Clinometer + bubble level

Contains adsIn-app purchases
4.3
52.5K reviews
5M+
Downloads
Content rating
Everyone
Screenshot image
Screenshot image
Screenshot image
Screenshot image
Screenshot image
Screenshot image
Screenshot image
Screenshot image
Screenshot image
Screenshot image
Screenshot image
Screenshot image
Screenshot image
Screenshot image
Screenshot image
Screenshot image
Screenshot image
Screenshot image
Screenshot image
Screenshot image
Screenshot image
Screenshot image

About this app

This professional tool called Clinometer is the most precise (all you can get with some calculations) slope measurement tool for the device using all sides of the device plus the camera. It can be used for simple applications like aligning a frame as well as for more sophisticated fields of applications where an arbitrary slope needs to be measured exactly. Read the reviews (and write your own) for all the applications you find! Thank for all your positive feedback! Please use our support link if you have questions and suggestions.

With this tool, the slope can be measured by all edges of the device and through the camera. The current features include:

◆ 3 Modes (incl. auto switching): Clinometer mode (auto when holding upright), Camera mode (any direction, manual activation) and Bubble level (smoothly fading in when holding flat).

◆ Relative angles: Besides measuring absolute angles, for every mode you can measure the relative angle between device positions

◆ Advanced two way calibration on all sides: For every 4 sides plus the bubble mode you can calibrate in two steps, which allows you to calibrate exactly even on non-level surfaces. Each direction can be calibrated individually to achieve the optimal precision.

◆ Five different unit modes: The device can display the slope in degrees (rounded or in tenth of degrees), percentage, rise over run (common for roof slope measurement in :12) and 1V:H (common in engineering)

◆ Dial Rotation: You can smoothly rotate the background dial and thus define which side of the device represents 0° and 90° degrees.

◆ Motion-sensitive Lock feature: Besides the common instant simple tap hold mechanism you can activate the motion-sensitive lock. If activated the device waits for the final lock until you hold your device steady enough for at least 2 seconds. You can set the lock sensitivity between 0.1° and 1.0° degrees.

◆ Fullscreen Mode: The full screen mode can be toggled by tapping the center of the screen and by the upper and lower arrows in the center. This prevents you from erroneous inputs while measuring.

◆ Different color schemes: Press the S/C Button to instantly switch the color. The color can be selected differently for the bubble and the clinometer mode. The predefined color sets include day and night color schemes (Black on White, White on Black and Red).

◆ Adjustable Auto-Lock: You can prevent the device from turning into the sleep mode.

For recreational use only. After the calibration it CAN (!) be very accurate especially for the main axis after calibration. The measurement is performed as well as possible (we try our best) by using the three inbuilt accelerometers.

THANK YOU FOR YOUR SUPPORT!

We will improve the application long-term.
Updated on
May 30, 2016

Data safety

Developers can show information here about how their app collects and uses your data. Learn more about data safety
No information available
4.3
52.5K reviews
A Google user
October 27, 2019
The thing works OK, but in the pictures for the description, it shows a bubble level (the one with the 45 on it) as well as the 360 degree level. The bubble one shows up randomly for a second or two, then leaves. I can't figure out how to set it to stay on. The rest of the app is fine and easy to use, but I knocked off two start for this problem and because I wrote the developer twice over two weeks and received no reply. Truthfully, when a developer wants money for ads to leave, that is fine & good- But if they don't reply to questions after they have your cash, that is no good. I took it off the phone. PS: If you feel the level is not accurate, it is most likely not the app's fault. It is more likely your phone's motion sensor. Try using the phone's calibration routine & the app's.
186 people found this review helpful
Did you find this helpful?
A Google user
April 12, 2020
Chose this over bubble level and smart protractor apps. Downloaded all 3 due to being over a million downloads and the other IMO don't have good user interface as this one. I like the little windows that get you closer to the angle that you,re hunting for. I like that it has the bubble feature as well when you lay the device flat on a table. I'm going to use this to set the differential pinion angle of my Jeep so I can get the correct caster with new adjustable control arms.
100 people found this review helpful
Did you find this helpful?
A Google user
February 19, 2019
Beautiful design giving the user as if dealing witha professional clinometer. the reality is : It is NOT. It gives a bit of an indication of the angle - level etc. But on the end of the day it all depends on the accuracy of the sensor in your phone / tablet. I use a very professional GETAC Z710 tablet for industrial use. Yet ... even that was 3 degrees off in all measurements in comparison with my factory calibrated clinometer. Off course there is a calibration function somewhere - but that is just a band-aid to be repeated in every new situation. But again: Hats off for the very very well executed design. A real winner if the tablet sensors were as good.
20 people found this review helpful
Did you find this helpful?

What's new

✔ Fix inverted Camera with Nexus 5X and 6P
✔ Fix sporadic crashes