It's not always possible during driving to switch to speaker or even during a normal call the phone may fall and then you will need to switch to speaker mode
This is a tool that monitor during a call check if Speaker mode should be enabled and enable it for you with and buttons pressed.
featured not included
* the app does NOT change the dialer application installed and does NOT change the monitor off settings of the phone
* decide how a call should start - on speaker mode or by checking the sensors
* auto reactivate tool after reboot
* use orientation sensor to sharpen needs - useful if you want to talk and want to put the phone faced down for devices with speaker on the back
* home `widget to check on tool status
* this app was tested on OS version 2.1 ,2.2 ,2.3,4.x
* this app was NOT tested on OS version 3.x
* this is NOT an alternative dialer so it will not replace any features you dialer have
* Orientation sensor is used to detect the situation that the device is upside down (for example on the table)
the default values are the value I think are the best but tweaking is recommended for better personalization.
* In case of issues or suggestions, please e-mail me with detail and do not leave unhelpful comments this way i can improve the for all of you
Tags: speaker auto speakerphone speaker mode carmode autospeaker
"I saw/heard a major difference . It realy helps."
"Omg. Cant believe it worked"
"Even if it doesnt work, its good for annoying people. Seemed like it worked though"
While the old fashioned method is still the best, Speaker Clean utilizes patent pending technology and ultra sound frequencies to attempt to dislodge dirt and particles that may be clogged in your speakers. Simply lay the device on a flat surface then tap the whirlwind button to initiate cleaning. The complete cycle takes less than thirty seconds but may provide a world of difference for speaker clarity.
Free, no more push ads, just a link to more free apps after cleaning!
★ Auto Speakerphone
★ Positional Speakerphone X 2
★ Proximity Speakerphone
★ 5 Widgets
Speakerphone Volume Control - A simple tool that allows you to control the speakerphone volume without any effort. When the speakerphone is turned on the volume will adjust to the preset volume automatically!
Auto Speakerphone - Incoming and outgoing calls can be automatically routed through the speakerphone. Perfect for *near* hands free driving.
Positional Speakerphone - Puts phone calls in speakerphone mode when the phone is placed in a preset position of choice. Two different positions can be set. *Speakerphone turns on but is not reflected on the speakerphone button.
*Accelerometer sensor required to function properly.
Proximity Speakerphone - Use the proximity sensors to work with the ability to enable and disable the speakerphone based on how close the phone is to your ear. *Proximity sensor required to function properly.
Widgets - Five useful widgets to help stay informed of which settings are active.
Option menu for volume adjustment, notifications and setting positions for Positional Speakerphone. Names can be given to each speakerphone position to display within the app and/or when the feature is turned on by a widget.
Android only provides one 'In-call volume' this app allows you to have two distinct volume controls, the regular phone volume and the speakerphone volume.
Find a bug?
Want to translate?
Send me an email.
For knowing when phone call has started and ended. Used by Speakerphone Volume Control, Auto Speakerphone, Positional Speakerphone
MODIFY_AUDIO_SETTINGS - Adjusts the volume, used by Speakerphone Volume Control
RECEIVE_BOOT_COMPLETED - Know when phone has just been reset. Used to fix issues with notifications and in app features swapping after reboots.
VIBRATE - Provides vibrations when buttons are pressed.
BLUETOOTH - Gives options for when a bluetooth headset is connected
Tags: speakerphone speaker phone volume volumes control controls audio manager audiomanager calls call log contact contacts favorites auto hand hands free handsfree car dock automatic widget widgets vibrate silent loud quiet system position positional orientation orientate flip car dock cardock desk sound names toast homedock home dock proximity sensor ear speaker phone 'speaker phone' "speaker phone" longest day apps
Auto Distance measure the distance to the target object automatically by aim the cameras at the base of the object. It works in camera live view.
Auto Measure uses the height of the camera lens and its tilt angle to calculate the distance to the object. You can continue measure the height of object by lock the distance and aim the cameras at the top of target object, as shows in the preview image. The only parameter required in this mode is the lens height, which is the height of your camera height to the base plane.
