By reading the NFC tag that is attached to Aterm wireless router in the app, Wi-Fi connection settings of smartphone-tablet and Aterm series base unit you can easily.
[Corresponding version] Android 4.1 or more (corresponding to the Google Play, available in a smartphone-tablet terminals with NFC function) Detailed correspondence version, please check the AtermStation (http://121ware.com/product/atermstation/special/rakuraku_kazashite/index.html).
[Connection confirmation models] Connection confirmation smartphone tablet terminal, Aterm series compatible models, please check the AtermStation (http://121ware.com/product/atermstation/special/rakuraku_kazashite/page3.html).
【Notes】 - If you have difficulty reading the NFC tag with your use of the terminal, please try the following. - NFC leader part of the smartphone-tablet terminal, Please check the instruction manual of the terminal, please contact the device manufacturer. - It may take some time to read. Please wait a few seconds. - And the NFC leader part of the smartphone-tablet terminal, as NFC tags are parallel, please held up close slowly. If you can not read is, by shifting to the left and right before and after the terminal, please or close to the NFC tag. - And have put the smartphone tablet terminal to the case or cover, it may not be read. When the -Wi-Fi setting sheet read and placed on top of the metal, it may not be read. If · NFC tag is not read correctly, there is that "the selection of operation" dialog is displayed. Please run the app again in that case. SSID of · Aterm (base unit), encryption keys can be set in the initial value state. Can not be set and have been changed from the initial value. - Please make sure that prior to Aterm of firmware to be connected is up to date. Please been upgraded if it is not up to date. - The handset, if you have set the relay machine can not be set. - Or read again NFC tags in the set, and or perform the operation of the other apps, you may set is interrupted, set from the beginning is started. We recommend that you do not perform the other operations until the completion Once you start setting. Bridge mode, wireless LAN access point mode, the router in a multi-stage connection, the Internet connection settings can not be performed correctly. (Wi-Fi connection settings you can.) • The Internet connection settings at the time, if it detects a conflict of IP address, it may fail to set. If this is the case, please do the settings in the WEB setting screen of Aterm.
new function · Ver.1.0.2 You changed the error message.