Fallfactor is a climbing equipment log that answers the question any rope will eventually ask: Is it time to replace it? You register each rope, quickdraw, and sling with the manufacturer, model, manufacturing date, first use, length, and label specifications, then record each climb. The app saves the entire history of each item and shows the wear and tear compared to the manufacturer's recommended lifespan.
After a rock or gym climb, recording takes only about twenty seconds. Select the date, type (indoor, sport, or traditional), location, and equipment used. For each fall, drag the slider to select the rope length and fall distance; a visual diagram of the safety point, final anchor, and climber position will appear showing the corresponding fall factor, from a minor fall in the gym to a serious fall near the safety point. Add the number of hours the equipment is exposed to sunlight and mark a line if you find a broken core.
Each record changes the actual metrics. For each item, you see five levels of wear: age from the date of manufacture, years of use compared to your climbing frequency chart, number of falls as a ratio to the number of UIAA tests listed on the label, exposure time, and any untreated core damage. The highest of these is the limiting factor and determines the clear status: good, needs monitoring, needs inspection, or should be replaced. Fallfactor views these metrics as estimates based on your own data, and always makes it clear that your direct inspection is the final decision.
Each type of equipment has its own checklist: line sheath, soft spots, hard spots, sealed ends and chemicals for lines; buckles, grooves, and stitching for quickdraws; seams, cuts, and UV fading for slings. Take a picture of the rope sheath with your camera or select an image from your library, then add a note for comparison later. Anything you mark will add the item to the replacement list. Turn on reminders and the app will notify you when a rope, quickdraw, or sling needs checking, at intervals you choose.
When a rope breaks near the end, you can cut off the damaged section. Fallfactor will shorten the rope length, preserving the original length and sealing the break, so a 70m rope can continue to be used as a 60m rope while retaining its entire history.
Features:
• Tool cabinet for ropes, quickdraws, and slings with true-to-life rope sheath colors
• Timeline of climbing sessions by month, including totals by season and your heaviest fall
• Fall factor calculator with visual insurance diagram and severity levels
• Estimates wear and tear by age, frequency of use, UIAA falls, sun exposure hours, and core damage
• Individual checklists for each tool type, captured with camera or selected from gallery
• Inspection reminders via notifications, every 14, 30, 60, or 90 days
• Rope cutter to shorten rope after core breakage while maintaining history
• References on knot types (figure eight, clove hitch, munter, prusik, alpine butterfly, and many more) and how to inspect ropes and tools
• Operates offline; Your data is only stored on your phone.
Leo regularly, keep honest records, and let Fallfactor tell you which limit you're closest to.
Record every fall, and know when the rope, quickdraw, and sling need replacing.