This application is very useful no matter is for indoor or outdoor activities. For example, you can estimate the distance to a building and height of a tree, distance to a building, height of a man, distance from home plate to the pitchers mound , distance to a boat, etc.
For more details information about how to use the app, please refer User Guide in this app.
★ Quick estimation of distance to object
★ Quick estimation of height of object
★ Camera auto focus, flash-light
★ Distance Lock/Unlock (Start height measure)
★ Height Lock/Unlock
★ Lens Height scroll bar and manual input
★ Customizable text size, line width, point size
★ Keep Screen Awake
★ Menu shortcut key on main screen
★ Show instruction on main screen
★ Support 7 Measurement Units: Millimeter(mm), Centimeter(cm), Meter(m), Kilometer(km), Inch(in), Yard(yd) and Feet(ft).
The accuracy of this app is highly relies on the device sensor. From some experiment we have done so far, the average accuracy of Auto Distance is falls between (+)(-)7.0%. You can use Manual Distance (Free Android App) for more accurate distance and height measurement if accuracy is important and critical.
We release Auto Distance in free and we really hope that this instrument tool can help you in quick distance estimation. We hopes you enjoy this tool. If you feel that this app is nice and useful, please take a little time to share this app with your friends or write a review on market. Your encouragement will be our motivation to continue improve and develope more free quality apps. If you have any comments, suggestions or questions, please feel free to contact us at email@example.com. Thank you!!
Autorizzato dalla Polizia di Stato.
***Recensito dalla rivista Al Volante***
-Non funziona con i ciclomotori, i dati di questi veicoli non sono pubblici come quelli delle auto quindi è una limitazione che non dipende dall'applicazione
-Se denunciate il furto di un veicolo ci vorranno settimane prima che il database della polizia sia aggiornato quindi non stupitevi se dopo pochi giorni il veicolo risulta ancora non rubato, tali tempi d'attesa non dipendono dall'applicazione
This application is included with my other toggles in my Premium Widget pack available for purchase in one convenient download!
**If you are having problems seeing the widget, please try recreating the widget or reinstalling. Necessary code updates may require this action, sorry!
This is designed to match my other widgets. This refreshes on a regular interval and when the screen is turned on (unlike other widgets) to stay up to date.
Please check out my other applications!
This is a widget. Long press on the home screen -> Add Widget -> Auto Rotate Widget.
Changelog on website
Forget about "kill all" buttons and all the hassle. AMM lets you customize the out-of-memory manager settings on your phone so you don't have to do it yourself with task killers. This works on both rooted and unrooted phones. So just start it up and forget about it.
If you have any questions or find a bug/problem please email the developer. We will try to reply ASAP.
Donating or buying the Premium version will remove ads.
task killer minfree lowmemkiller AMM
This tool is perfect to save the battery if you are staying often between places without WiFi. Personally, I have reduced the battery consumption of the WLAN by over 30% to 10%. The tool reduces the battery consumption and save the battery. It's a real energy saver.
It's activate after a defined interval the wireless network and retrieve the current position.
If you are in a defined radius to the specified location the WIFI be enabled.
Otherwise, the wireless LAN is disabled to save power.
It can travel up to 10 locations and the service can be started immediately after booting the system.
The Internet is used for advertising and Google Maps!
If you have any problems, errors, suggestions or requests then please e-mail to firstname.lastname@example.org
Celebrate more 100000+ downloads.
I add new features again.
Feel the pain in the neck when pressing the power button?
Each time you open the screen, you must be tired with pressing the power button?
You can try this software that allows the screen to
Turn screen on by g-sensor
Turn screen on by proximity sensor
Turn screen on by touching the proximity sensor twice on the devices
Pause function by notification/shortcut/widget
Battery save for this app
Logging for working status
Auto Pause at sleeping time.
Auto Stop/Start at discharging/charging..(It can not work with "Auto Pause at sleeping time".)
Enable/disable record log.
