ATT-NFC
1K+
Downloads
Everyone
info
About this app
ATT NFC
An Ascon Tecnologic APP designed to make the programming of the new ATT1 family signal transmitters easy even in the field.
Thanks to this APP and to the NFC technology it is possible to read the configuration of a transmitter, save, modify and send it to one or more transmitters without using plugs, connectors, cables or other stuff.
The APP automatically recognizes the device and in a few seconds it reads the configuration.
At this point you can edit, save on your phone, send via email or copy to another ATT1 the currently stored configuration.
Among the special features is its ability to give to ATT1 device a name (NAME TAG) to identify it within the installation, set the output value that indicates the burn-out state, define whether the information will be given in ° C or ° F, define the retransmitted range and compensate for errors due to the position of the probe by means of a user calibration procedure or by offset and gain.
The complete user manual of the APP can be downloaded from the website : http://www.ascontecnologic.com/images/PRODOTTI/SensoriTrasmettitori/Temperatura/PDF/ATT1/ISTR-FAT-NFCENG01.pdf
The ATT1 family of transmitters is able to convert into a linearized and standardized output (4-20 mA) the signal coming from:
Thermocouples: B, E, J, K, N, R, S, T.
RTD: Pt100, Pt 1000, Ni 100.
Potentiometers: 0 - 400 Ohm or 0 - 4k Ohm.
Millivolts: -10 - +70 mV
Uncommon among others is the possibility, provided as standard to all users, to create and store custom linearization for non-standard sensors (or not provided from the factory), whether thermocouples, potentiometers or mV.
For convenience and usability reasons, the compilation of the linearization tables and the transfer of custom linearizations is possible only by using the RF programmer AFC1 connected to a PC (Windows) equipped with "AT NFC Soft" software, downloadable from ftp://atftp.ascontecnologic.com/ATT1_PC_Configurator/
MINIMUM SYSTEM REQUIREMENTS
Smartphone equipped with NFC
Operating system: Android 4.4 KitKat or higher.
RELATIONSHIPS WITH CUSTOMERS:
http://www.ascontecnologic.com/en/support/sales-conditions
An Ascon Tecnologic APP designed to make the programming of the new ATT1 family signal transmitters easy even in the field.
Thanks to this APP and to the NFC technology it is possible to read the configuration of a transmitter, save, modify and send it to one or more transmitters without using plugs, connectors, cables or other stuff.
The APP automatically recognizes the device and in a few seconds it reads the configuration.
At this point you can edit, save on your phone, send via email or copy to another ATT1 the currently stored configuration.
Among the special features is its ability to give to ATT1 device a name (NAME TAG) to identify it within the installation, set the output value that indicates the burn-out state, define whether the information will be given in ° C or ° F, define the retransmitted range and compensate for errors due to the position of the probe by means of a user calibration procedure or by offset and gain.
The complete user manual of the APP can be downloaded from the website : http://www.ascontecnologic.com/images/PRODOTTI/SensoriTrasmettitori/Temperatura/PDF/ATT1/ISTR-FAT-NFCENG01.pdf
The ATT1 family of transmitters is able to convert into a linearized and standardized output (4-20 mA) the signal coming from:
Thermocouples: B, E, J, K, N, R, S, T.
RTD: Pt100, Pt 1000, Ni 100.
Potentiometers: 0 - 400 Ohm or 0 - 4k Ohm.
Millivolts: -10 - +70 mV
Uncommon among others is the possibility, provided as standard to all users, to create and store custom linearization for non-standard sensors (or not provided from the factory), whether thermocouples, potentiometers or mV.
For convenience and usability reasons, the compilation of the linearization tables and the transfer of custom linearizations is possible only by using the RF programmer AFC1 connected to a PC (Windows) equipped with "AT NFC Soft" software, downloadable from ftp://atftp.ascontecnologic.com/ATT1_PC_Configurator/
MINIMUM SYSTEM REQUIREMENTS
Smartphone equipped with NFC
Operating system: Android 4.4 KitKat or higher.
RELATIONSHIPS WITH CUSTOMERS:
http://www.ascontecnologic.com/en/support/sales-conditions
Updated on
Safety starts with understanding how developers collect and share your data. Data privacy and security practices may vary based on your use, region, and age. The developer provided this information and may update it over time.
No data shared with third parties
Learn more about how developers declare sharing
No data collected
Learn more about how developers declare collection
App support
phone
Phone number
+39038169871
About the developer
ASCON TECNOLOGIC SRL
arthur.caminha@coel.com.br
VIALE INDIPENDENZA 56
27029 VIGEVANO
Italy
+55 48 99604-3808