Omega MoonSwatch Saturn (fan)

Watch Faces - OP DEV

About this app

A tribute to the Mission to Saturn edition of the space chronograph, rebuilt as a standalone Wear OS watch face: a warm sand dial, two deep brown registers, Saturn and its rings printed across the register at 6, a brown tachymeter bezel, and white hands with an olive green seconds hand sweeping over it all.

THE RINGED ONE
Saturn is the ringed giant, and its edition wears the planet on the dial: the register at 6 is a small ochre Saturn, and its dark rings run right across it and out onto the dial. Around it, a soft sand dial, two chocolate brown registers with white numerals, pale applied markers, and a brown bezel with its white TACHYMETRE scale.

THREE REGISTERS
This is a chronograph-STYLE tribute, not a working stopwatch. There is nothing to start and nothing to stop:
• At 6, over Saturn: the running seconds, with an olive hand sweeping in step with the central seconds hand rather than ticking a second behind it
• At 10, on the 60 scale: the minutes. At 2, on the 12 scale: the hours. Both turning with the time like the main hands

CLASSIC OR DIAL
The face comes in two views:
• Classic: the whole watch, with the outer TACHYMETRE bezel around the dial
• Dial: a bezel-free view, zoomed so the printed dial runs right to the edge of the screen

ALWAYS-ON DISPLAY THAT STILL LOOKS LIKE THE WATCH
Most watch faces go nearly black in ambient mode and leave you two floating hands. This one keeps the watch on screen: the sand dial, the tachymeter bezel, the markers, the printed minute track, the registers and Saturn itself stay, deeply dimmed, with the white hour and minute hands lit on top. What goes out is only what runs, because that is what costs battery: the sweeping seconds and the three register hands. You can read the time at a glance without turning your wrist, and it still looks like the watch you chose. Measured at 12 per cent of full brightness against the 15 per cent Wear OS allows.

MORE
• Central hours and minutes with softly cast shadows, and no complications to fill in
• Standalone: no phone or companion app required
• Built with Watch Face Format for smooth performance and long battery life

NOTHING TO GRANT
You are not asked for any permission. The face carries no code of its own.

HOW TO CUSTOMIZE
Long-press your current watch face and tap Edit, or open it from the picker, then pick Classic or Dial.

COMPATIBILITY
Wear OS 5 and later, round displays. No blend modes are used, so it is not limited to 5.1 and runs on more Wear OS 5 devices.
Note for dual-chip watches (OnePlus Watch 3 and similar): their Power Saver mode only runs the manufacturer's own built-in faces, so any third-party face works in Smart mode only, and the watch warns you when you apply it.

Disclaimer: This is an unofficial, fan-made watch face created by an independent developer. It is not affiliated with, endorsed by, or sponsored by OMEGA or Swatch. All trademarks and brand names belong to their respective owners and are used only to describe the design that inspired this tribute.