If you use protective sleeve or protective cover,
you can wake up screen automatically whenever you open the protective cover or take out from the protective sleeve.
This application uses sensors to wake up the device.
For g-sensor(Reliability 90%+): When the screen is off, pick up the device horizontally, then the screen would auto wake up.
For proximity sensor(Reliability 95%+): When the screen is off, approach the sensor, then the screen would auto wake up.
G-sensor may need to connect the USB or power or to open Screen Off Wakelock to work properly. Otherwise, on some devices, press the volume keys beforehand to make the device leave deep sleep, and then it will turn auto screen on by picking up the device.
Proximity sensor even in deep sleep is also easy to wake up the device, so it is recommended to use.
Using the history to observe the failure of Auto Screen’s behavior.
Widget can start/pause/enable app. And if the app is killed by out of memory, it would let the app be restarted faster than normal situation.
1.there is no guarantee that the application can be used in every device.
2.Some of Samsung devices may not use g-sensor feature because it doesn't let g-sensor on in the screen-off.
3.Android 4.2 may not work properly.
Thanks for Gareth Lewis correcting English translation.
Thanks for Kayoko Sawada helping Japanese translation and correcting English translation.
Thanks for Arsham Mergasemi correcting English translation.
Thanks for Андрей Кравцов helping Russian language
Thanks for J.J.Ponce helping Spanish language
Thanks for Ozan Çakar (XanthiN) helping Turkish language
Thanks for Dario Della Giovanna helping Italian language
* Speaking SMS messages with the senders name (It'll say something like "Jasmin texted you saying, I'd love to meet up on the green at two pm"), however stripping out them smiley faces and links so you don't get confusing things spoken
* Announcing a caller. Wanting to ignore everyone except a special someone? Well, it'll announce who's calling and then keep telling you
* Skip silent. Want Speaker to shut up while your on silent? Speaker can do this, or whatever you prefer
* Headphones-only mode. This means that if you plug your headphones in, Speaker will notify you otherwise shuts up
* Audio ducking. This will turn down your volume by a couple of notches so you can actually hear what the speaker is telling you. (If you're running Froyo, this feature is done by your system).
* Speak Desktop Notifications. If an app supports "desktop notifications" via this app: https://market.android.com/details?id=org.damazio.notifier then they will automatically be read out by Speaker if you wish!
So yeah, please enjoy, rate, review and look at my other apps.
If you get any issues, please email me!
If you are a developer you can add support for your app using the details here:
Like @kennydude apps on Facebook:
"To put it simply, Lux kicks the pants off of Android’s stock brightness manager, and it’s worth every cent." - Lifehacker
"Lux is a third-party app that allows you to easily calibrate your phone’s brightness sensor, saving you battery power and reducing eye strain if your phone is normally too bright in dark rooms." - HowToGeek
Lux isn't your ordinary brightness app. It intelligently adjusts the brightness of your display based on the environment you're in. If you step into a dimly lit room, Lux will automatically lower the brightness of your display to make it not only comfortable to read, but to also preserve battery power.
Lux is also able to adjust the screen temperature of your display automatically to make it appropriate for night usage. At sunset, you can have Lux automatically warm your display and switch to your Night profile. If you're an astronomer, you can enable astronomer mode to cut out harsh white light. If you have a root enabled phone, you may even be able to apply these enhancements at a low level with Lux's plug-in system.
Perhaps the best thing about Lux is that you can teach it how to behave. If the backlight is too bright or dim for your liking, simply open the provided Dashboard, adjust the brightness slider to the level you desire, then hold the link button. Lux will use this new 'link' as a reference in future.
Give it a go! I want you to test Lux for more than the 15 minute refund period offered by Google. I understand that some devices may not have the best quality light sensor, and that you may need more time to play around with settings. If you find that Lux doesn't suit you after the 15 minutes is up, you can request a refund within a week of purchase via e-mail - no questions asked.
■ Stable, custom auto brightness with root plug-in support.
■ Use your ambient light sensor or camera(s) to read in ambient light.
