Walk up to the machine with a starting point, not a guess. Pick the process, the metal and the thickness, and Weld Setup gives you the numbers to dial in on scrap before the real joint.
• Four processes: MIG/MAG, flux-core, TIG and stick (MMA)
• Mild steel, stainless and aluminium, with combinations that don't work flagged instead of guessed
• Thickness from 0.7 mm sheet up to 12 mm plate, with gauge and fractional inch labels too
• Wire, filler or electrode size, with the best match for the job marked
• Stick rods: E7018, E6013, E6010 and E308L-16
• Flat, vertical and overhead positions
• Big readouts for amps, volts and wire feed speed, each with a target and a range
• Gas, flow rate, polarity, transfer mode, stickout, tungsten, passes and machine notes
• Shop notes for the job, plus "If the bead looks wrong" fixes for porosity, undercut, burn-through, spatter and more
• Copy the settings to share with a mate or an apprentice
• Metric or imperial: mm and L/min, or inches, gauge, IPM and CFH
• Remembers your last setup. No account needed and it works offline
A starting chart, not a welding procedure specification. Machines, gas, fit-up and technique all move the puddle, so run a test bead on scrap and adjust before you weld anything that matters. Your qualified procedure always comes first.
Website: https://www.forestforgeapps.com
Privacy policy: https://www.forestforgeapps.com/privacy
Questions or feedback: forestforge.dev@gmail.com
Made by Forest Forge, an independent developer in the UK.
Starting amps, volts, wire speed and gas for MIG, flux-core, TIG and stick.