EV Scanner lets you check your electric car's battery yourself using an ELM327 OBD2 adapter (Bluetooth, BLE 4.0 or WiFi). Plug the adapter into the OBD2 port, tap Connect, then tap Scan. In seconds you see battery health (SOH), state of charge (SOC), charge cycles, odometer, temperatures and error codes in a clear, easy-to-read dashboard.
KEY FEATURES
• State of Health (SOH): battery health as reported by the car's BMS
• State of Charge (SOC) and estimated remaining range
• Charge cycles: the cycle count kept by the battery itself (BMS)
• Odometer read automatically from the car, with average km per cycle
• Pack voltage, current and power (kW), while charging and while driving
• Highest, lowest and average cell voltage, plus cell balance (Δ mV) with an easy rating
• Battery pack temperature (min, average, max)
• Charging status: AC input voltage, DC charging voltage and current
• 12V battery voltage and DC-DC converter status
• Read diagnostic trouble codes (DTC) with plain-language explanations
• Clear DTCs (for experienced users)
HISTORY & BATTERY HEALTH TRENDS
• Every scan is saved automatically on your phone
• SOH trend chart to follow battery degradation over time
• Ideal for routine checks, before a long trip, or when buying a used EV
EASY TO USE
• Short guided introduction for new users
• On the first connection, the app lists your adapters (OBD adapters marked ★); after that it connects automatically
• Works with classic Bluetooth, BLE 4.0 and WiFi adapters
• Modern dark design, available in English and Indonesian
• Scan history stays on your phone and is not sent anywhere
SUPPORTED VEHICLES
• Wuling Air ev (Long Range): verified data profile covering SOH, SOC, cells, temperatures, current, odometer and charge cycles
• Other Wuling EVs (e.g. Binguo EV): can be tried with the Wuling EV profile; some data is not yet verified
• BYD Atto 1: battery data is locked by the manufacturer's gateway; currently only the 12V battery voltage is available
• Other vehicles: standard OBD2 mode with limited data
New vehicle profiles will be added over time.
WHAT YOU NEED
• An ELM327-based OBD2 adapter: Bluetooth, BLE 4.0 or WiFi (a good-quality adapter is recommended)
• A vehicle with an OBD2 port
• The car switched to READY while scanning, because battery data is only available in READY
IMPORTANT - PLEASE READ
This app reads data through an OBD2 adapter and is intended for informational purposes. Use at your own risk. DO NOT use while driving. Advanced features such as Clear DTC should only be used while the vehicle is stationary and by users who understand the risks.
This app is NOT affiliated with, endorsed by, or an official product of any vehicle manufacturer. All brand and model names are mentioned only to indicate compatibility.
Readings depend on what your vehicle and adapter support. Some vehicles may show limited data.
Check EV battery SOH, SOC, charge cycles & error codes via OBD2 ELM327