■ Subzero brightness for night viewing.
■ Select between Auto, Day, Night, Car and Cinema light profiles
■ Automatic night mode. Change the colour temperature of your display for comfortable night time viewing.
■ Astronomer mode. Adds a red filter to your display to preserve the eyesight of stargazers.
■ Power-user settings such as choice of interpolation, filters, and linked sample editing.
■ Add app specific exceptions via sleep mode.
■ Customisable fade for backlight adjustments.
■ Tasker and Locale support
■ Battery efficient.
■ Backup to SD.
■ No ads or other nuisances.
Note: Please disable other brightness apps before using Lux. The author is not liable for any issues caused when using this app.
Want Lux in your language? Join the translation project here:
TAKE PICTURES AND VIDEOS: Used to read in luma values if camera input is selected.
DRAW OVER OTHER APPS: Required for night/astro mode.
READ PHONE STATE: Required to prevent Lux from interfering with phone controls in Android 4.1.
MODIFY SYSTEM SETTINGS: Brightness is a system setting, as is toggling the default auto brightness.
RETRIEVE RUNNING APPS: Required to make the 'sleep list' functionality work, so Lux can disable itself when certain apps are in the foreground.
COARSE LOCATION: Required to automatically calculate sunrise/sunset times.
Need assistance? Have questions? Contact me via the 'Send Feedback' button in Lux settings, or via email at email@example.com.
This app is also suited for Tablets, graphs are shown in fullscreen.
Just enter your Thiele and Small parameters for your driver and you can choose different types of speakers: Sealed, Vented, Sealed Compound, Vented Compound, Push-Pull, 4th Bandpass and 6th Bandpass. It can calculate optimums for a sealed enclosure, vented, sealed comp., ventend comp. and 4h band pass. If you choose a vented or band pass enclosure, you also can calculate the vent length and minimum port diameter.
Speaker Designer can handle a number of metric types: Inches, cu. Inch, cu. ft, ltrs, cm, mm, etc.
Speaker Designer doesn't give you any dimensions for an enclosure. It gives you the volume for an enclosure in a given configuration. You will have to determine the dimensions your self. Don't forget, the volume is the net volume.
Volumen Control Plus is an application mainly for volume control on Android devices, which makes great improvements for easier settings. It is a complement to the android operating system. With it, you can control 6 volume types easily in one same interface. It also has three automatic presents for users to select.
All Volumen Control Plus do is to help users control easily. It provides a great notifications feature, which lets you select which indicators you want to see in the notification bar. All these indicators with their consumption levels can be visualized with this smart new feature.
In addition, Volume Control plus will help you customize and monitor the status of audio, brightness, battery, SD card and internal memory of the device. You must like it once you have a try. Don’t forget to share the great with your friends!
About permissions :
* INTERNET & ACCESS_NETWORK_STATE :
You do not have to spend money for this application, thanks to the " Share ", "Like" and " +1 " us help our community continue to grow and 1500000 are more followers join us.
Allows application to modify the volume and screen brightness of the device.
Lets start the volume Control plus when starting Android.
Support is available in the following countries :
United States Of America .
Tags: Volume control, audio, amplifier, brightness, notifications, social networks, increased sounds, battery, SD card, internal memory.
With the widget you can assign one or more screens on your home launcher to be dedicated for usage inside the car.
Unlike Car Home applications, you still will have access to all other screens of your home launcher.
HOW TO USE/OPEN/ADD
On any home screen press "menu", then "add", select "widgets" and choose "Car Widget" from the list of available widgets.
You might need to restart the device in order to widget to appear in the list.
* 4x4 widget
* You can assign 6 shortcuts per widget
* 5 Skins: Holo, Glossy, Car Home, Metro (Windows Phone 7), BlackBearBlac
* Customization options: background color, opacity, font size and color, icons tint
* Replacement for "Car Dock" / "Car Home" applications.
