CVG Connect
500+
Downloads
Everyone
info
About this app
CVG Connect is the CVG application that allows users to remotely manage the Unica and One alarm control panels comfortably from their smartphone or tablet!
Through this application, the user can control various functions of the alarm system depending on the model of control unit installed. The Application provides for the control of up to 16 plants in Cloud, WEB, Tunnel or SMS mode.
The main features in Cloud, WEB and Tunnel mode are listed:
-Display the status, arm and disarm the individual areas of the system;
- Check for faults or anomalies;
-Check the presence and delete the alarm memory;
- View the status of the outputs and activate them;
- Take photos if there are sensors with a camera;
-Access the history of events, and view any associated photos;
- View the status of the system zones and possibly enable / disable them;
- View information on the SIM and the GSM signal level of the control panel;
The main features in SMS mode are listed:
-Display the status, arm and disarm the individual areas of the system;
- View the status of the outputs and activate them;
- View information on the SIM;
Application working with all Android versions after 2.2 on both smartphones and tablets. Both vertical and horizontal operating modes.
For the connection from the central alarm side, a WAN connection is required for the WEB mode and / or a GSM connection for the SMS mode.
Router port to open: 8002.
For connection in Tunnel mode, the alarm control unit must remain permanently connected to the Internet and must be set in "Always Connected" mode. The connection from the app to the alarm control unit takes place via a Sicep MvsNET operating center. The Sicep MvsNET operations center must send an email to the smartphone containing an attachment for configuring the Tunnel mode. This attachment must be opened with the app.
Firmware version required on the Unica control unit: 1.2.0.B121 or later.
Default pin: 12345
Keywords: Sicep, Security, Single, One, Central, Anti-theft, System, System, Alarm, Insert, Control, Remote, Home Automation, GSM, GPRS, SMS.
Through this application, the user can control various functions of the alarm system depending on the model of control unit installed. The Application provides for the control of up to 16 plants in Cloud, WEB, Tunnel or SMS mode.
The main features in Cloud, WEB and Tunnel mode are listed:
-Display the status, arm and disarm the individual areas of the system;
- Check for faults or anomalies;
-Check the presence and delete the alarm memory;
- View the status of the outputs and activate them;
- Take photos if there are sensors with a camera;
-Access the history of events, and view any associated photos;
- View the status of the system zones and possibly enable / disable them;
- View information on the SIM and the GSM signal level of the control panel;
The main features in SMS mode are listed:
-Display the status, arm and disarm the individual areas of the system;
- View the status of the outputs and activate them;
- View information on the SIM;
Application working with all Android versions after 2.2 on both smartphones and tablets. Both vertical and horizontal operating modes.
For the connection from the central alarm side, a WAN connection is required for the WEB mode and / or a GSM connection for the SMS mode.
Router port to open: 8002.
For connection in Tunnel mode, the alarm control unit must remain permanently connected to the Internet and must be set in "Always Connected" mode. The connection from the app to the alarm control unit takes place via a Sicep MvsNET operating center. The Sicep MvsNET operations center must send an email to the smartphone containing an attachment for configuring the Tunnel mode. This attachment must be opened with the app.
Firmware version required on the Unica control unit: 1.2.0.B121 or later.
Default pin: 12345
Keywords: Sicep, Security, Single, One, Central, Anti-theft, System, System, Alarm, Insert, Control, Remote, Home Automation, GSM, GPRS, SMS.
Updated on
Safety starts with understanding how developers collect and share your data. Data privacy and security practices may vary based on your use, region, and age. The developer provided this information and may update it over time.
What's new
-Aggiunto Cloud Sicep e ricezione notifiche push
-Aggiunte funzioni per il controllo di motori
-Aggiunta la gestione dei fumogeni
-Aggiunta pagina Vigilanza
-Aggiunta opzione IP locale
-Aggiunto riconoscimento impronta
-Aggiunta funzione "On Demand"
-Correzione bug minori
-Aggiunte funzioni per il controllo di motori
-Aggiunta la gestione dei fumogeni
-Aggiunta pagina Vigilanza
-Aggiunta opzione IP locale
-Aggiunto riconoscimento impronta
-Aggiunta funzione "On Demand"
-Correzione bug minori
App support
phone
Phone number
+390556232011
About the developer
SICEP SRL
support@sicep.it
VIA DON GIOVANNI CALABRIA 14
50052 CERTALDO
Italy
+39 327 750 7783
