Stave Angle Turner

KARLIN

About this app

Stave Angle Turner plans segmented turnings from a single drawing. Draw a vessel's half-profile and get every ring, miter angle and board length you need before the first cut.

SHAPE THE PROFILE
Drag spline points on a half-profile to shape a bowl, vase or hollow form. The ring stack and the finished segmented vessel update together as you drag, so you see the result while you design.

EVERY RING, WORKED OUT
The vessel is sliced into rings one board thick, each sized for wall thickness plus a safety margin. Each ring lists blank and hole diameter, segment count, a 180/n miter angle, outer and inner segment length, and strip width.

FEATURE RINGS AND BRICK-LAY
Build feature rings that alternate up to six wood species around the ring. Brick-lay offsets rotate alternate rings by half a segment.

CUT LIST AND BOARD FEET
Board length per species includes saw kerf and end waste, totalled in board feet, so you know how much walnut, maple or other stock to buy.

FIVE CLEAR TABS
Profile, Rings, Cut list, Woods and Preview keep the design, the numbers and the finished look one tap apart.

MILLIMETRES OR INCHES
Switch between millimetres and fractional inches at any time.

PRIVATE AND QUIET
Stave Angle Turner works fully offline and needs no internet connection. There are no ads and no sound. Your design is saved on the device.

What’s new

Stave Angle Turner