MAVVision

Devararendy

In-app purchases

About this app

MAVVision is a powerful, all-in-one utility designed for RC enthusiasts and developers. It transforms your Android device into a high-performance MAVLink telemetry bridge and a low-latency FPV camera streamer.
Whether you are building a long-range RC car, an autonomous boat, multi-rotor or a custom plane, MAVVision provides the critical link between your vehicle and your Ground Control Station (GCS).

Key Features:
• MAVLink Bridge: Seamlessly route MAVLink telemetry data between USB-Serial (USB-OTG) and Network protocols (TCP or UDP).
• FPV Video Streaming: Stream your device's camera feed to a remote GCS or video player using MPEG-TS or RTSP protocols.
• USB-to-Network: Connect your flight controller (ArduPilot, PX4, etc.) via USB and access it over your local network or via the internet.
• Video Recording on the Phone, with configurable resolution and FPS.
• Advanced Camera Controls: Support for front/rear camera switching, flash control, and hardware-level video stabilization (OIS/EIS) where supported.
• Integrated REST API: Remotely control camera settings and view status via a built-in web server.
• Real-time Diagnostics: Monitor USB and Network data throughput (Rx/Tx) and view connection logs instantly.
Use Cases:
• RC Cars, Plane, MultiRotor & Boats: Add a high-definition FPV feed and telemetry link using an Android phone as the onboard "brain."
• MAVLink Bridge: Use it as a wireless gateway for flight controllers that lack built-in Wi-Fi or Bluetooth.
• DIY Surveillance: Create a remote-controlled mobile camera platform.
IMPORTANT: DISCLAIMER OF LIABILITY MAVVision is a tool intended for use with Remote Controlled (RC) vehicles.
1. Pilot Responsibility: The user (the "Pilot") is solely responsible for the safe operation of any vehicle connected to this App.
2. Assumption of Risk: Using this App for FPV (First Person View) navigation and MAVLink bridging involves inherent risks. Hardware failures, software bugs, or signal interference can occur.
3. Limitation of Liability: The developer shall not be held responsible for any damage to property, personal injury, legal infractions, or any other incidents resulting from the use of this application. You must comply with all local aviation and radio frequency regulations.

Privacy Note: MAVVision respects your privacy. It does not collect or share personal data. All telemetry and video streams are point-to-point and happen locally or to the destinations you define.

What’s new

- MAVLink USB to UDP / TCP bridge, allow you to connect directly to flight controller via USB otg.
- Stream your Phone camera as a FPV camera via RTSP or MPEG TS
- Record directly to phone
- Two Way Audio Communication, talk to Phone via Web browser on GCS.
- Support OIS/EIS stabilization.
- H.265 support
- OSD overlays that shows phone battery, CPU, RAM status, Cell Signal, Video Stream Bitrate.
- Local Web server & REST API for controling camera, zoom, Turn On/Off Flash, Switch Camera.