BENDIQ: Bending Calculator

By.ozer

In-app purchases

About this app

WRONG FLAT PATTERN = SCRAP PART.
BENDIQ gives you the correct flat pattern and cut size for the press brake in seconds. No more notebooks, charts or guesswork.

✔ 30 days free — every feature unlocked
✔ No signup, no account: install and calculate
✔ No subscription — one-time payment
✔ Available in 50 languages

DON'T WASTE TIME
Pick material, thickness, V die and angle; the flat pattern (cut length), bend deduction and flange dimensions appear instantly. Flipping through charts, reaching for the calculator, bending test pieces… it all becomes a single tap.

CATCH THE MISTAKE BEFORE IT REACHES PRODUCTION
BENDIQ validates your inputs: a physically impossible bend warns you before the part goes to cutting. Scrap parts, wasted sheet and rework stay off the shop floor.

IT LEARNS YOUR MACHINE — FIRST-BEND CALIBRATION
No two machines and tools bend the same. Enter the value you actually measured once; BENDIQ learns your machine's real bend deduction for that material–thickness–die combination and applies it to every calculation afterwards. Not a generic table — your own shop's data. Your measurements stay on your device.

KEY FEATURES
• Flat pattern and cut size: by material, thickness, V die and angle
• Ready-made profile templates: L, C, U, Z, Hat, Lipped C
• Free drawing: build any cross-section yourself
• Dimensioned 2D technical drawing — on screen and in PDF
• 3D preview with the real bend radius
• AI measurement scan
• A4 technical report / quotation PDF — share with one tap
• First-bend calibration: bend deduction that learns your machine
• Part weight calculation
• Feasibility check: warning for impossible bends
• 50 languages: everyone on the team works in their own

WHO IS IT FOR?
• Press brake operators
• Sheet metal and body shops
• Machine builders and welding shops
• Draftsmen and process engineers
• Vocational school and college students
• Shop owners preparing quotations

WHY BENDIQ?
✔ Result in seconds — no menu maze in the middle of a shift
✔ Calibration that learns from your machine, not a generic table
✔ PDF output good enough to send to the customer
✔ One-time payment — no subscription pressure
✔ Everything free for 30 days — try first, decide later
✔ No signup: don't like it? Delete it and nothing is left behind

COPYRIGHT
© 2026 BENDIQ. All rights reserved. The BENDIQ name, logo, interface design and content may not be copied, reproduced or distributed without permission.

LEGAL NOTICE
Calculation results are engineering approximations and are for guidance. Verify critical dimensions with a test bend on your own machine before production. BENDIQ is not liable for production losses.

What’s new

• The PDF button now shows "Preparing…" while the file is being created, and the quote screen stays open until it is done. Fixed an issue where the same PDF could be created twice.
• Material, thickness, machine, die and language lists now use a single, consistent picker.
• Minor bug fixes and performance improvements.