When the system is timed off it will turn the temperature down by this value and activate if it falls below the lower level.
Quick Boost
It is now possible to set the Quick Boost temperature for heating zones with an expanded range.
Eco Monitor
The Eco monitor is now available on the TS and all version 2 products in the EMBER range. It can be activated in the Home Info section of the menu. It will show temperature logs for each zone and overall usage of the system in hours.

Advance Function (PS and US only)
Advance function can now be activated from the Zone Control screen.

Improved Setup process
For enhanced security and convenience, this version allows the installer to set up a customer home with their own credentials. When the home owner logs in, the installer will be removed from the home and the home owner will be assigned Super Admin status.

Upgraded User Management
The user management function has been improved with an extra security layer and more detailed user information.

Schedule Overview
A complete overview of your programming schedule is now available on the Schedule screen.
With EMBER you can control your hot water and heating anywhere, anytime
Updated on
Aug 24, 2026

Data safety

Safety starts with understanding how developers collect and share your data. Data privacy and security practices may vary based on your use, region, and age. The developer provided this information and may update it over time.
  • No data shared with third parties
    Learn more about how developers declare sharing
  • This app may collect these data types
    Location, Personal info, and Device or other IDs
  • Data is encrypted in transit
  • You can request that data be deleted

Ratings and reviews

604 reviews
Ener Ex
November 10, 2026
I've just noticed that the Eco/Usage graph data from "Last year" (black line) is missing. The app still fails to record activity in the log initiated from the thermostat. - so, in our case where we use "Boost" rather than programmed times, the activity log will never be accurate! While there seems to be a slight improvement, we (on different phones) still find that "Apply Boost" often does nothing but show the spin icon and eventually time out, requiring a "force quit" and relaunch.
1 person found this review helpful
Did you find this helpful?
EPH Controls
November 22, 2025
Hi Ener, Thank you for your update. The issues you describe with lagging and force quit are usually handset related. In regard to your suggestion RE app data, thanks its been noted, we currently only log EMBER data and not the hardware input, but this may be possible in a future update. - Terry EMBER https://www.ephcontrols.co.uk/contact-us/
Niamh Desmond
November 13, 2026
When it works its v handy but repeated problem on both android & ios version of apps (tried it on two phones in the household) with the Auto/timer function. When I scroll to select a time it changes all the times for on/off to that same time, every time I scroll it jumps to same time.
Did you find this helpful?
Fa.R
November 5, 2026
Appalling customer service, worst I've had, going on for weeks. Been trying to resolve ember hub not connecting to the app after getting a new virgin WiFi hub but keep getting sent instructions how to connect ember mug then apologies, then silence then stupid questions like does your phone connect to WiFi. Not once have I had a suggestion to try or anything resembling a solution.
Did you find this helpful?

What’s new

Fix some known issues
Content rating
Everyone
Learn more

App support

About the developer
E.P.H. CONTROLS LIMITED
technical@ephcontrols.com
Doughcloyne Industrial Estate 4 Doughcloyne Court, Wilton CORK T12 XT95 Ireland
+353 86 785 3557