Clinometer + bubble level

plaincode™

Contains adsIn-app purchases

About this app

This professional tool called Clinometer is the most precise (all you can get with some calculations) slope measurement tool for the device using all sides of the device plus the camera. It can be used for simple applications like aligning a frame as well as for more sophisticated fields of applications where an arbitrary slope needs to be measured exactly. Read the reviews (and write your own) for all the applications you find! Thank for all your positive feedback! Please use our support link if you have questions and suggestions.

With this tool, the slope can be measured by all edges of the device and through the camera. The current features include:

◆ 3 Modes (incl. auto switching): Clinometer mode (auto when holding upright), Camera mode (any direction, manual activation) and Bubble level (smoothly fading in when holding flat).

◆ Relative angles: Besides measuring absolute angles, for every mode you can measure the relative angle between device positions

◆ Advanced two way calibration on all sides: For every 4 sides plus the bubble mode you can calibrate in two steps, which allows you to calibrate exactly even on non-level surfaces. Each direction can be calibrated individually to achieve the optimal precision.

◆ Five different unit modes: The device can display the slope in degrees (rounded or in tenth of degrees), percentage, rise over run (common for roof slope measurement in :12) and 1V:H (common in engineering)

◆ Dial Rotation: You can smoothly rotate the background dial and thus define which side of the device represents 0° and 90° degrees.

◆ Motion-sensitive Lock feature: Besides the common instant simple tap hold mechanism you can activate the motion-sensitive lock. If activated the device waits for the final lock until you hold your device steady enough for at least 2 seconds. You can set the lock sensitivity between 0.1° and 1.0° degrees.

◆ Fullscreen Mode: The full screen mode can be toggled by tapping the center of the screen and by the upper and lower arrows in the center. This prevents you from erroneous inputs while measuring.

◆ Different color schemes: Press the S/C Button to instantly switch the color. The color can be selected differently for the bubble and the clinometer mode. The predefined color sets include day and night color schemes (Black on White, White on Black and Red).

◆ Adjustable Auto-Lock: You can prevent the device from turning into the sleep mode.

For recreational use only. After the calibration it CAN (!) be very accurate especially for the main axis after calibration. The measurement is performed as well as possible (we try our best) by using the three inbuilt accelerometers.

THANK YOU FOR YOUR SUPPORT!

We will improve the application long-term.

Ratings and reviews

Installed, found it a degree off compared to the physical inclinometer, did calibration, found instructions totally confusing. Step 1 tells you to hold steady hit button (ok), step 2 tells you to turn the device 180 deg then hit button again, but when you do it gives you a "wrong face" error. Tried a few times starting from different orientations, same result, gave up, uninstalled.

Just downloaded this to assist in setting up my astrophotography tripod. Being level is critical being able to track stars or other astronomical targets. Using Clinometer, the first night I went to setup my rig, it worked as described using the "Bubble Level." After leveling, I was the able to use the Clinometer to set the angle to match my latitude. This made finding Polaris much easier, as I just needed to adjust the star tracker right or left, panning to find and align.

Outstanding, simple; using it with telescope for easy declination settings and I couldn't be happier, especially the fact that it can be set in red theme for night vision. Thanks!

What’s new

✔ Fix inverted Camera with Nexus 5X and 6P
✔ Fix sporadic crashes