* Apply custom icon and edit title of shortcut
* Apply ADW Icon pack
Available shortcuts (can be expanded by installed applications):
* Direct dial/ message
* Directions & Navigation (Using Google Maps)
* Gmail label
* Music playlist
* Built-In Shortcuts - (InCar switch, Play/Pause, Next, Previous - Experimental)
Free version includes Trial of the features available in the Car Widget Pro.
Car Widget Pro features:
Detects when you inside the car and adjusts settings of your phone.
Detection (possible to combine all of the options):
* When power cable connected
* When headphones connected
* When Bluetooth device connected
* Activity recognition
* Turn on Bluetooth
* Disable screen timeout
* Adjust screen brightness
* Adjust volume level of media
* Switch off Wi-Fi
* Route call to speaker
* Auto answer (Experimental)
* Autorun App
* Shortcuts in notification bar (Android 4.0)
- It's not possible to unlock the screen from widget
- It's not possible to switch to the specific screen from widget
- Not possible to switch GPS
CALL_PHONE (Directly call phone numbers)- used for direct call shortcut
WAKE_LOCK (Prevent phone from sleeping) - used to disable screen timeout
WRITE_SETTINGS (Modify system settings)- used to adjust brightness settings
ACCESS_WIFI_STATE and CHANGE_WIFI_STATE - connect and disconnect from Wi-Fi
BLUETOOTH and BLUETOOTH_ADMIN - required in order to switch Bluetooth state
(Modify or delete the contents of your USB storage) - Backup/Restore functionality
* On some devices you have option "Stay awake" (Under Settings -> Applications -> Development), you can enable it if your want to prevent phone from sleeping.
* Landscape mode: Not all launchers allow to use phone in landscape mode, just replace yours with alternative one that supports it (like LauncherPro or ADW).
You can find Car Widget Pro also in androidpit.com market.
(This marketplace has an option for PayPal)
Please exercise caution when using this application and do not manipulate your device while driving. Always pay attention to the road.
*Other firmwares _may_ also work*
Auto App2SD lets you move all installed apps from the phone to the sd card (and also the other way round) without the need of moving each app manually.
Just select all apps you would like to move, click the "move" button and the app will do the rest for you.
We have found a new way to generate some money from this free app. using this new search tool, we can keep creating apps and give them to you completely free forever! This search is from our search partner and give you access to great web search via a search icon, bookmark link and homepage. You may remove them at your choice. Thanks.
More from developer
Development team put a large emphasis of simplicity and ease of use for the user.
Whenever you arrive at work, simply click "In" to log your shift start time; when you leave work, click "Out" to log your shift end time.
In order for you to evaluate the compatibility of the application to your needs, the basic version is free with limited features (with ads).
For the first 30 days most of the features are available.
You can upgrade to the Pro version (without ads) from within the application.
Features of the free version:
* Widget for In/Out logging without opening the application
* Clicking on the widget title will open the application
* Select between monthly or weekly summary type
* Set the first working day of the week (in weekly summary type)
* Current month\week shift list
* Configure automatic break time
* Allow to overwrite break time in each shift
* Indication on overlapping time (Red indicator)
* Indication on open shift (Yellow indicator)
* Indication on break time (Green indicator)
* Custom Shift color
Additional features in the Evaluation\Pro version:
* Backup and Restore of the data (Pro only)
* Automatically save backups in Google Drive (optional)
* Working month can start on a custom date (not on the first on the month)
- On the shift list view there will be an indication of the actual month
* Gross salary calculation
* Setting hourly rate by date (e.g. when you get a raise)
* Configure automatic expenses
* Allow to overwrite expenses in each shift
* Extra hours calculation
* Configure multiple shift types
* Support multiple "In"/"Out" in a single shift (split shift - Up to 5 parts in a shift)
* Indication on split shift (Orange indicator)
* Monthly\Weekly summary of all shifts
* View any month\week
* Send email report of your working time (from "Shift List" view) in CSV (Comma Separated Value) format
Any comments\requests can be sent to firstname.lastname@example.org. Just put in the subject "Shift Logger".